注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

突击收割500螺距3D四轴飞行器(KIT)

突击收割500螺距3D四轴飞行器(KIT)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 375.29
Rating:
Stock:
重量:
1933
SKU:
9198000395-0

Price War

产品介绍

寻找打破所有规则的多旋翼模型?

死神500是一款全3D的,集体的间距已设置特技辑阵旋翼飞机的新标准四轴飞行器。这是能够许多3D演习,如循环,滚动,倒飞,漏斗和更多的高性能典范!

收割者设有掺入使用单个马达的电力系统的驱动所有四个转子革命性的框架设计。动力通过一个中心轴在每个吊杆内部驱动皮带传输。这是个非常时尚和高效驱动系统,同时尽量减少使用外部移动部件。

收割机500的变桨旋翼设计使飞行员完全控制正反两方面的球场,非常类似于3D直升机型号。这开辟了演习这是根本不可能与传统的固定摊位的多旋翼飞行器的一个全新的世界。

突击收割飞行控制器的设计形式地专门为在这个模型中使用,在一个超级简单易用的封装提供卓越的飞行性能。有便于访问控制单元的顶部转盘允许模型的飞行特性微调(调整不需要PC连接),如增加或减少翻页/侧倾率和陀螺增益。

这是收割者包括飞行控制器的“工具包”的版本。您将需要组装的模型,并添加自己的电机,ESC,伺服系统和无线电系统。请参阅以下所需物品。

特征:
•预调高性能飞行控制器
•全3D功能 - 循​​环,滚动,倒飞和更多!
•独特的框架和驱动系统从底层向上设计
•内部景气皮带驱动系统。无外部皮带/皮带轮!

眼镜:
类型: 集体俯仰电动3D四轴飞行器
旋翼直径:118毫米
长度:635毫米
宽度:365毫米
重量:986克(瓦特/电池)
飞行重量:1240克(W /纳米技术6S 1550mAh电池)

包括:
突击收割500 3D四轴飞行器套件
飞行控制器
用户手册
组套工具

需要:
6CH发射器和接收器(发射器与直升机的编程能力)
高速数字园区规模舵机(金属齿轮推荐)×4
1500〜1800mAh的6S 22.2V电池Lipoly
28〜30毫米无刷电机(450直升机的大小)×1
40〜60A无刷电调×1
Lipoly电池充电器

Product
Specifications

额外信息

  • 商品编号:
    9198000395-0
  • Brand:
  • 重量(g)
    1933.00
  • 长度
    490.00
  • 宽:
    105.00
  • 高度:
    255.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Many of the parts for the Reaper are on backorder and have been for months. This includes things like the frame arms and belts. Also the belts are easy to damage but hard to change. Two of my wrecks occurred when a belt broke in flight. I haven't been able to repair the damage because the parts are not available. Based on the part numbers this item is made by Walkera and like all Walkera aircraft I have purchased the electronic control system is weak, they manage to stabilize the aircraft but are not robust. Also the Reaper flies like a brick. I don't recommend it.
Quality
Value
Overall
Quality
Value
Overall
Hello, I bought the reaper500 two weeks ago and able to set the servos 3, 4 servos should theoretically push outwards when I ask pitch up! No. 3 grows inside.

RX / TX eurgle 9x, I try to reverse the servos 1 by 1 (TX) and debugg mode on the flight controller, I can not reverse what has Cervos 3 ...?

someone help me ?
Quality
Value
Overall
Quality
Value
Overall
follow up on assault..... after a session of look and see somethings to be careful of are: When Alining the blades make sure they are parallel to each other, as though tracking a set blades on a heli, but in this case, fold them back so they point in same direction. If they are not, adjust linkage, till they are flat. Make sure every thing was zeroed before setting the 90pcnt arm. one other thing, make sure the bearing on head/gear is on outside of each belt arm.....these are a couple of things that bear attention
Quality
Value
Overall
Quality
Value
Overall
Received Assault quad, all parts are packed and labeled. Instructions were very good and when used with orange radio and receiver, unit worked as expected. I used a thunder tigre
motor 3700 kv 450 heli 3.17 shaft. Also used a 50 amp castle esc. and initially used a 2200 mah 3 cell. I ordered the corona digital metal 9s servos. When first starting couldnt get unit to work. I had bound rec before i started, this wouldnt work for me, i had to hook every thing up and bind as a unit, The blades were running backwards, but this was easy to change. reversed 2 wires to esc, and wahoo it worked. overall an easy to do kit. Pay attention to manual and use common sense......nice kit......thanks HK
Quality
Value
Overall
Upload
Videos
  • Assault Reaper 500 Collective Pitch 3D Quadcopter

  • Assault Reaper 500 Collective Pitch 3D Quadcopter

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。