New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

BMS-862DMAXplusHS冠军数字伺服(MG)18.8公斤/ .15sec /54克

BMS-862DMAXplusHS冠军数字伺服(MG)18.8公斤/ .15sec /54克

Discontinued Product

Please continue searching for a similar product.
SKU:
862DMAX-HS
WANT FREE SHIPPING? Click here to find out more!
BMS-862DMAX + HS冠军高性能数字伺服(合金装备)18.8千克/ .15sec /54克
具有以下特点来;
曲线齿轮平稳
双滚珠轴承(SI-油)
3极电机具有低信号的强扭矩的影响和成功获得CE认证
橡胶件案例防水
重型伺服情况
散热片中间
通过数字信号设计,100%装配方PWS
自动措施中央毫秒
ALU 6061金属齿轮材料与光C95材料轻,足够强大
数字集成电路(SOP封装,12位传送数据)
MOS-FET驱动器(意气风发驾驶能推过7A功率)
重量:54克/1.84盎司
外形尺寸:40.5×20×37毫米/ 1.60“×0.78”×1.52“
扭矩4.8V:18.8公斤/平方厘米258盎司/英寸
扭矩6.0V:21.2公斤/平方厘米292盎司/英寸
速度4.8V:0.15秒/ 60°,在空载
速度6.0V:0.12秒/ 60°,在空载
  • SKU 862DMAX-HS
  • Brand Bluebird
  • 重量 138.0000
  • 长度 92.00
  • Packaging Width 34.00
  • 高度 66.00
  • 扭矩(公斤)(最少0.01公斤) 18.80
  • 速度(秒/ 60deg ) 0.15
  • A(毫米) 43.00
  • B(毫米) 41.00
  • C(毫米) 37.00
  • D(毫米) 20.00
  • E(毫米) 55.00
  • F(毫米) 28.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Love this servo ! very powerful !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this servo ! very powerful !

they are the best servos..i uesd for giant planes.yak 150cc aero works...beast 100cc.. and naw i take..8..servos for yak55 aero works 100cc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

they are the best servos..i uesd for giant planes.yak 150cc aero works...beast 100cc.. and naw i take..8..servos for yak55 aero works 100cc

This servo can't be beat by performance or price ! , i installed a lot of these servos on a three giant planes, ( Hangar 9 Beast-hangar 9 sukhoi 3.1m-aeroworks 150cc yak) so far they works great. Fast, and centering well.



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo can't be beat by performance or price ! , i installed a lot of these servos on a three giant planes, ( Hangar 9 Beast-hangar 9 sukhoi 3.1m-aeroworks 150cc yak) so far they works great. Fast, and centering well.



this servo appear to be powerful !
made a test under 6 volt on giant gasser scale plane rudder standalone setup
here is a view on "the way it works in this video
http://www.hobbyking.com/hobbyking/store/HK_movies2.asp?idmovie=9c3be06791594b6aaa305890890853d7
good centering, low noise

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this servo appear to be powerful !
made a test under 6 volt on giant gasser scale plane rudder standalone setup
here is a view on "the way it works in this video
http://www.hobbyking.com/hobbyking/store/HK_movies2.asp?idmovie=9c3be06791594b6aaa305890890853d7
good centering, low noise

Petite video du fonctionnement de ce servo sur une drive d'avion classe 50 cc essence, vitesse et prcision sont bien prsentes durant ce test ralis sous 6 volts, TX/RX futaba 2.4
Go see this video about the way this servo works on a 50cc gasser's rudder withpush pull wire, a real high efficiency giants scale's servo
http://www.hobbyking.com/hobbyking/store/HK_movies2.asp?idmovie=9c3be06791594b6aaa305890890853d7

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Petite video du fonctionnement de ce servo sur une drive d'avion classe 50 cc essence, vitesse et prcision sont bien prsentes durant ce test ralis sous 6 volts, TX/RX futaba 2.4
Go see this video about the way this servo works on a 50cc gasser's rudder withpush pull wire, a real high efficiency giants scale's servo
http://www.hobbyking.com/hobbyking/store/HK_movies2.asp?idmovie=9c3be06791594b6aaa305890890853d7

Here is a fast and strong servo that seems to promise a good functioning see here below the link to the video from the test i made on this servo the push pull wire is not even correctly tightened and the middle position is already very good, no noise and no delay for centering, please watch this video
http://www.hobbyking.com/hobbyking/store/HK_movies.asp?idmovie=9c3be06791594b6aaa305890890853d7

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Here is a fast and strong servo that seems to promise a good functioning see here below the link to the video from the test i made on this servo the push pull wire is not even correctly tightened and the middle position is already very good, no noise and no delay for centering, please watch this video
http://www.hobbyking.com/hobbyking/store/HK_movies.asp?idmovie=9c3be06791594b6aaa305890890853d7

They are the best servos I ever had in my hands. The torque is already impressive on 4.8V, it will be even better with 6 V. Good value for money when you want to have something reliable on giant planes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

They are the best servos I ever had in my hands. The torque is already impressive on 4.8V, it will be even better with 6 V. Good value for money when you want to have something reliable on giant planes.

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save