New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

相机万向倾斜安装的大黄蜂四轴飞行器框架

相机万向倾斜安装的大黄蜂四轴飞行器框架

Discontinued Product

Please continue searching for a similar product.
SKU:
9031000023
WANT FREE SHIPPING? Click here to find out more!

这台相机万向倾斜安装使得您的大黄蜂四轴飞行器令人惊叹的视频录制功能。它包括一个预安装的金属齿轮伺服微型它允许倾斜动作。

此坐骑是构建高品质的碳纤维,并配发,这使得卓越的视频质量的一种特殊的振动阻尼化合物的橡胶环。

眼镜:
最大宽度摄像头:120毫米
最大摄像头的高度:183毫米 (山中心测得)
重量:101

  • SKU 9031000023
  • Brand -
  • 容量(mAh) -
  • 重量 215.0000
  • 长度 180.00
  • Packaging Width 75.00
  • 高度 165.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It seems decent and does the job, though to take my Canon S100, which just fits, I had to swap out the servo, which couldn't handle the weight. I installed a Corona 939 metal-gear servo and now the gimbal works fine. I also attached two rubber bands between the sides of the gimbal and the legs of the quad (an Alien 560, also swapped out the attachment hooks for ones from Tarot). Without the rubber bands the gimbal frame jiggles around too much.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It seems decent and does the job, though to take my Canon S100, which just fits, I had to swap out the servo, which couldn't handle the weight. I installed a Corona 939 metal-gear servo and now the gimbal works fine. I also attached two rubber bands between the sides of the gimbal and the legs of the quad (an Alien 560, also swapped out the attachment hooks for ones from Tarot). Without the rubber bands the gimbal frame jiggles around too much.

This gimbal was specified under the acc part of the x650f so i assume this is compatible with the x650f so i immediately ordered 1, to my dismay when the package arrived, the hooks are far apart and are not designed to be used with x650f! wth hobbyking. why would you specify this on the acc tab of the x650f if it isnt designed for that frame!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This gimbal was specified under the acc part of the x650f so i assume this is compatible with the x650f so i immediately ordered 1, to my dismay when the package arrived, the hooks are far apart and are not designed to be used with x650f! wth hobbyking. why would you specify this on the acc tab of the x650f if it isnt designed for that frame!

Ho una Go-Pro3 e dopo averla montata sul mio Bamblebee ho avuto soddisfazione nel constatare che ci sono poche vibrazioni ed il filmato ottimo. Buon prodotto

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ho una Go-Pro3 e dopo averla montata sul mio Bamblebee ho avuto soddisfazione nel constatare che ci sono poche vibrazioni ed il filmato ottimo. Buon prodotto

I Love this gimble. It has isolated the waves in the HD footage and works a treat. If you watch the test video, you can see as you thrust forward, the camera stays level so you do not miss any footage. This is evident in the movie when the Habu jet is hand launched and the copter chases the jet as it picks up speed. Without the gimble, all you would see is grass as the copter tilts forward but it stays locked onto the subject (the jet ). I will be replacing the servo as it is a little jerky as can be seen at times in the vid. I have a JVC Everio camera mounted on the gimble lifted by a Dji F550 Hex. All up weight with a 5000 mah 4S is 2.6Kg. <http://www.youtube.com/watch?v=S7uM3PAfmkc>

Regards Keith

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I Love this gimble. It has isolated the waves in the HD footage and works a treat. If you watch the test video, you can see as you thrust forward, the camera stays level so you do not miss any footage. This is evident in the movie when the Habu jet is hand launched and the copter chases the jet as it picks up speed. Without the gimble, all you would see is grass as the copter tilts forward but it stays locked onto the subject (the jet ). I will be replacing the servo as it is a little jerky as can be seen at times in the vid. I have a JVC Everio camera mounted on the gimble lifted by a Dji F550 Hex. All up weight with a 5000 mah 4S is 2.6Kg. <http://www.youtube.com/watch?v=S7uM3PAfmkc>

Regards Keith

HI all

I have just unpacked this product and I have to say it is of the highest standard. I have done a lot of testing to isolate vibration waves from the footage of hexacopter filming and I have not found a gimble type mount, UNTIL NOW, that has addressed this issue. This mount has a two point isolation system. The first is the set of blue silecone isolators

at the mounting point and the second is a set of black isolators at the camera mount itself. This totally isolates vibration and is big enough to fit my JVC Everio HD video camera. I have seen many mounts this size for over $200 and they still have not addressed the vibration issues like this product has. The mount is also VERY LIGHT. Awesome product HK and thanks.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

HI all

I have just unpacked this product and I have to say it is of the highest standard. I have done a lot of testing to isolate vibration waves from the footage of hexacopter filming and I have not found a gimble type mount, UNTIL NOW, that has addressed this issue. This mount has a two point isolation system. The first is the set of blue silecone isolators

at the mounting point and the second is a set of black isolators at the camera mount itself. This totally isolates vibration and is big enough to fit my JVC Everio HD video camera. I have seen many mounts this size for over $200 and they still have not addressed the vibration issues like this product has. The mount is also VERY LIGHT. Awesome product HK and thanks.

A good product. The servo needs to be replaced as the rotation angle is less and it is very jittery!!! Use MG90S

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A good product. The servo needs to be replaced as the rotation angle is less and it is very jittery!!! Use MG90S

Great Camera mount for a GoPro unit comes 100pcnt ready to use out of the box. all you have to do is hookup the servo wire to a free channel and adjust your setting, I used a velcro strap to hold my GoPro in place here is the video

http://youtu.be/AOvArDjXzGE

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Camera mount for a GoPro unit comes 100pcnt ready to use out of the box. all you have to do is hookup the servo wire to a free channel and adjust your setting, I used a velcro strap to hold my GoPro in place here is the video

http://youtu.be/AOvArDjXzGE

Great for my gopro with the ys-x6 gimbal control

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great for my gopro with the ys-x6 gimbal control

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!