New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

省道250 FPV随着配电,清洁和肮脏和LED照明

省道250 FPV随着配电,清洁和肮脏和LED照明

Shipped From:
  • USA
QTY:

Now save 保存 AU$ 60.82 AU$ 60.82

Special Price AU$ 19.35 AU$ 19.35

You save 保存 AU$ 60.82 AU$ 60.82

Was  AU$ 80.17

状态:
有货
SKU:
415000006-0
WANT FREE SHIPPING? Click here to find out more!

FUN-RC引入了飞镖250小型H四路,与相匹配的市场上迷你,但保留了乐趣价格标签的功能包装。

从乐-RC的飞镖...系列包一些伟大的功能,设计,耐​​用性,伟大的外观,但不会打破银行。该框架配有干净和肮脏的隔振系统,旨在让相机和飞行控制器漂亮的平稳。振动顶针有让他们附着在崩溃时硬件。达特也有一个内置在挂载ESC的,也有直接安装的XT60 / T-连接器配电系统,集成LED方向前灯和辅助输出的A / V和FC!该帧通过帧路由线路,使得最干净的这一个安装了一个Mini可以拥有数控切割通道。它们包括抛光和阳极氧化架的硬件,甚至是电机安装硬件。马达的武器是一个很好的仡5mm厚的碰撞无损伤,但光做所有正确的地方。镖也有FPV和高清摄像头的安装方式,安装在前面,从道具看法了。

如果你比较达特到竞争的唯一觉得不足的是价格标签。

特征:
•清洁和污垢隔振系统崩溃锁
•内置电源连接器支架和LED射灯配电
•抛光和阳极氧化处理的硬件
•一个干净的电线布线通道安装
•5mm厚电机武器

眼镜:
轴距:250毫米
重量:135克
包装尺寸:22.5 * 6 * 3.5(CM)

需要:
电机:1806至2208年KV2000〜2300
螺旋桨:5X3
飞行控制:30-45mm安装距离
电池:3S 1300-1800ma
5通道无线电

*注:硬件不显示图片包含

  • SKU 415000006-0
  • Brand -
  • 容量(mAh) -
  • 重量 180.0000
  • 长度 220.00
  • 30.00
  • 高度 60.00
  • Dart 250 400 FPV Quad Frame

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

OK here is the deal i got 3 of these when they came on sale for less then the full price and i still think i paid too much. The arms can not stand up to much of a crash and the frame will break as well in not much of a crash. The only thing this would be good for is simple fpv of someone who already knows how to fly and wont crash. No FPV racing here guys it just wont stand up to it. The frame is light and power distribution is good but the screws are 2mm or something and have a shallow hex hole so tightening them down can be a pain. This is not the drone you are looking for guys HK has much better options for the same or less.
PS lost fpv on first real flight came down on soft grass hard but not anything crazy and broke 3 arms.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK here is the deal i got 3 of these when they came on sale for less then the full price and i still think i paid too much. The arms can not stand up to much of a crash and the frame will break as well in not much of a crash. The only thing this would be good for is simple fpv of someone who already knows how to fly and wont crash. No FPV racing here guys it just wont stand up to it. The frame is light and power distribution is good but the screws are 2mm or something and have a shallow hex hole so tightening them down can be a pain. This is not the drone you are looking for guys HK has much better options for the same or less.
PS lost fpv on first real flight came down on soft grass hard but not anything crazy and broke 3 arms.

cute and tiny quad, packaging is so small its like a watch case. thin arms I don't think they love crashes, lets see how long will it take to destroy this lol

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cute and tiny quad, packaging is so small its like a watch case. thin arms I don't think they love crashes, lets see how long will it take to destroy this lol

Really good design. Lower cage is stiff and robust, upper cage is more flimsy, but survived the crash which broke all 4 motor arms. Lots of space for FPV etc. Flies good with cc3d atom (version in protective case from HK)

Plastic screws were replaced with cable ties almost on day one.
For the price it is probably wise to buy second kit to be used as spares but people like to upgrade something they build with their own hands more than build another one :).
Will be great if upgrade parts will be available for the kit - CF plates, CF or aluminum motor arms etc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good design. Lower cage is stiff and robust, upper cage is more flimsy, but survived the crash which broke all 4 motor arms. Lots of space for FPV etc. Flies good with cc3d atom (version in protective case from HK)

Plastic screws were replaced with cable ties almost on day one.
For the price it is probably wise to buy second kit to be used as spares but people like to upgrade something they build with their own hands more than build another one :).
Will be great if upgrade parts will be available for the kit - CF plates, CF or aluminum motor arms etc.

Good little frame. Arrived with all needed screws. rigidity is very good once correctly assembled. Arms seem strange, a kind of solid plastic or resin. Obviously, it is the weak part of this Racer. let's see when I will get its new RX.

