New Items 新闻 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

B-17G自由佳丽EPO1875毫米(PNF)

B-17G自由佳丽EPO1875毫米(PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
310000112
WANT FREE SHIPPING? Click here to find out more!

这种B-17G是由航空爱好者唐布鲁克斯,谁形成了自由基金会表现出平面自由佳丽购买。修复开始于1992年与另一部分受损的B-17(44-85813),由汤姆·赖利和公司/飞虎队Warbird恢复博物馆(又名“Bombertown USA”),位于当时在基西米网关场,基西米,佛罗里达州进行。她回到了空气中于2004年12月8日,并已参观航展电路至今。

可悲的是,她失去了于2011年6月13日上午,百丽自由奥斯威戈,伊利诺伊州迫降,在Sugar Grove,伊利诺斯从奥罗拉市机场起飞后。不久起飞后,一个T-6德克萨斯追飞机的飞行员通报自由佳丽试点的B-17内侧左翼着火,并建议立即降落。轰炸机在附近的场成功着陆和七人全部遇难能够无伤撤离,但由于泥泞的地面消防车无法达到它......

这个巨大的插头和飞B-17赞扬自由佳丽。非常简单和快速组装,所有的舵机与ESC的预装。它是由EPO的泡沫制成,因此它是坚韧的,你会exepect并作为1个翼是可移除的,这也是实际的。预配电动缩回和车轮大到足以应付几乎任何表面和动力充沛的自来水从四个无刷电机旋转反向旋转的道具,顺利起飞的都不在话下,预配分瓣确保着陆也是免费的戏。

有大量规模细节上的报价,其中包括枪支和炮塔球,普惠Whittney“引擎”,三刃规模道具,工作导航与着陆灯等。我们广泛这种飞行的B-17,很容易飞那么的优雅,规模传单的梦想,这种模式有真实的存在于空气,势必将成为你的飞机场的明星!

眼镜:
翼展:1875毫米
长度:1350毫米
飞行重量:2750克
电机:4×700kv无刷电机外转子
ESC:4×20A ESC
舵机:6×9克伺服
起落架: 电动缩回

包括:
所有的Y-线索

说明
2个备用螺旋桨
对于ESC / Lipoly平行的引线

要求:
7通道发射机和接收机
2个3S 11.1V 2200mAh的3000mAh的〜电池Lipoly

  • SKU 310000112
  • Brand -
  • 容量(mAh) -
  • 重量 5305.0000
  • 长度 1360.00
  • Packaging Width 260.00
  • 高度 480.00
  • B-17G Liberty Belle

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

awsom plane,at the ground or in the air no matter,looks and fly great,,some built time but all i all no problem,,love it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awsom plane,at the ground or in the air no matter,looks and fly great,,some built time but all i all no problem,,love it

Ordered thru the Australian warehouse it arrived in good condition. Its an easy assembly and does not take very long. Taking advice from other reviews I ordered a full set of Master Airscrews at the same time. I fitted the standard blades & the very first time I ran the motors up one prop exploded from the hub damaging the engine cowling of the next engine.
My advice, DO NOT USE STANDARD PROPS. immediately replace with a full set of master props. Bear in mind there are absolutely no spare parts available for this plane except the crappy and potentially dangerous standard props. The total lack of spares will eventually be the undoing of what is actually a great aeroplane. One change I made when assembling was to mount the receiver fully connected then velcroed to the centre of the wing. I then cut out a large rectangular opening in the fuse where the wing sits to accommodate the receiver and wiring. This means I only have to connect two plugs to the receiver, elevator and rudder and feed the two battery leads into the cockpit area where the batteries live. Makes fitting the wings a two minute job and keeps all the wiring really neat and all on the wing, simple. To fit the replacement props I used TWO nuts tightened on the motor shaft. The prop goes on next with a third nut to tighten the prop on the first two nuts to locate it. The nuts form a tight fit into the pr

