注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

科罗纳DS238HV数码金属齿轮舵机4.6千克/ 0.13秒/22克

科罗纳DS238HV数码金属齿轮舵机4.6千克/ 0.13秒/22克

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 11.31
Rating:
Stock:
重量:
46
SKU:
014000001

Price War

产品介绍

科罗纳DS238HV数码金属齿轮舵机4.6公斤/ 0.13sec /22克

型号:DS238HV
工作电压:6.0V / 7.4V
工作电流:300毫安/400毫安
运行速度:0.14sec.60º/0.13sec.60º
失速扭矩:4kg.cm / 4.6kg.cm
尺寸:29X13X30mm
重量:22克
死区:≤3uSec
工作行程:40º/单面脉冲旅游400us
电位器:3滑块/直接驱动
滚珠轴承:MR106
装备: 金属
连接线为300mm
工作温度范围:-20℃+ 60℃

Product
Specifications

额外信息

  • 商品编号:
    014000001
  • Brand:
    Corona
  • 重量(g)
    46.00
  • 长度
    76.00
  • 宽:
    32.00
  • 高度:
    51.00
  • 速度(秒/ 60deg )
    0.13
  • 扭矩(公斤)(最少0.01公斤)
    4.60
  • Unit Weight (g):
  • A(毫米):
    35.00
  • B(毫米)
    29.00
  • C(毫米)
    31.00
  • D(毫米):
    13.00
  • E(毫米):
    40.00
  • F(毫米)
    19.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Incredible good servo for an incredible good prize! Highly recommended, I will buy more. Superfast shipping from the global shop to Europe included. Thanks HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very economic and usefull servo, as you see, its very cheap and you can use 7.4v high voltage.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this item it is grosly over rated it burned op on the frist use its rated at 4.6 kg.cm should be rated at 1 kg.cm
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very goog servo hard and fast

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's been the rudder servo in my Soling sail boat for 2 years now with a Life 2S battery. Absolutely perfect.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice servo, But there is quite some slop in all the servo arms on both of the 2 I bought, the screw for the drive shaft is about the worst quality I have ever seen. Head not centered very badly pressed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Performs as advertised. Very strong. Slight differences in size (all measurements are in mm # in () is diff from Product Config Table): A = 34.60 (-.4), B = 28.93 (-.07), C = 30.21 (-.79), D = 11.48 (-1.52), E = 39.75 (-.25), F = 19.99 (plus.99)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used this servo for a replacement in my 1/16 e revo, lots of power, found it to be a little bit on the slower side, but you can't beat the price for a metal gear servo anywhere, the fit is snug but will slide in if you undo the front battery vent cover first, also used a hk45 amp esc, and the hk donkey 380 (4200kv) motor, I could make this setup 3 times to one stock setup, thanks again hk!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
?????? ? ???????

:)

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received the first one. Good servo; strong and fast. Robust horns, but they do not fit very well (a bit sloppy; screw to be very well tightened). Comes with side mounts; it would be nice if these became separately available as they also fit on 929/939 series.

"Actual size" as mentioned on the box is not the actual size!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。