注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

BMS-385DMAX数字伺服(合金装备)4.2千克/ .15sec /16.5克

BMS-385DMAX数字伺服(合金装备)4.2千克/ .15sec /16.5克

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 25.63
Rating:
Stock:
重量:
38
SKU:
BMS-385DMAX

Price War

acc
产品介绍
BMS-385DMAX数字伺服(合金装备)4.2千克/ .15sec /16.5克
此伺服被设计的R / C滑翔机应用中使用。通过使用碳尼龙齿轮和优化齿轮的曲率,齿轮能够承受大量的力。
伺服自动学习用户'的发射脉冲时序和每一次锁定信号。伺服还包括与故障安全功能在CPU中的信号缓冲器。
伺服配备了一个配件包和通用JR /海泰克“S”连接器,它在物理上是与全球范围内销售的所有主要品牌的接收电兼容。

1. M9.6球轴承(SI-油)
2.低信号特强扭矩的影响和成功获得CE认证。
3,橡胶密封件防水情况
4.设计中的R / C滑翔机应用中使用。
5.双叶兼容25齿铝6061输出花键
6.超方PWM信号数字电机驱动
7.自动确定伺服中心脉宽
具有透光性强C95材料结合铝6061材料8金属齿轮
9.故障安全功能
10.数字控制IC - SOP封装,12位数据传输
11. MOS-FET电机驱动芯片,能够处理7A峰值负载
12.可用6.0V上

重量:16.5克/0.59盎司
外形尺寸:26×13×26毫米/ 1.16倍0.51点¯x1.02英寸
扭矩4.8V:4.2公斤/平方厘米,有57盎司/英寸
扭矩6.0V:4.7公斤/平方厘米,有62盎司/英寸
速度4.8V:在无负载0.15sec / 60度
速度6.0V:在无负载0.13sec / 60度
Product
Specifications

额外信息

  • 商品编号:
    BMS-385DMAX
  • Brand:
  • 重量(g)
    38.00
  • 长度
    70.00
  • 宽:
    35.00
  • 高度:
    60.00
  • 速度(秒/ 60deg )
    0.13
  • 扭矩(公斤)(最少0.01公斤)
    4.70
  • Unit Weight (g):
    16.5
  • A(毫米):
    37.00
  • B(毫米)
    27.00
  • C(毫米)
    31.50
  • D(毫米):
    13.00
  • E(毫米):
    36.00
  • F(毫米)
    20.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Used this for my tricopter since its a fairly strong servo with replacement gears available. Its held up well in a few crashes, haven't needed to replace any gears yet.
Quality
Value
Overall
Quality
Value
Overall
My first negative review. Brought a while back for a tricopter. Had a few minor spill, nothing major. Went to fly it yesterday now that it is warm and the gears must be stripped. Not replacing it with one of these.
Quality
Value
Overall
Quality
Value
Overall
Came well packed and worked out of the box! Little noisy but pretty precise. Using it on a DIY RCExplorer TriCopter and works flawlessly. Doesn't heat up or lose it's sync! Feels very robust too. Recommended.
Quality
Value
Overall
Quality
Value
Overall
I just posted a review where I state that the top gear on this servo is silver-colored plastic. I was wrong, it is made of aluminum (which is pliable and therefore, when I tore it apart, initially looked like it was plastic). Mea culpa.
Quality
Value
Overall
Quality
Value
Overall
I am using this servo in my Talon Tricopter. It worked perfectly until I had a bad crash and stripped some gears. Not the servo's fault. However, when I bought the replacement gear set, I discovered that a replacement ball bearing set is not included in the bag. If you happen to damage the top gear, where the ball bearing set seats, you will find it is almost impossible to remove the ball bearing set without destroying it. Therefore, if you damage the top gear (which is silver and looks metal but is in reality silver-colored plastic), you cannot replace it because you can't remove the ball bearing set to install it on the replacement gear. The gears that get stressed lots are metal; two other gears are plastic (one black plastic and one silver-colored plastic). I liked this servo a lot, but would love it if HK would include a replacement ball bearing set with the replacement gear set. As I understand it, usually people only strip that one black plastic gear, which is very easy to replace. I ended up buying an identical servo to replace the old one, simply for the lack of a replacement ball bearing set.
Quality
Value
Overall
Quality
Value
Overall
Good servo, although thought it might be a bit slow.
Quality
Value
Overall
Quality
Value
Overall
Worked well with my 2nd rcexplorer.se tricopter build...had some problems with other servo before (from another online seller), but this one has been working well for a while now!!! bought some more for spares, and i think they will be in the shelve for a while until the next build...
Quality
Value
Overall
Quality
Value
Overall
I am really impressed with these BMS 385D-Max servos. They are my default option for flaps on my homebuilt "Scratcho" moulded 64" gliders used for slope soaring and dynamic soaring. I've used more than 14 of them and had great success. I don't think I've ever had one fail, except after a huge crash and many of them have survived enormous crashes and are still being re-used. I put a lot of hours into flying these planes and fly them hard so it's a pretty good test. I actually can't believe how solid and strong they are for the price. I've even fitted them into a 3.3m heavy slope glider with huge flaps, DSed it and they were perfect. I try to convince other guys to give them a try but I think they're a bit suspicious that they must be crap for such a good price, but they're not - they're tough, long lasting, reliable, perfect centring, fast enough and have plenty of grunt. Excellent. My standard setup for every Scratcho except the very lightest and the very heaviest ones is BMS385's on flaps and Bluebird 555's on ailerons. The 385's are good for rudder/ elevator on big mouldies too.
Quality
Value
Overall
Quality
Value
Overall
perfect servo. Used in on my tricopter!
Quality
Value
Overall
Quality
Value
Overall
I haven't got a good review for this cause I fry it with out even knowing don't know how it happen
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。