New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

案例设置MultiWii PRO飞行控制器和MTK GPS模块

案例设置MultiWii PRO飞行控制器和MTK GPS模块

Shipped From:
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 11.90
状态:
有货
SKU:
387000041-0
WANT FREE SHIPPING? Click here to find out more!

新的塑壳为MultiWii亲和MTK的GPS模块设置是为了保护您的FC和结束您安装一个伟大的方式。此案保留了完全访问3个串口,输入,输出,复位和USB端口。 GPS的情况下,配备了一个100mm的高大底座上,并配有安装硬件。

这是为了炫耀和保护您的MultiWii临的完美配件

眼镜:
重量:FC情况13g中GPS与基座外壳16g,
大小FC:14x52x72mm
尺寸GPS:15x53mm座杆百毫米

  • SKU 387000041-0
  • Brand Other
  • 容量(mAh) -
  • 重量 46.0000
  • 长度 140.00
  • Packaging Width 20.00
  • 高度 60.00
  • Multi Wii Pro Case Set

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

he new molded case set for the MultiWii pro and the MTK GPS module is a great way to protect your FC and finish off your install. The case retains full access to the 3 serial ports, inputs, outputs, reset and USB port. The GPS case comes with a 100mm tall pedestal mount and comes with mounting hardware.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

he new molded case set for the MultiWii pro and the MTK GPS module is a great way to protect your FC and finish off your install. The case retains full access to the 3 serial ports, inputs, outputs, reset and USB port. The GPS case comes with a 100mm tall pedestal mount and comes with mounting hardware.

As others have already mentioned, the case is great, but doesn't have holes cut out for all the possible pins. I wanted to use bluetooth, so I needed to do a bit of "plastic surgery" on the case. Also, the GPS puck is a good, clean install, but the MTK GPS board doesn't quite fit right. You have to run the wires very carefully and then push the two halves together fairly forcefully to join them; but in the end it does indeed work. I'm ordering my second one for my second unit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As others have already mentioned, the case is great, but doesn't have holes cut out for all the possible pins. I wanted to use bluetooth, so I needed to do a bit of "plastic surgery" on the case. Also, the GPS puck is a good, clean install, but the MTK GPS board doesn't quite fit right. You have to run the wires very carefully and then push the two halves together fairly forcefully to join them; but in the end it does indeed work. I'm ordering my second one for my second unit.

??? ??? ?? ??? ?? ????? ???? ????.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

??? ??? ?? ??? ?? ????? ???? ????.

The case for the multiwii fits good, just a few scratches on the case. The case of the GPS fits also well for the GPS-board, but you just need to dremel away a little part of the case to not crush the connector cables to the outside.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The case for the multiwii fits good, just a few scratches on the case. The case of the GPS fits also well for the GPS-board, but you just need to dremel away a little part of the case to not crush the connector cables to the outside.

Nice case. I soldered my bluetooth module directly to the board and took the cable through the hole of serial port 1 which is unused. So I had not to cut a new hole in the case.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice case. I soldered my bluetooth module directly to the board and took the cable through the hole of serial port 1 which is unused. So I had not to cut a new hole in the case.

Well this is a nice little casing for the MultiWii Pro. However, it is a pity a little more thought went into the design and made provision for all ports to be used. As it is, just the basics are catered for - and you need to cut your own slots for additional ports that can be used for the likes of the OLED and Bluetooth connections etc. The GPS sensor housing is rather quaintly named 'HolyBro Hobby'. A religious brother housing! hahah! The MTK module fits, but the woring from it has to be bent very tightly to exit the casing. Other than that, it really is worth every penny.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well this is a nice little casing for the MultiWii Pro. However, it is a pity a little more thought went into the design and made provision for all ports to be used. As it is, just the basics are catered for - and you need to cut your own slots for additional ports that can be used for the likes of the OLED and Bluetooth connections etc. The GPS sensor housing is rather quaintly named 'HolyBro Hobby'. A religious brother housing! hahah! The MTK module fits, but the woring from it has to be bent very tightly to exit the casing. Other than that, it really is worth every penny.

Not all GPS modules will fit in the case, but this can just be fixed by using longer screws to tighten the GPS together.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not all GPS modules will fit in the case, but this can just be fixed by using longer screws to tighten the GPS together.

Reasonable case, but as others have mentioned the gps doesn't fit properly. I think the gps case was designed for a different gps. Also the plastic standoffs moulded into the case don't line up exactly with the holes in the multiwii pro board. There are no holes that go all the way through so you can't bolt this case to your frame, unlike the bare board. The supplied screws don't have enough thread to fully bite into the plastic, so it is really easy to strip them. I ended up drilling out the frame so I could run some bolts through the FC mounting holes, which then holds the case together as well. Better than nothing, but this is not a high quality component.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Reasonable case, but as others have mentioned the gps doesn't fit properly. I think the gps case was designed for a different gps. Also the plastic standoffs moulded into the case don't line up exactly with the holes in the multiwii pro board. There are no holes that go all the way through so you can't bolt this case to your frame, unlike the bare board. The supplied screws don't have enough thread to fully bite into the plastic, so it is really easy to strip them. I ended up drilling out the frame so I could run some bolts through the FC mounting holes, which then holds the case together as well. Better than nothing, but this is not a high quality component.

Worth every penny and a must have

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Worth every penny and a must have

Useless! I tried to dry fit everything in and realised that i needed to do some cutting and shaving to get the board and GPS to fit. COULDN'T BE BOTHERED - so it's in the box until i find time to butcher it! I did read the reviews before i bought, so knew what to expect :-p

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Useless! I tried to dry fit everything in and realised that i needed to do some cutting and shaving to get the board and GPS to fit. COULDN'T BE BOTHERED - so it's in the box until i find time to butcher it! I did read the reviews before i bought, so knew what to expect :-p

  1. 1
  2. 2

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!