New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

CC3D凌OpenPilot飞行控制董事会授权(水平销)

CC3D凌OpenPilot飞行控制董事会授权(水平销)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000593-0
WANT FREE SHIPPING? Click here to find out more!

该CC3D ATOM主板是运行OpenPilot固件的所有功能于一身的稳定硬件。
它可以飞从三,四,六角,Octocopters任何机身以及固定翼飞机和配置,并使用OpenPilot地面控制站(GCS)软件进行监控。

这个最新版本具有改进的陀螺仪,并采用了功能强大的OpenPilot架构和跨平台的地面控制站(GCS)。
从OpenPilot项目CopterControl引入新一代多用途飞机稳定平台和
已经从地上爬起来,以执行以下功能设计:

•多转子控制器自动水平,其中TriCopters,四轴飞行器和HexaCopters
•无副翼直升机控制器,支持自动水平 - 实验
•固定翼无人机控制 - 实验

港口的Flexi
创新的Flexi-端口提供任何I2C连接或第二个串行端口。的Flexi-端口使直升机的控制,以使用I2C和一个串行口或双串口的灵活性,可以根据您的连接需求。

卓越的用户体验
OpenPilot一直试图使与CC3D一样方便,尽可能无故障的经验。硬件是完整的;没有需要焊接。
附带的RC线束可让您连接任何标准PWM接收器,在出厂前都经过测试,并配备了引导程序已经闪现。
一个标准的微型USB连接线(不包括)是用来加载最新的固件和配置都为您独特的机身。

该项目OpenPilot是试图使开源更人性化。 OpenPilot软件的设计是由每个人都可以使用!所有主要的操作系统支持并提供安装软件包。 GPLv3的许可软件是所有自由不仅是欢迎你破解它,但我们鼓励吧!

传感器和组件:
•3轴陀螺仪阵列和3轴加速计:MPU-6000
•支持常见的RC输入:6个PWM通道,结合PPM,的Spektrum / JR DSM2,DSMJ,DSMX卫星,双叶S.Bus接收器。
•对多个接收器同时支持。
•接收机端口功能(可配置):6个PWM输入通道或组合PPM流,4个PWM输出通道
•主端口功能(可配置):串行遥测(默认),GPS,S.Bus,的Spektrum / JR卫星
•端口的Flexi(配置):串行遥测,GPS,的Spektrum / JR卫星,或I2C外设(开发中)
•相机稳定:最多3轴相机支架与稳定和手动控制任何配置的接收机支持。
•板载易于配置的USB连接。
•USB和串行遥测和配置
•受强大OpenPilot GCS
•基于3C四元数过滤器运行在500Hz的

特征:
•强大的STM32 32位微控制器运行在具有128KB闪存和20KB RAM 90MIPs。
•3轴高性能微机电系统陀螺仪和3轴高性能的MEMS加速度计。
•微小的4层PCB的卓越的电气降噪和飞行性能。
•用于Windows,Mac和Linux软件支持。
•直接高速USB支持,无需驱动程序,真正做到了即插即用设备。
的Spektrum•卫星接收机的支持。
•双叶S-BUS的硬件支持。
•创新的Flexi-端口技术优越的端口灵活性。
•4Mbits板上EEPROM配置存储。
•10 PWM输出伺服系统,胚胎干细胞或相机稳定

眼镜:
尺寸:43×20×15毫米
重量:13.5克(包括潜在客户)

包括:
1个OpenPilot凌CopterControl局
1个OpenPilot串行电缆
1个OpenPilot CopterControl RC遥控接收器

****注:HobbyKing ATOM CC3D板由OpenPilot充分授权,并使用有图表和优质进口零件建成,不像其他可用的那些使用设计布局失踪地反馈问题电容的翻领洁具。销售每个单元的一部分被捐赠回OpenPilot项目。

OpenPilot软件的设计是由每个人都可以使用!所有主要的操作系统支持并提供安装软件包。该软件是根据GPLv3的许可证所有的自由软件,并不仅是欢迎你破解它,但我们鼓励它! www.Openpilot.org

  • SKU 9171000593-0
  • Brand -
  • 容量(mAh) -
  • 重量 19.0000
  • 长度 100.00
  • Packaging Width 20.00
  • 高度 90.00
  • CC3D OpenPilot fixed wing Stabilisation

