注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

BSR赛车M.RAGE 1/10 4WD M-机箱(UN组装套件)

BSR赛车M.RAGE 1/10 4WD M-机箱(UN组装套件)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 120.97
Rating:
Stock:
重量:
1750
SKU:
9562000095-0

Price War

esc
battery
servo
motor
acc
产品介绍

BSR赛车M.RAGE 1/10 4WD M-底盘(UN组装套件)210毫米长,几乎接触地面,只有刚性和柔性的权利平衡和身体,肯定让你重温你的男孩赛车天,当每路在你的铃木雨燕,福特护送或迷你Cooper自己的个人赛道(取决于你出生的时候)和一个很好的平衡车的快感比全力以赴速度更重要。那些日子,你会花几个小时在建设车库你的小自豪和喜悦的1/24日规模的翻版。

该M.Rage不仅是第一个真正在公路上赛车套件由锤的BSR赛车品牌推出,但是,我们终于出来了的东西,我们的车的客户一直在不断地问我们...... 构建它自己的套件 ,所以您可以享受将您的车生活,一直到其画整齐的小铃木雨燕身上的经验。

如果你是一名赛车手或严重锤你一定会喜欢艰难的碳纤维底盘,碳纤维增强塑料的摆臂和变速箱,球的diff前部和后部,​​如丝般光滑的铝冲击和一系列的选项部分甚至保持最竞争力的车手高兴。

由于这款车是如此之小,重量轻,灵活的,你并不需要一个超高速无刷系统有乐趣,实际上我们设置了一个老同学27T有刷电机的视频拍摄,它是足够的能力更鞭围绕一个公路上轨道。

这是一个真正的赛车只是在一个更小的封装比正常。所以,重温建立自己的模型,并与热的舱口盖撕毁街道的太平日子,并从BSR让自己的M.Rage。

特征:
•与田宫M尺寸车身和车轮完全兼容
•纤维结构底盘
•全新设计的后臂安装
•转向铁路系统
•使用全尺寸1/10在道路上的电子
•带球差异轴传动4WD。
•可调铝震荡
•全面的备件和零部件的选项列表支持
•包括明确的Lexan体,轮辋和轮胎

眼镜:
履带宽度:165毫米
轴距:210毫米
轮胎宽度:24毫米
车轮直径:56毫米
六角尺寸:12毫米
内部比:2.35:1

需要:
2CH无线电系统
2S 7.4V电池Lipoly(标准包/矮个子包)
标准尺寸的伺服
退出
发动机
充电器
栋工具

Product
Specifications

额外信息

  • 商品编号:
    9562000095-0
  • Brand:
    Basher
  • 重量(g)
    1750.00
  • 长度
    410.00
  • 宽:
    150.00
  • 高度:
    260.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Ptit kit très sympa on en a en pour son argent ...avec un 5000kv la voiture est très très performante mesuré à 84km/h avec le pignon d origine 31 en 48dp...le carbone et le plastique sont de très bonne facture (la visserie un peu moins) le montage se fait très bien ~5h se qui est très correct
les reglages d origine préconisés dans la notice sont étonnement très bons....de la voiture est franchement fiable
Quality
Value
Overall
Quality
Value
Overall
Von der Qualität her ein super M Chassis. Die Kugelpfannen sollte man allerdings gegen bessere tauschen da sie etwas viel Spiel haben und leicht mal abspringen. Etwas schwieriger abzustimmen als ein Tamiya M Chassis aber wesentlich schneller. Wenn man etwas googelt findet man auch Shops mit den Ersatzteilen.
Quality
Value
Overall
Quality
Value
Overall
Awesome car! not perfect tho, keep a keen eye on those diffs every few runs and when you first get the car unscrew the diff and apply generous locktite to the bolt. Check the shocks as well, sometimes they are leaky. This said, I've raced tamiya minis for years and this runs circles around them. Durable so far, it's been raced half a dozen times and ran in practice every oppurtuneity i get and other than links popping out no breakages... yet. I would still urge hk to carry more spares.

I was banned from racing it lately at 2 tracks so far but I am pushing to make it a class at my local one. So far a few guys have picked up kits and every time I run it people come look at it as it drives like a touring car and looks like a mini.

a great product and great value, would love to see hop ups like gear diff with aluminum or steel outdrives out back
Quality
Value
Overall
Quality
Value
Overall
this is one of the best kits/cars i have ever owned, drives beautifully, would be easy to use as a real race chassis. only issue was the servo saver wouldnt fit my hitec servo, i ended up using an old one from my hpi e10. definately recommend this to everyone.
Quality
Value
Overall
Quality
Value
Overall
Recived my kit yesterday missing hub carrier cant finished car come on hobbyking where is the QC ?
Quality
Value
Overall
Quality
Value
Overall
Great little car and certainly good quality for the price. Only negative is the poor parts support with some parts on backorder for more than 3 months. I had to buy a second car to get some spares which at the price is good value, but I won't be doing that again.
Quality
Value
Overall
Quality
Value
Overall
What an amazing value for money little car! We have started racing these at our indoor circuit with great results. Using the Trackstar 21.5T as a control motor. the racing is really close and only half a second or so slower than fully size tourers running 13.5T. So far I have only come across one weak spot and that is the diff. They are pre built but it does not seem to be with a proper ball diff grease and the thrust bearing is dry. A quick degrease and rebuild using a good quality ball diff grease solves the problem though, when reassembling the diff be sure not to overtighten as only 1 to 1 and a half turns is required after the initial grab, the half joints are only plastic and will fail if overtightened. Other than that the M.Rage is a great little package at a truly unbelievable price.
Quality
Value
Overall
Quality
Value
Overall
I have experienced on playing RC more than 35 years, it is really fun on assembling a 4WD mini car. The servo saver is bigger than usual. Apart from this, this car is full of ball-bearing. WOW!!! Such price with carbon fiber chassis, ... excellent!!!
Quality
Value
Overall
Quality
Value
Overall
The parts of this kit look and feel very nice, carbon chassis plates, alloy shocks, CVD-axles on all wheels. Pre-threading the screw holes with a 3mm tap makes the build much easier. Make sure you don't tighten the screws too much, especially the screws for the gear/diff covers, because that could cause some binding in the drive train (at least with my car that was the case). Most of the plastic parts feel like there is some fiber reinforcement (RFP-material), the suspension parts feel like normal plastic, which gives them some flex and make them less breakable in case of a collision.

Overall I think it is a very nice kit, with a very good value-for-money. It would be nice to have spare-parts in the EU Warehouse, as for now I can only order them from the International Warehouse.
Quality
Value
Overall
Quality
Value
Overall
Great car out of the box but unfortunately the plastics are a bit fragile. The screws tend to pull out of the steering hubs too easily and then you lose the top hat washers. Wouldn't be too much of a problem but Hobbyking don't seem to keep many spares, in fact none in the UK. Spares are available from the Global warehouse but the important parts and hop ups have been on back order for over a month now. Four people I know of have bought these and all have had the exact same problems. Good little car spoilt by lack of parts support on Hobbykings side.
Quality
Value
Overall
View all reviews
Upload
Videos
  • BSR Racing M.RAGE 1/10 4WD M-Chassis

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
servo
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。