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered thru the Australian warehouse it arrived in good condition. Its an easy assembly and does not take very long. Taking advice from other reviews I ordered a full set of Master Airscrews at the same time. I fitted the standard blades & the very first time I ran the motors up one prop exploded from the hub damaging the engine cowling of the next engine.
My advice, DO NOT USE STANDARD PROPS. immediately replace with a full set of master props. Bear in mind there are absolutely no spare parts available for this plane except the crappy and potentially dangerous standard props. The total lack of spares will eventually be the undoing of what is actually a great aeroplane. One change I made when assembling was to mount the receiver fully connected then velcroed to the centre of the wing. I then cut out a large rectangular opening in the fuse where the wing sits to accommodate the receiver and wiring. This means I only have to connect two plugs to the receiver, elevator and rudder and feed the two battery leads into the cockpit area where the batteries live. Makes fitting the wings a two minute job and keeps all the wiring really neat and all on the wing, simple. To fit the replacement props I used TWO nuts tightened on the motor shaft. The prop goes on next with a third nut to tighten the prop on the first two nuts to locate it. The nuts form a tight fit into the pr

Received my Liberty Belle yesterday and assembled the basic airframe last night. Plane looks great and the finish is very nice. This thing is very big.... Will have to see how I get it to the field and back :-).

Quality of the parts look very good to me, off course I haven't flown it yet, but it looks and feels very good. Retracts work good to and look very sturdy. I'm planning on fitting them somewhat deeper in the nacelle (for looks), but for now this will do. During testing however one of the two was acting somewhat strange, but after a few tries it started functioning normally (it reversed once - after remainig in when I activated the retracts it came out when I retracted the other one after that it refused to work - I powercycled and the quirk disappeared). Motors look exactly the same as the motor for the Arttech spitfire, ESCs have 3A UBECs (that's what it says on the labels). During my testing the ESC became somewhat hot when there was no motor connected, so only powering the BEC and the retracts - maybe the retracts use a lot of juice and is that an explanation for the strange behavior.

All in all I think this is a great plane for a very nice price point. I'm going to spend some time to check everything and make it to my liking, but that's the point of the hobby.

My biggest minus for now is the main wing, it has no reinforcement whatsoever. Also no cavities for rein

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my Liberty Belle yesterday and assembled the basic airframe last night. Plane looks great and the finish is very nice. This thing is very big.... Will have to see how I get it to the field and back :-).

Quality of the parts look very good to me, off course I haven't flown it yet, but it looks and feels very good. Retracts work good to and look very sturdy. I'm planning on fitting them somewhat deeper in the nacelle (for looks), but for now this will do. During testing however one of the two was acting somewhat strange, but after a few tries it started functioning normally (it reversed once - after remainig in when I activated the retracts it came out when I retracted the other one after that it refused to work - I powercycled and the quirk disappeared). Motors look exactly the same as the motor for the Arttech spitfire, ESCs have 3A UBECs (that's what it says on the labels). During my testing the ESC became somewhat hot when there was no motor connected, so only powering the BEC and the retracts - maybe the retracts use a lot of juice and is that an explanation for the strange behavior.

All in all I think this is a great plane for a very nice price point. I'm going to spend some time to check everything and make it to my liking, but that's the point of the hobby.

My biggest minus for now is the main wing, it has no reinforcement whatsoever. Also no cavities for rein

The model looks impressive on the ground, has great presence in the air and is very realistic in flight. Plenty of power available, great sound from four props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The model looks impressive on the ground, has great presence in the air and is very realistic in flight. Plenty of power available, great sound from four props.

I just got it in was less than 2 weeks and hell yea im excited about getting it in the air, ! question tho, is there a way to get the landing lights to STOP flashing and just stay on ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just got it in was less than 2 weeks and hell yea im excited about getting it in the air, ! question tho, is there a way to get the landing lights to STOP flashing and just stay on ?

