注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

C2226微型无刷外转子1800kv(21克)

C2226微型无刷外转子1800kv(21克)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 15.50
Rating:
Stock:
重量:
52
SKU:
C2226/25

Price War

产品介绍

规格。
直径:22.2毫米
长度:28毫米
轴:3毫米
重量:21克(10厘米线)
功率:70W
KV:1800RPM / V
打开:25
阻力:657
空闲电流:.5A
最大安培:10A(15秒脉冲)
电压:2-4cell Lipoly


我们没有为这个小马达的建议道具的大小呢。
一旦我们拥有了数据,我们将其纳入此房源内。

Product
Specifications

额外信息

  • 商品编号:
    C2226/25
  • Brand:
  • 重量(g)
    52.00
  • 长度
    65.00
  • 宽:
    40.00
  • 高度:
    40.00
  • 千伏(转/ v)的
    1800.00
  • 最大电流( A)
    10.00
  • 功率(W):
    0.00
  • 长度B (毫米):
    20.00
  • 可以长深(mm )
    10.00
  • 最大电压(V)
    14.00
  • 轴(MM):
    2.00
  • Unit Weight (g):
    21
  • 直径C(毫米)
    22.00
  • 总长度E(毫米)
    35.00
  • 电阻( MH):
    657.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
love this motor use it on a 600mm wing with a 3s lipo, 6x4 apc prop, and a 10 amp turnigy esc little thing scoots run battery after battery no problems.
Quality
Value
Overall
Quality
Value
Overall
vorsicht- alles ein bischen d?nn und leicht gebaut. Bei dem Auswechseln der Welle aufpassen sonst bricht alles.
Quality
Value
Overall
Quality
Value
Overall
perfect motor all the way, I am using 4 of these motors and love them, they work flawlessly and are cheap! I think they are the best deal for this size motor
Quality
Value
Overall
Quality
Value
Overall
These motors may work ok and are quite strong...

but it is almost IMPOSSIBLE TO MOUNT THESE things like you want to. I've had to try 3D printing several different propeller and motor mounting methods to get these to fly my quadcopter. The shaft is TOO SHORT. grr... lots of time wasted just trying to mount these things.
Quality
Value
Overall
Quality
Value
Overall
put this motor on the outside of firewall on the HK mini stick arf. what a performer for such a little guy!! I have a 850mah 2S stuffed into the nose hatch (hence outside firewall mounting) and a plush 12A esc and a caseless 615rx directly in front of the elevator and rudder servos. this motor is super easy to install, just drilled 1.5mm holes and threaded screws then ca just like servo mounting. holds firm because its so little. using an apc 6x5.5 prop drawing 7.8 - 8.5 amps depending on battery. zips right along on this small model, and im sure would be great for anything in the 100-150g rtf weight range.
Quality
Value
Overall
Quality
Value
Overall
I use six of this motors for my shrediquette mm6 multiwii clone and they perform great. Using them with the turnigy plush 10a esc and gws 5x3 three-blade-props.

After a big crash one shaft is bend, but this does not affect the review, cause every motor would have been damaged in this crash.

Quality
Value
Overall
Quality
Value
Overall
Good fast motor! I works flawlessly! I put in the park airplane weighing 240 grams. Battery 2s500mah, Prop 8x6
Quality
Value
Overall
Quality
Value
Overall
strong motor, prop save doesnt hold prop too well, it wobbles off at hi speed.need to look for a smaller rubber o-ring. doesnt heat up a lot, running 3S 1250 mAh. 7x35 prop, zoom-zoom-zoom!
Quality
Value
Overall
Quality
Value
Overall
Used the wrong prop, stupid because the motor became a smoker.
Quality
Value
Overall
Quality
Value
Overall
Great Motor on 2S with 7x4 APC prop, pulls my 7.5 oz scratchy almost vertical. Only 3 stars as I fried the motor within 1 minute with a 3s with the same 7x4 prop. This is a great 2S motor but it can not even handle a 3s without a load on it. Do not use this motor with a 3s lipo or it will be FRIED!!!!!!!!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。