Anyway, the conception Clean/Dirty is very good, The whole FC platin on silent blocks helps a lot to improve smoothness. smart ! You can set up whatever you want or you need inside : FPV gear, Osd, GPS, Baro, Mag, Lipo alarm, ... nothing should be damaged in case of crash !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good little frame. Arrived with all needed screws. rigidity is very good once correctly assembled. Arms seem strange, a kind of solid plastic or resin. Obviously, it is the weak part of this Racer. let's see when I will get its new RX.

Anyway, the conception Clean/Dirty is very good, The whole FC platin on silent blocks helps a lot to improve smoothness. smart ! You can set up whatever you want or you need inside : FPV gear, Osd, GPS, Baro, Mag, Lipo alarm, ... nothing should be damaged in case of crash !

I am using this frame and I have crashed it several times. It is quite surprising that the main body can absorb some significant impact. One of those crashes was an intended roll flip which ended up as a half circle and plunged to the ground. The main frame survived, it's the arms that always breaks, most of the time you can just super glue it back together, that is if you are lucky enough not to shatter it into pieces and it's unfortunate that hobby king is currently out of stock for the replacement arms. but all in all, this frame is a lot of fun...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using this frame and I have crashed it several times. It is quite surprising that the main body can absorb some significant impact. One of those crashes was an intended roll flip which ended up as a half circle and plunged to the ground. The main frame survived, it's the arms that always breaks, most of the time you can just super glue it back together, that is if you are lucky enough not to shatter it into pieces and it's unfortunate that hobby king is currently out of stock for the replacement arms. but all in all, this frame is a lot of fun...

I bought this as my first quad. I'm no "pro" by any stretch of the imagination, so I am still learning as I go. At first I was a bit hesitant because each of the black frame pieces seemed to be flimsy...although, once I got it built and everything tightened up, the frame is actually quite solid and rigid. I'll be eager to get the electronics installed and get flying. For the money....I'd say its a great frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this as my first quad. I'm no "pro" by any stretch of the imagination, so I am still learning as I go. At first I was a bit hesitant because each of the black frame pieces seemed to be flimsy...although, once I got it built and everything tightened up, the frame is actually quite solid and rigid. I'll be eager to get the electronics installed and get flying. For the money....I'd say its a great frame.

I use it with the Baby Beast V2 motors on 4S Turnigy Nanotech 1300mAh and HQ5045 Props, awesome!!!!! Use it for FPV flights

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it with the Baby Beast V2 motors on 4S Turnigy Nanotech 1300mAh and HQ5045 Props, awesome!!!!! Use it for FPV flights

Couldn't be happier with this frame. I love the dirty/clean section design. Frame went together without any problems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Couldn't be happier with this frame. I love the dirty/clean section design. Frame went together without any problems.

Quite the fine frame, I received this as a gift from the Mrs. Arms are sturdy in my opinion, the frame does need a bit of prep for the tabs, but overall, a breeze to put together. Solder points are at just the right distance for even the most ham fisted hands out there and I really like the LED light bar, although it's rather unnecessary. I don't mind the G10, you can strengthen by using thin CA on the edges and using additional nylon posts, I have dropped this frame the same way I was dropped as a child, like me, it survived even after bouncing off a hardwood floor. 5 stars from me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite the fine frame, I received this as a gift from the Mrs. Arms are sturdy in my opinion, the frame does need a bit of prep for the tabs, but overall, a breeze to put together. Solder points are at just the right distance for even the most ham fisted hands out there and I really like the LED light bar, although it's rather unnecessary. I don't mind the G10, you can strengthen by using thin CA on the edges and using additional nylon posts, I have dropped this frame the same way I was dropped as a child, like me, it survived even after bouncing off a hardwood floor. 5 stars from me.

This is a great frame. I don't think it can be beaten in terms of value for money. The build was simple and everything went together perfectly. It's a very well thought out design and has excellent flying characteristics. Admittedly, I haven't performed any significant crash testing, but so far everything is holding up well. Highly recommended!
My setup: Multistar Elite motors, Afro 12amp ESC's, Naze32 controller, 5x3 props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great frame. I don't think it can be beaten in terms of value for money. The build was simple and everything went together perfectly. It's a very well thought out design and has excellent flying characteristics. Admittedly, I haven't performed any significant crash testing, but so far everything is holding up well. Highly recommended!
My setup: Multistar Elite motors, Afro 12amp ESC's, Naze32 controller, 5x3 props.

  1. 1
  2. 2
No File Name Download [932]
Dart250 manual p1-2 Download [1996]
Dart250 manual p3-4 Download [2287]
No File Name Download [413]
Finished build Download [692]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save