Just completed 5th flight and I am loving this plane. It took a day to assemble as I checked every part to ensure proper functionality. After reading other reviews I didn't try to use the stock props and used MAS props with parkzone spinners from the start. Looks just as great in the air as it does on the ground. Flies like a dream and is very easy to land. I am using 2 Turnigy nano-tech 2200mah 3S 25~50C Lipo Packs and get about 5 minuets flying time with 30 pcnt charge left and found you only need 1/2 throttle for a good scale flight. Excellent plane HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just completed 5th flight and I am loving this plane. It took a day to assemble as I checked every part to ensure proper functionality. After reading other reviews I didn't try to use the stock props and used MAS props with parkzone spinners from the start. Looks just as great in the air as it does on the ground. Flies like a dream and is very easy to land. I am using 2 Turnigy nano-tech 2200mah 3S 25~50C Lipo Packs and get about 5 minuets flying time with 30 pcnt charge left and found you only need 1/2 throttle for a good scale flight. Excellent plane HK.

there are no "Live Chat" services. And my request is over 4 days old. Come on people how about some customer service.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

there are no "Live Chat" services. And my request is over 4 days old. Come on people how about some customer service.

When I received this aircraft it look great in the box with everything taped down. I managed to find a couple of lipos I also ordered buried in the box. Everything looked fine so the box was put away until my birthday, July 4, Really

Easy to put together. Instructions were fine. Plane looks great except there was no ball turret or guns in the box!!!! It seems when they put in the batteries they took out the ball turret and guns.

I have requested the parts two days ago and my request has not been assigned yet in their 24X7 support.

I expect them to send the parts without and issue. We will seen. Until then the maiden flight is on hold.

If they give good services on this issue I will increase my rating, but since they have not assigned the problem yet I am concerned.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When I received this aircraft it look great in the box with everything taped down. I managed to find a couple of lipos I also ordered buried in the box. Everything looked fine so the box was put away until my birthday, July 4, Really

Easy to put together. Instructions were fine. Plane looks great except there was no ball turret or guns in the box!!!! It seems when they put in the batteries they took out the ball turret and guns.

I have requested the parts two days ago and my request has not been assigned yet in their 24X7 support.

I expect them to send the parts without and issue. We will seen. Until then the maiden flight is on hold.

If they give good services on this issue I will increase my rating, but since they have not assigned the problem yet I am concerned.

I received my B-17 from USA warehouse in great condition. This plane is big. I also ordered replacement Master Airscrew 9X6X3 for imporved prop performance over 1/2 throttle.
So far things look good. I am creating space in my workshop to build. I would like to add pilots if possible.
I will update as the build / flights progress.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received my B-17 from USA warehouse in great condition. This plane is big. I also ordered replacement Master Airscrew 9X6X3 for imporved prop performance over 1/2 throttle.
So far things look good. I am creating space in my workshop to build. I would like to add pilots if possible.
I will update as the build / flights progress.

Maidened mine today with no problems. Needed no trim whatsoever and flies beautifully. Running MAS 9x7x3 props on 2 x 3S 2200. Got tops of 5 min flights. Will maybe try 4S 4000 next time. Had 3 more enjoyable sorties and very, very happy.Landings are a breeze and I found flaps not required at all.Looks great, flies great.Happy days.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maidened mine today with no problems. Needed no trim whatsoever and flies beautifully. Running MAS 9x7x3 props on 2 x 3S 2200. Got tops of 5 min flights. Will maybe try 4S 4000 next time. Had 3 more enjoyable sorties and very, very happy.Landings are a breeze and I found flaps not required at all.Looks great, flies great.Happy days.

  1. 1
  2. 2
No File Name Download [89]
No File Name Download [89]
No File Name Download [93]
No File Name Download [89]
No File Name Download [89]
No File Name Download [93]
No File Name Download [93]
No File Name Download [90]
Battery/Receiver Install. Download [2110]
No File Name Download [3340]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking