注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

BAE鹰 - 红箭70毫米EDF喷气包 - 白色素(EPO)

BAE鹰 - 红箭70毫米EDF喷气包 - 白色素(EPO)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 91.91
Rating:
Stock:
重量:
3717
SKU:
TS829-B-kit

Price War

产品介绍
一个优秀的parkflyer大小EPO飞机。 BAE公司的鹰EDF飞机自带的90%预先构建​​的,只包括你自己的无刷电机,伺服系统,ESC,电池和无线电齿轮(TX / RX)。则需要3×9克伺服系统,一个用于电梯,一个用于副翼,一个用于可转向前轮。由于BEA鹰射流从EPO制成,这是非常耐破损和光崩溃将逐字反弹。该材料也容易维修且相当灵活。

规范:

翼展:990毫米
长度:1100毫米
飞行重量:630克
电机:2826 3200kv(必填)
ESC:25A(必填)
伺服:9克* 3件(必填)
电池:1600mAh的3S1P 20C Lipoly包(必选)
EDF直径:70毫米(包括)

需要:
你自己的TX与RX(带V型混合)
电机:2826 3200kv
ESC:25A
伺服:9克* 3件
电池:1600mAh的3S1P 20C Lipoly包
Product
Specifications

额外信息

  • 商品编号:
    TS829-B-kit
  • Brand:
  • 重量(g)
    3717.00
  • 长度
    1035.00
  • 宽:
    240.00
  • 高度:
    340.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought one placed a 3200 4s battery and a doctor mad thrust 70mm 11 blade edf. Turnigy 60 amp esc had to trim the foam cover a little for fit. Added 3 quarters of an ounce of weight at the rear. She flies amazingly stable. Able to fly her in 15mph wind gust no problem.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane,
price performance better you can find.
I have used it with 12 blade fan, great! but is good also with orginal fan.
I have modified it with retract.....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just maiden this plane today.. its need 4 cell setup edf.. i have use chengsun 6 blade edf 2800kv motor. Fly very well
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very pleased with performance of this model (after a few modifications) I've upgraded the fan and motor which required the engine hatch to be cut larger to accommodate longer more powerful edf motor. Now getting about 4 mins flight with 3000mah battery and ten blade fan unit. I found the elevator push rods to be awkward to fit alongside wiring in upper fuselage so cut servo holes and mounted a small servo on each side to activate elevators. Model flies very smoothly but dual rates will probably be needed on elevator. There is no prop wash the elevator authority is limited when trying to land with little power. My first EDF and I'm well pleased with it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice model for the price but instructions very poor. A suggested COG position would have been nice. I fitted original fan with motor suggested but balance of fan was a bit out despite my attempts to balance it. Power was also limited so I upgraded fan and motor and opted for 4s system with 12 bladed fan. Time will tell if it was a wise move. ( Yet to fly it ! ) Nose cone is very thin and spoils the overall appearance of what is otherwise a nice looking model. Also chose to fit two 9g servos instead of Y shaped push rod which I considered may get caught up in the esc / motor harness. A good model to do a bit of edf testing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ciao Gianhulk ho lo stesso modello , ho volato con 6 celle pero , due da 3 celle da 2200 perche non potevo indetreggiare le batterie in quanto al centro c il telaio di legno. tempo di volo 3 minuti .PUOI mandarmi qualche foto o video di come sono messe le batterie? ciao grazie
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i think this jet is amazimg..(amazing price, flight character,...etc)
it can fly very slow speed and easy to fly, in other word the max speed is not your expectation ,(i not sure what speed is lowest speed. just could fly stable in lower speed)
my set up is stock fan, 2836-3200kv turnigy motor, 55A dlux esc(too heavy & over spec' perhaps 40amp esc is enough) and 3s 2200 35c~ lipo, modify rudder system. Total weight is about 920g(include 200g battery),
It was possible idle thrust landing as lower wing scale model plane

In spite of many positive things there are few negative things 1st of all nose cone is flimsy,2nd landing gear steel rod bended every takeoff & landing, 3rd stock fan is very weak & unbalanced, 4th edf maintenance hatch too small. have to cut rear fuselage to esay access(advenced edf unit can't install without cutting fuselage)

After maiden flight i decided to mod power system ( will chang esc 40A and Fan unit & motor) becouse of stock fan was break into thousands pieces and vomit the pieces from the air intake...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good Quality, easy to fly and good to land on grass without Landing Gear!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
muy buen entrenador,primer avion que vuelo , y perfecto, y excelente precio
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very well packed, nice size Aeroplane.
Finish of the foam is also very good.
Like many other purchasers of the plane the red nose cone is missing.
I would have thought that with the amount of missing nose cones Hobbyking would check these kits before dispatch.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • BAE Hawk Red Arrow 70mm EDF 6S 12B

  • BAE Hawk Red Arrow 70mm EDF 4S 12B on 6Smotor

  • HK BAE Hawk in good outrunner jet sound!

Upload
Files

产品标签

使用空格分隔标签。使用单引号(')标注词组。