New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

(已完成)边缘540黑色/银色1800毫米燃气26CC〜30毫升(ARF)

(已完成)边缘540黑色/银色1800毫米燃气26CC〜30毫升(ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
EDGE-540_28
WANT FREE SHIPPING? Click here to find out more!

边缘540是在红牛飞行系列赛最常用的飞机是一个优秀的特技飞机自90年代中期已经赢得了几个主要的无限特技飞行比赛中,与它的清洁和侵略性的线条,这也难怪它是如此流行的一种模式。

这种边缘540不仅外观惊艳,建设质量是太精彩了,一个轻而坚固的机身保证了精确的特技飞行能力和正确的发动机选择,无限的垂直性能。硬件是一流的质量和具有重载角和控制棒,拉/拉舵,伺服铅锁,伺服喇叭扩展等。主翼管和起落架是碳纤维和覆盖是一流的。

这是金钱3D气平面时,由30cc的汽油发动机或Turnigy ROTOMAX相当于无刷外转子供电,这将使惊人的表现惊人的价值,但它也是一个很好的规模特技飞行模式,这是由于它的低AUW可以通过供电一个26CC的发动机,仍然提供了极大的运动性能飞扬,无论哪种方式,这是最好的边缘的一个540车型在这个类可以买到!

眼镜:
翼展:1800毫米
长度:1680毫米
飞行重量:3800克

包括:
说明
所有硬件

要求:
你自己的6通道TX / RX
6×MG数字高扭矩伺服
30cc的汽油发动机(3D)〜26CC汽油发动机(体育)
75毫米微调
RX电池
UBEC /稳压器

  • SKU EDGE-540_28
  • Brand -
  • 容量(mAh) -
  • 重量 5950.0000
  • 长度 1310.00
  • 215.00
  • 高度 500.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Arrived yesterday. Seems well made with actual glue on the joints (unlike some ARTFs) and what appars to be a reasonably sturdy landing gear platform. Time will tell on that one as the strip I fly from is bumpy.

The model itself is covered ok, but you'll need to run the covering iron over it in a few places to get the wrinkles out. Comes with a nice, stiff carbon landing gear and a carbon wing tube that is an excellent fit. The manual is on a mini-CD and is about as much use as any other Chinglish manual. It instructs you to use a joiner rod (supplied) for the elevators and a single servo but then supply the fittings for twin servos. Since the hole is present in the iarframe for them I've used twin servos as it's always my preference for safety/redundancy. Stickers are an absolute b*****d, and pretty poor quality, but the overall effect is good once they're applied. Four stars only because of this. If you're wondering what the two star shaped bits of wood in the pictures are, they are mounting templates for a DLE30 and an MLD28 motor. This model is VERY lightly build aft of the wings, which will make it good for 3D but I'll be adding some reinforcement and weight to it as I prefer scale.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived yesterday. Seems well made with actual glue on the joints (unlike some ARTFs) and what appars to be a reasonably sturdy landing gear platform. Time will tell on that one as the strip I fly from is bumpy.

The model itself is covered ok, but you'll need to run the covering iron over it in a few places to get the wrinkles out. Comes with a nice, stiff carbon landing gear and a carbon wing tube that is an excellent fit. The manual is on a mini-CD and is about as much use as any other Chinglish manual. It instructs you to use a joiner rod (supplied) for the elevators and a single servo but then supply the fittings for twin servos. Since the hole is present in the iarframe for them I've used twin servos as it's always my preference for safety/redundancy. Stickers are an absolute b*****d, and pretty poor quality, but the overall effect is good once they're applied. Four stars only because of this. If you're wondering what the two star shaped bits of wood in the pictures are, they are mounting templates for a DLE30 and an MLD28 motor. This model is VERY lightly build aft of the wings, which will make it good for 3D but I'll be adding some reinforcement and weight to it as I prefer scale.

Arrived in good shaped doubble box. The covering is nice but needs some ironing. The hardware is a bit heavy in my opinnion but strong enough for any use. The manual comes on a small format CD, pretty simple but no need at all. Assembling is easy, no questions. Wooden parts are extremely nice, no need to modify at all. -1 crown due to unreal AUW.

