New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

BMS-2514无芯数字化合金齿轮舵机 - 33.2千克/ 0.13s / 7.4V(高压)

BMS-2514无芯数字化合金齿轮舵机 - 33.2千克/ 0.13s / 7.4V(高压)

Discontinued Product

Please continue searching for a similar product.
重量:
160
SKU:
BMS-2514
WANT FREE SHIPPING? Click here to find out more!

该BMS-2514是高电压(7.4V)无芯数字伺服特色钛齿轮和铝散热片的情况下。该BMS-2514包括一个重型伺服喇叭集。

规范:
重量:69克
外形尺寸:40.5×20×39毫米
扭矩@ 6V:27.1公斤/厘米
扭矩@ 7.4V:33.2公斤/厘米
速度@ 6V: 在无负载0.16sec / 60度
速度@ 7.4V: 在无负载0.13sec / 60度

特征:
铝制散热器案例
钛齿轮
空心杯电机
数字伺服
双滚珠
JR型连接器
兼容2S Lipoly(7.4V),6节镍氢及2细胞A123(6.6V)。

在该BMS-2514是在台湾生产,并建议为所有应用的高性能伺服系统。

  • SKU BMS-2514
  • Brand -
  • 重量(g) 160.00
  • 长度 66.00
  • 11.00
  • 高度 33.00
  • 扭矩(公斤)(最少0.01公斤) 33.20
  • 速度(秒/ 60deg ) 0.13
  • A(毫米) 43.00
  • B(毫米) 40.00
  • C(毫米) 38.00
  • D(毫米) 20.00
  • E(毫米) 54.00
  • F(毫米) 28.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.

This servo are dead after 6 onths on my little axial scx10.

Pinion hs...not good quality like savor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo are dead after 6 onths on my little axial scx10.

Pinion hs...not good quality like savor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

.

.

servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones

montado en mi Gmade R1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones

montado en mi Gmade R1

Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.



I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.



I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.

Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.

awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.

It's a very strong and accurate servo.

I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.

I'm very happy with this servo!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a very strong and accurate servo.

I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.

I'm very happy with this servo!

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save