这些640x480分辨率2.4 / 5.8GHz的双接收8路视频眼镜配备了一个真正的全彩色微型液晶面板和阻挡阳光，给用户丰富的80英寸虚拟显示屏幕完美的高端FPV飞行硅橡胶防护罩。
技术的TX或8〜13V输入这些眼镜都配备了双音频/视频接收模块，只需使用试剂盒提供合适的天线和2.4设置设定频率为5.8GHz的中的OSD（On Screen Display）菜单你将准备从FPV发射器接收视频。
1个640×480 8CH 2.4 / 5.8GHz的真彩色视频护目镜
The image quality is quite good, but my unit arrived with a defective video receiver as I cannot get more than about 70m. I get well over 1Km with my Boscam RC305 receiver using same antenna and vid Tx.Great goggles! Best ive ever used. There just truly amazing. 10/10 defiantly would recommend to everyone who is looking for FPV goggles!Great picture quality, nice thing to have two receivers (2.4 ghz and 5.8 ghz) in one place. I have a OrangeRx Open LRS 433mhz tx module and i use it with the 2.4 ghz video for a little bit more range, and then when i use the 2.4ghz FrSky tx module on the radio, I just swap the antenna and change the receiver to 5.8ghz on the menu. Just as simple. The only problem is head tracking drifting but that's present in almost all goggles, so in case you're not happy with the head tracker, you can build one yourself from a usb nano and a 9 axis IMU. google for it :)Hello All, I recently bought a set of these as a next step up from the Quanum DIY goggles, with a price that is very competitive and good online reviews I purchased a pair. Upon initial opening all looked good, smooth curved design and a nice silver finish which will be good at reflecting the sun compared to the black fatsharks which tend to get hot as they absorb more of the suns heat.
First problem was the fit on my face, I though I had an average face with no odd shapes but these goggles really cut into my nose. I had to completely cut the rubber out around the nose area and replace it with foam from an old ski mask. Also the sides of the goggles let in light and I had to place some thin adhesive foam behind the rubber at the edges to make it move inwards and form around mu eyes.
Secondly the strap supplied is far to thin, and with a battery attached to the side it slips down the back of my head constantly moving the goggles around my face, I again had to replace it with the much thicker strap from the set of ski goggles.
Finally the good points, once I had sorted all of the above the I went for a fly with my ZMR250 mini quad using a Boscam 200mW TX and a 1/3 700TVL CCD camera. The picture is amazing, with no blurring around the edges just a crisp image as described. Its like being in the cinema, right in the centre row looking at the wide screen, its a very immersive febest fpv goggles ever head tracking with 3d gimbal is beautiful flawless working with frsky taranis.