注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA
  • Global

科罗纳919MG数码金属齿轮舵机1.7千克/ 0.06sec /12克

科罗纳919MG数码金属齿轮舵机1.7千克/ 0.06sec /12克

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 8.60
Rating:
Stock:
重量:
35
SKU:
DS919MG

Price War

acc
产品介绍
科罗纳919MG金属齿轮伺服1.7公斤/ 0.06sec /12.5克

规格。
型号:DS919MG
工作电压:4.8V / 6.0V
工作电流:小于200mA /240毫安
运行速度:0.07sec.60º/0.06sec.60º
失速扭矩:1.5kg.cm /1.7kg.cm
尺寸:22.5X11.5X24.6mm(0.88“x0.45”x0.96“)
重量:12.5克
死区:≤3uSec
工作行程:40º/单面脉冲旅游400us
电位器:2滑块/直接驱动
滚珠轴承:MR85
装备: 金属
连接线:215毫米
工作温度范围:-20J + 60J
Product
Specifications

额外信息

  • 商品编号:
    DS919MG
  • Brand:
    Corona
  • 重量(g)
    35.00
  • 长度
    63.00
  • 宽:
    30.00
  • 高度:
    45.00
  • 速度(秒/ 60deg )
    0.06
  • 扭矩(公斤)(最少0.01公斤)
    1.70
  • Unit Weight (g):
    12.5
  • A(毫米):
    31.00
  • B(毫米)
    23.00
  • C(毫米)
    29.00
  • D(毫米):
    12.00
  • E(毫米):
    32.00
  • F(毫米)
    20.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect Servo for faster small aircraft. Good centering, high precision and reliable. Recommended product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I found the servo to constantly chatter without any load and the dead zone in middle setting was large enough to cause about a 4mm movement in my elevator.
I cant think of any purpose for this servo sorry.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
one of the best servo´s i know.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little servo for 3D plane. fast reaction and not at all twitchy. they find centre great and are nice and strong on big control surfaces. I'll be putting 2 more in my plane to complete the plane with all these servos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Doing exactly what they should in my DH-88
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use these and other Corona digi BB MG servos in my slopers, especially my combat machines. Great value, very reliable and work as advertised. I give all my MG servos a lube job with Teflon based grease which makes then extra smooth and quit.

I read where people question that they're advertised as metal geared, but find one plastic gear present. The reason for that is that the teeth can get bent, jam the servo, overload the circuit and fry the servo. Hence the sacrificial plastic gear.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought one to use on my yaw mechanism for a scratch built tricopter. after the first crash, the servo lost all of its holding torque and made a horrible whining sound (worse than the usual servo whine) but was still usable so i continued flying it. A few crashes later and I could no longer move my yaw mechanism. Took it home, popped it open and found that I had stripped a gear. Did a little research and apparently there is a "sacrificial" plastic gear in amongst those metal one. VERY DISAPPOINTED.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased it by seeing the good previous comments. Finally I am a little bit disappointed about the play on the bearings. Two ordered and both impacted. I am using them on a jet of 75cm wing span and both elevons have almost 1mm freedom on each direction. Not very well for fitting a stabilizer...
Other characteristics sound good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfecto para mi helicoptero Mini Titan E325 SE, trabaja muy bien con flybarless Tarot ZYX. Es super rapido.

Muy recomendado.



Perfect for my helicopter Mini Titan E325 SE, works very well with flybarless Tarot ZYX. It is super fast.

Highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
un microservo digitale molto veloce
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Servo Comparison ActionCam Inline Gimbal

  • Servo Comparison ActionCam Inline Gimbal

  • Servo Comparison ActionCam Inline Gimbal

  • Servo Comparison ActionCam Inline Gimbal

  • Servo Comparison ActionCam Inline Gimbal

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。