注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

阴暗面四ARC 200

阴暗面四ARC 200

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 33.13
Rating:
Stock:
重量:
111
SKU:
9107000437-0

Price War

产品介绍
9107000437-0
Product
Specifications

额外信息

  • 商品编号:
    9107000437-0
  • Brand:
  • 重量(g)
    111.00
  • 长度
    125.00
  • 宽:
    19.00
  • 高度:
    105.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Comes in a tiny box, parts look nicely made and there are two bolt options for the FC.
It's a bit challenging to fit FPV transmitter and receiver antennas so I made a top plate for it from some thin black anodised aluminium, that takes any heat from the FPV tx and allowed me to mount 5.8 and 2.4GH antennas. Obviously adding more to the frame gets away from it's naked light design but many users could probably sacrifice a few grams for robust and easy build. I like the design for the engineering simplicity but do feel there should be a separate "simple" top plate option that will mount the FPV TX with antenna vertically behind the FC.
Great frame for those who want to go super simple and can work out how to mount stuff.
Quality
Value
Overall
Quality
Value
Overall
Just finished my build on this yesterday. No fpv gear on it, just the basic flight package.
I used a Matek PDB and a Naze32 rev 5 controller with DYS 20A ESCs and DYS 2205 2300Kv racing motors. The trick with these small frames is to direct solder everything. The frame comes with 4 extra long screws and some fiberglass washers for mounting the PDB on the bottom of the stack (use the washers to make sure the PDB does not contact the carbon fibre frame). Next, use the short spacers to mount the controller and then the taller ones to complete the stack and add the "X" to the top of the frame. I originally used an OrangeRx satellite for my Rx but had a problem with it and swapped it out for a CPPM Rx.
As far as the camera mount goes, there are holes in the frame that line up with my Foxeer mount but the top of the second plate gets in the way. As I'm typing this I've just realized that what I thought was the bottom place is probably the upper plate and switching them will solve that problem (doh!). Anyway, very satisfied with the quality of this frame. It does take a little ingenuity to make everything fit but the results seem worthwhile.
Quality
Value
Overall
Upload
Videos
  • Darkside Quadcopter Frames - HobbyKing Daily

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。