Orange Pi Plus 2 is an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image, as well as the Banana Pi Image. It uses the AllWinner H3 SoC, and has 2GB DDR3 SDRAM
With Orange Pi you can build a computer, a wireless server, games, music and sounds, HD video and pretty much anything else!
Orange Pi is for anyone who wants to start creating with technology. It's a simple, fun, useful tool that you can use to start taking control of the world around you.
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K
GPU: Mali400MP2 GPU @600MHz Supports OpenGL ES 2.0
Memory (SDRAM): 2GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max. 64GB) / MMC card slot up to 2T on 2.5SATA disk, 8GB EMMC Flash
Onboard Network: 10/100/1000M Ethernet RJ45
Onboard wifi: Realtek RTL8189ETV, IEEE 802.11 b/g/n
Video Input: A CSI input connector Camera: Supports 8-bit YUV422 CMOS sensor interface: Supports CCIR656 protocol for NTSC and PAL: Supports SM pixel camera sensor : Supports video capture solution up to 1080p@30fps
Video Outputs: Supports HDMI output with HDCP, Supports HDMI CEC, Supports HDMI 30 function, Integrated CVBS, Supports simultaneous output of HDMI and CVBS
Audio Output: 3.5 mm Jack and HDMI
Power Source: DC input can supply power, but USB OTG input WILL NOT supply power
USB 2.0 Ports: Four USB 2.0 HOST, one USB 2.0 OTG
Buttons: Power Button(SW4), Recovery Button(SW3), Uboot Button(SW2)
Low-level peripherals: 40 Pins Header,compatible with Raspberry Pi B+
GPIO(1x3) pin: UART, ground.
LED: Power LED & Status LED
Key: IR input, POWER
Supported OS: Android Ubuntu, Debian, Rasberry Pi Image
Dimensions: 108x 67mm