BMS-860DMAX + HS冠军高性能数字伺服（合金装备）18.8千克/ .18sec /54克具有以下特点来;曲线齿轮平稳双滚珠轴承（SI-油）3极电机具有低信号的强扭矩的影响和成功获得CE认证橡胶件案例防水重型伺服情况散热片中间通过数字信号设计，100％装配方PWS自动措施中央毫秒ALU 6061金属齿轮材料与光C95材料轻，足够强大数字集成电路（SOP封装，12位传送数据）MOS-FET驱动器（意气风发驾驶能推过7A功率）重量：54克/1.84盎司
速度（秒/ 60deg ）
Unit Weight (g):
EmpfehlenswertDepois de muita pesquisa acho que achei o servo certo para os aeros de 50cc. Pelo visto e pelos posts esse servo muito bom e seu custo nao e tao fora do normal. Vamo agora comprar de 2 em 2 pq a receita federal ta pegando pesado. kkkkFirst of I ordered through Express mail and received the order very quickly.
The servo is all I hoped for. I'm using it as a sail servo on a 1m boat. Reaction time is appropiate for any sailboat and has plenty of power to haul my sails in every on the strongest gust. Added bonus was that it is lighter than the stock servo. It has a Futuba Spline for Arms but a Universal style connector. Plugged into my Tactix receiver and worked fine. Did overheat a bit my AA batteries but that is what I get for not upgrading batteries too. Overall i'm perfectly happy with the servo.I just recieved this servo and build in a Cen Gst 7.7 for steering servo... Any other servo can't move the wheel standing position, but this can... I reccomend this, and hopeing it will serving for a long time.
My reciever is a Spektrum Sr3300t working well with this servo.Servo works graet, a bargan for the amount of torque compared to size and weight. Only problem is when i opened the servo to add more greas, two of the screws on the wire side were loose. When i put them back in they just turned, no threads in the plastec. I put a drop of ca in each hole i hope it holds up. Im gona see if i can get a replacement servo top from hk.got 6 of them, all centering very well. They work with Futaba 6014 FS and with my Hitec Optima 7 receivers very well.
These are very strong servos for large scale models.Some are in my 3.6 m TWM PiperA very good servo,measured at 23.8 kg/cm at 6v, center's well. I would recommend this to any one who needs a strong servo