New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

BL 2030-16无刷电机内转子5800kv

BL 2030-16无刷电机内转子5800kv

Shipped From:
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 18.98
状态:
有货
SKU:
244000009
WANT FREE SHIPPING? Click here to find out more!

BL 2030-16无刷电机内转子5800kv

产品规格:
电池:2S / 7.4V(42900转)
RPM:5800kv
空载电流:1.2A
尺寸:20毫米点¯x32毫米,48毫米(带轴)
重量:49克
轴直径:2毫米
前轴长度:12毫米

适用于小型EDF或微型无刷汽车。

  • SKU 244000009
  • Brand Other
  • 重量 62.0000
  • 长度 95.00
  • 50.00
  • 高度 55.00
  • 千伏(转/ v)的 5750.00
  • 最大电流( A) 1.20
  • 电阻( MH) 75.10
  • 最大电压(V) 8.00
  • 功率(W) 9.60
  • 轴(MM) 3.00
  • 长度B (毫米) 30.00
  • 直径C(毫米) 20.00
  • 可以长深(mm ) 35.00
  • 总长度E(毫米) 48.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought it as a replacement for the 1/18th Stadium Truck

You can use the BL 2030-16 but you will need 2.5mm screws (not included - 6mm long) work on the motor mount (make a 10mm center hole filing the holes to match the motor ones) Pinion must be pushed further than the axis wants it to (there is a flat place for the grub screw which can't be used)

So it is possible but not a drop in replacement at all

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought it as a replacement for the 1/18th Stadium Truck

You can use the BL 2030-16 but you will need 2.5mm screws (not included - 6mm long) work on the motor mount (make a 10mm center hole filing the holes to match the motor ones) Pinion must be pushed further than the axis wants it to (there is a flat place for the grub screw which can't be used)

So it is possible but not a drop in replacement at all

Poor shaft quality, shaft break at the first run on edf 48mm.
any probleme with my walkera 2040 3200kv.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Poor shaft quality, shaft break at the first run on edf 48mm.
any probleme with my walkera 2040 3200kv.

Any high kV high revving motor like these will easily suffer heat problems if cooling is not provided.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Any high kV high revving motor like these will easily suffer heat problems if cooling is not provided.

i used this motor for my racing buggy 1:16, very fast,... but after 10 minute, the shaft is broken... :(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i used this motor for my racing buggy 1:16, very fast,... but after 10 minute, the shaft is broken... :(

insane motor on the 118B truck! a little more top speed than the stock motor. it still flys over the ground. the stock motor on the 118B is 5500KV this motor is insane (on 2S as the car would not need or take 3S)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

insane motor on the 118B truck! a little more top speed than the stock motor. it still flys over the ground. the stock motor on the 118B is 5500KV this motor is insane (on 2S as the car would not need or take 3S)

this is a good motor for 1/18 scale racing. im going with the 1/18 th scale 18amp speed controller for this motor what a great value!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is a good motor for 1/18 scale racing. im going with the 1/18 th scale 18amp speed controller for this motor what a great value!

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!