注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

碳纤维方管10×10毫米x 300毫米

碳纤维方管10×10毫米x 300毫米

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 4.01
Rating:
Stock:
重量:
23
SKU:
078000008-0

Price War

产品介绍

碳纤维方管10×10毫米x 300毫米

眼镜:
外形尺寸:10×10mm厚
内径:8毫米
长度为300mm
重量:19克

Product
Specifications

额外信息

  • 商品编号:
    078000008-0
  • Brand:
    N/A
  • 重量(g)
    23.00
  • 长度
    300.00
  • 宽:
    10.00
  • 高度:
    10.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bonne qualit? : rien ? redire.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These tubes rock! I will attest that they have very good quality! In response to drilling a hole in the previous review I would also recommend a high speed drill like a dremel to drill holes or for cutting. Really good quality stuff and for the price you cant beat them. I am using them for wing reinforcment to a fuselage aircraft. I would recommend a friend to buying any carbon fiber from HK so far it has been very good quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little lightweight tubes for multirotor arms. Id suggest gluing wood dowel segments inside locations that you drill through (before drilling), otherwise they will crack around your holes in crashes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
That square 10x10 mm tube seem very strong and nice made. I want to replace my 10x10 aluminium square tube i used for tri copter arms, that carbon seem very light. I don't want to try drilling to make holes but i bought an extra tube to test if i can drill it or just use epoxy as well. Anyway very cheep price for the value!
A funny thing about the package.. the box was really big.. and i bought #3 10x10 x 300 mm squarred carbon tube and #3 motor mounts. i think nobody would imagine what is inside :-) lol .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
DO NOT drill through as I did with my tricopter. The hole made the whole arm's end fall into separate hair thin fibers from with first hard landing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I needed a way to make a "channel" ion a wing of a sloper I'm reviving. This one did the trick! I can put a JR connector through it without any trouble. I have to shave the corners of the connector but it slides right thru now. And it is light weight and strong!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its a tube and its square and has a round hole :) it is real carbon rovings

Hint: put a 8mm wooden dovel inside where you plan to drive screw's thru it, will prevent it from cracking under the screw pressure ! Also seal the cut ends with thin cyano glue!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。