Kit weights
fuselage with canopy 820g
horizontal stab 140g
rudder 60g
carbon spar connector 50g
wings 740g
carbon landing gear 100g
wheel pants 70g
glass fiber motor cover 170g
metal parts 220g
wheels 50g
tank 60g

2500g

doing the math...
6 servos 250g
onboard power, receiver 250g

motor 1200g
fuel...

3800g auw is kinda impossible with 30cc.


...planning electric conversion here, 500g Hacker A50 with 9 cells 3300mah Lipo, chain is about 1500g. AUW 4500g.

...to be continued

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived in good shaped doubble box. The covering is nice but needs some ironing. The hardware is a bit heavy in my opinnion but strong enough for any use. The manual comes on a small format CD, pretty simple but no need at all. Assembling is easy, no questions. Wooden parts are extremely nice, no need to modify at all. -1 crown due to unreal AUW.

Kit weights
fuselage with canopy 820g
horizontal stab 140g
rudder 60g
carbon spar connector 50g
wings 740g
carbon landing gear 100g
wheel pants 70g
glass fiber motor cover 170g
metal parts 220g
wheels 50g
tank 60g

2500g

doing the math...
6 servos 250g
onboard power, receiver 250g

motor 1200g
fuel...

3800g auw is kinda impossible with 30cc.


...planning electric conversion here, 500g Hacker A50 with 9 cells 3300mah Lipo, chain is about 1500g. AUW 4500g.

...to be continued

Final report - Love this plane, flys slow and precise. CG is about 138mm back which when inverted still flys level. Landing this plane is a dream; but must run a 20 x 8 prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Final report - Love this plane, flys slow and precise. CG is about 138mm back which when inverted still flys level. Landing this plane is a dream; but must run a 20 x 8 prop.

Back again to let those who want to know how it flew. I had CG point at 145mm and it seemed to fly OK untill i went inverted. When inverted it just wanted to climb, meaning that my tail is still heavy. Will come forward another 5mm. Plane flys very forgiving and light feeling; combined with plenty of power it does what its asked.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Back again to let those who want to know how it flew. I had CG point at 145mm and it seemed to fly OK untill i went inverted. When inverted it just wanted to climb, meaning that my tail is still heavy. Will come forward another 5mm. Plane flys very forgiving and light feeling; combined with plenty of power it does what its asked.

Have built the plane and have had its maiden; still in one piece. I went electric using 299kv Hyperion on 8s 4000mha. I used two servo's for the elevator and located rudder servo up in the fuselage. I had CG 5mm further back to the recommended and it flew "VerY" tail heavy. Have put my CG point now 10mm forward from recommended now (140mm back from leading wing edge) and yet to try. As they say better nose heavy better than tail heavy; I'm lucky that get to have a second go. I think that because the plane just floated so easy and responded so well i had success to land it in one piece. Really looking forward to flying it when i have CG right.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have built the plane and have had its maiden; still in one piece. I went electric using 299kv Hyperion on 8s 4000mha. I used two servo's for the elevator and located rudder servo up in the fuselage. I had CG 5mm further back to the recommended and it flew "VerY" tail heavy. Have put my CG point now 10mm forward from recommended now (140mm back from leading wing edge) and yet to try. As they say better nose heavy better than tail heavy; I'm lucky that get to have a second go. I think that because the plane just floated so easy and responded so well i had success to land it in one piece. Really looking forward to flying it when i have CG right.

All in the box looks good BUT this is my first large gasser plane and there are no instructions. Would HK be kind enough to put an instruction file in the files tab. Then after i get to build the plane & test it would i give a better review. Also I have been buying from HK for over two years and they are seriously slipping on delivery; especially when you pay for express postage. Sydney to Cairns - 13 days. HK have got great products and people will always buy; put a bit of extra effort in delivery.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All in the box looks good BUT this is my first large gasser plane and there are no instructions. Would HK be kind enough to put an instruction file in the files tab. Then after i get to build the plane & test it would i give a better review. Also I have been buying from HK for over two years and they are seriously slipping on delivery; especially when you pay for express postage. Sydney to Cairns - 13 days. HK have got great products and people will always buy; put a bit of extra effort in delivery.

manual Download [3719]
Edge540_RedBull_Manual Download [3719]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!