New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

科罗纳929MG金属齿轮伺服2.2公斤/ 0.10sec /12.5克

科罗纳929MG金属齿轮伺服2.2公斤/ 0.10sec /12.5克

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 8.06
状态:
有货
SKU:
CS929MG
WANT FREE SHIPPING? Click here to find out more!
科罗纳929MG金属齿轮伺服2.2公斤/ 0.10sec /12.5克

型号:CS929MG
工作电压:4.8V / 6.0V
工作电流:小于200mA /240毫安
运行速度:0.12sec.60º/0.10sec.60º
失速扭矩:2.0kg.cm /2.2kg.cm
尺寸:22.5X11.5X24.6mm(0.88“x0.45”x0.96“)
重量:12.5克
死区:≤3uSec
工作行程:40º/单面脉冲旅游400us
电位器:2滑块/直接驱动
滚珠轴承:MR85
装备: 金属
连接线:215毫米
工作温度范围:-20J + 60J
  • SKU CS929MG
  • Brand Corona
  • 重量 33.0000
  • 长度 64.00
  • Packaging Width 30.00
  • 高度 45.00
  • 扭矩(公斤)(最少0.01公斤) 2.20
  • 速度(秒/ 60deg ) 0.10
  • A(毫米) 31.00
  • B(毫米) 23.00
  • C(毫米) 29.00
  • D(毫米) 12.00
  • E(毫米) 32.00
  • F(毫米) 21.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Seems like a legit servo and ok price.

Negative is that it has a play in the servo arm when in neutral position. Not much but you can notice it when try to move it by hand.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Seems like a legit servo and ok price.

Negative is that it has a play in the servo arm when in neutral position. Not much but you can notice it when try to move it by hand.

great servos , I have used in all my gliders from 2mtr to 4mtrs wingspan with great success.highly recommend them

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great servos , I have used in all my gliders from 2mtr to 4mtrs wingspan with great success.highly recommend them

Really good quality servo's. They are a bit noisy but they always work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good quality servo's. They are a bit noisy but they always work.

Used to replace a damaged standard fit aileron servo in my Phoenix 2000. I replaced both rather than have odd ones. Quicker and a little noiser than the original.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used to replace a damaged standard fit aileron servo in my Phoenix 2000. I replaced both rather than have odd ones. Quicker and a little noiser than the original.

Good quality, works great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, works great.

After a hobbyking own brand only lasted 30 or so flights, i've converted to many Corona servos. They seem very well built, fast, strong and silent. Not worth skimping if you cherish something but these are well worth it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After a hobbyking own brand only lasted 30 or so flights, i've converted to many Corona servos. They seem very well built, fast, strong and silent. Not worth skimping if you cherish something but these are well worth it!

Superb servo, using it in daves tricopter, DJI tricopter and boat. No jiitter, fast, very useful!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Superb servo, using it in daves tricopter, DJI tricopter and boat. No jiitter, fast, very useful!

I put 4 of these servos in a 48" S-bach hybrid EPP foan and balsa plane. Never crashed, flown less than 10 times. I had to pull the elevator servo due to a stripped balsa wood hole. No big deal right? Well I decided to pull it all the way out to CA glue both holes to ensure a solid tight fit. Almost all of the ears were BROKEN off! I thought maybe something happened and it was my fault. Well then I pull ALL of the servos out. EVERY single one had broken ears on the case!! I can understand maybe one but 4?! The other 3 were all still solidly mounted when I removed them too. If I flew again, something would finished breaking and caused a crash which Hobby King would replace. I am done with these servos. I went to the other big tower site to replace them. I think I will stick to batteries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put 4 of these servos in a 48" S-bach hybrid EPP foan and balsa plane. Never crashed, flown less than 10 times. I had to pull the elevator servo due to a stripped balsa wood hole. No big deal right? Well I decided to pull it all the way out to CA glue both holes to ensure a solid tight fit. Almost all of the ears were BROKEN off! I thought maybe something happened and it was my fault. Well then I pull ALL of the servos out. EVERY single one had broken ears on the case!! I can understand maybe one but 4?! The other 3 were all still solidly mounted when I removed them too. If I flew again, something would finished breaking and caused a crash which Hobby King would replace. I am done with these servos. I went to the other big tower site to replace them. I think I will stick to batteries.

MY experiance with this corona servos is, that they are more precise than other ( far cheaper ) ones of same size. The few bucks more seem to be a very good investment. Gear has low play and centering is perfect. Recommended product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

MY experiance with this corona servos is, that they are more precise than other ( far cheaper ) ones of same size. The few bucks more seem to be a very good investment. Gear has low play and centering is perfect. Recommended product.

Top billig servo. Funktioniert gut, steckt jedoch nicht starke schlge weg, wie bei einem absturz..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top billig servo. Funktioniert gut, steckt jedoch nicht starke schlge weg, wie bei einem absturz..

Original box Download [52]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save