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I get this CC3D but I've seen that two pin for output are soldered together. I've opened the box and repaired the pin. Quality is exactly the same for other cc3d (china clone).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I get this CC3D but I've seen that two pin for output are soldered together. I've opened the box and repaired the pin. Quality is exactly the same for other cc3d (china clone).

nice size for any 200mm & smaller quad, easy to set up evn for a biggener

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice size for any 200mm & smaller quad, easy to set up evn for a biggener

Mine was great, for about two weeks, then it died. I also bought a vertical pin one from the AU warehouse and it was dead on arrival. These don't appear to be good quality at all, no better in my experience than the cheap bong good ones. Thank goodness I still had my KK board for a fallback. I'll try naze32 now and see if they're any better. At least they can't be worse. My experience with this product says stay away.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine was great, for about two weeks, then it died. I also bought a vertical pin one from the AU warehouse and it was dead on arrival. These don't appear to be good quality at all, no better in my experience than the cheap bong good ones. Thank goodness I still had my KK board for a fallback. I'll try naze32 now and see if they're any better. At least they can't be worse. My experience with this product says stay away.

works great - for my HK450 FBL DFC - LIKE

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great - for my HK450 FBL DFC - LIKE

works great and very compact, runs on openpilot or librepilot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great and very compact, runs on openpilot or librepilot.

.this is small so that good to racing drone

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

.this is small so that good to racing drone

Also have a problem using this with sbus on a Taranis/x4r tx/rx. Tried a x6r and x8r - not working. While connected by usb and then applying power sbus is working 100pcnt, but when only connecting a lipo the cc3d don`t initialize. If you remove the signal from rx and power up it initialize and then you can replace signal and sbus will work. Another cc3d going to the dustbin

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Also have a problem using this with sbus on a Taranis/x4r tx/rx. Tried a x6r and x8r - not working. While connected by usb and then applying power sbus is working 100pcnt, but when only connecting a lipo the cc3d don`t initialize. If you remove the signal from rx and power up it initialize and then you can replace signal and sbus will work. Another cc3d going to the dustbin

cette carte de vol marche vraiment tres bien.dommage que le logiciel openpilot ais quelque soucis en ce moment.cependant on peut la flasher avec d'autre firmware.vraiment content de cette carte qui offre une tres bonne stabilisation.dans openpilot vous pouvez trouver une configuration deja definie pour le zmr 250 qui peut deja depanner les debutants qui ne connaissent pas exactement les reglages de pid.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cette carte de vol marche vraiment tres bien.dommage que le logiciel openpilot ais quelque soucis en ce moment.cependant on peut la flasher avec d'autre firmware.vraiment content de cette carte qui offre une tres bonne stabilisation.dans openpilot vous pouvez trouver une configuration deja definie pour le zmr 250 qui peut deja depanner les debutants qui ne connaissent pas exactement les reglages de pid.

I changed my CC3D Openpilot vertical pinned full sized model (36x36mm) for this one. The horizontal pins make it much easier to install in tight places. It functions just like its the CC3d just in a lot tighter package. This is an HK licensed version of the OpenPilot.org Atom. So far all the controlls and firmware updates have installed without a hitch. This little flight controller is about the size of a pack of juicy fruit gum.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I changed my CC3D Openpilot vertical pinned full sized model (36x36mm) for this one. The horizontal pins make it much easier to install in tight places. It functions just like its the CC3d just in a lot tighter package. This is an HK licensed version of the OpenPilot.org Atom. So far all the controlls and firmware updates have installed without a hitch. This little flight controller is about the size of a pack of juicy fruit gum.

ok recieved it, smaller then I thought, and thats good. still have to flight test it with my heli, 450 class. trex clone. going to use a HK dfc pro head, on a 450sev2 frame, had to mod frame for swash plate and drill 2 new holes. now just a new speed controller and some other parts and I let you all Know. :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ok recieved it, smaller then I thought, and thats good. still have to flight test it with my heli, 450 class. trex clone. going to use a HK dfc pro head, on a 450sev2 frame, had to mod frame for swash plate and drill 2 new holes. now just a new speed controller and some other parts and I let you all Know. :)

CC-3d_heli Wiring Download [74]
Heli_setup Download [3551]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save