New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

省道400 FPV四直升机随着配电,清洁和肮脏和LED照明

省道400 FPV四直升机随着配电,清洁和肮脏和LED照明

Discontinued Product

Please continue searching for a similar product.
SKU:
415000010-0
WANT FREE SHIPPING? Click here to find out more!

FUN-RC引入了飞镖400 FPVħ四,与相匹配的市场上迷你,但保留了乐趣价格标签的功能包装。

从乐-RC的飞镖...系列包一些伟大的功能,设计,耐​​用性,伟大的外观,但不会打破银行。该框架配有干净和肮脏的隔振系统,旨在让相机和飞行控制器漂亮的平稳。振动顶针有让他们附着在崩溃时硬件。达特也有一个内置在挂载ESC的,也有直接安装的XT60 / T-连接器配电系统,集成LED方向前灯和辅助输出的A / V和FC!该帧通过帧路由线路,使得最干净的这一个安装了一个Mini可以拥有数控切割通道。它们包括抛光和阳极氧化架的硬件,甚至是电机安装硬件。马达的武器是一个很好的仡5mm厚的碰撞无损伤,但光做所有正确的地方。镖也有FPV和高清摄像头的安装方式,安装在前面,从道具看法了。

如果你比较达特到竞争的唯一觉得不足的是价格标签。

特征:
•清洁和污垢隔振系统崩溃锁
•内置电源连接器支架和LED射灯配电
•抛光和阳极氧化处理的硬件
•一个干净的电线布线通道安装
•5mm厚电机武器

眼镜:
轴距:400毫米
重量:310克

需要:
电机:2212〜2216
螺旋桨:8X5
飞行控制:30-45mm安装距离
电池:3S 2100-3200ma
5通道无线电

*注:硬件不显示图片包含

  • SKU 415000010-0
  • Brand -
  • 容量(mAh) -
  • 重量 450.0000
  • 长度 370.00
  • 35.00
  • 高度 90.00
  • Dart 250 400 FPV Quad Frame

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

awesome platform, make sure when using 4s lipos to use a voltage regulator on the leds. 5 min modification required to the pdb tracer between the power and the led.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awesome platform, make sure when using 4s lipos to use a voltage regulator on the leds. 5 min modification required to the pdb tracer between the power and the led.

I built this frame. In the fitst minute the pcb has burned. I didn't understand. Everything was good. I think the pcb was shorted.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I built this frame. In the fitst minute the pcb has burned. I didn't understand. Everything was good. I think the pcb was shorted.

Just finished my build of the Dart 400 frame. Pretty happy with the quality of the kit, everything fits together nicely and looks well made. At first the kit felt on the heavy side but after finishing the build the total weight was 1200g including a 3300mah 4s and Gopro. Im using the 980kv Sunnysky motors with 8x5inch props on 4s. 30amp ESC and APM flight controller with GPS. To balance everything out i put the batter under the frame and my electronics in the middle and GPS up top. hovers at around 40pcnt stick. I have added a picture to the files section.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just finished my build of the Dart 400 frame. Pretty happy with the quality of the kit, everything fits together nicely and looks well made. At first the kit felt on the heavy side but after finishing the build the total weight was 1200g including a 3300mah 4s and Gopro. Im using the 980kv Sunnysky motors with 8x5inch props on 4s. 30amp ESC and APM flight controller with GPS. To balance everything out i put the batter under the frame and my electronics in the middle and GPS up top. hovers at around 40pcnt stick. I have added a picture to the files section.

The arms delaminated where they meet the motor and broke on a rough landing (not a crash) . Really disappointed with that! Otherwise the quality is good. Finally HK has some spare parts but i want new LONGER arms that arent crap!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The arms delaminated where they meet the motor and broke on a rough landing (not a crash) . Really disappointed with that! Otherwise the quality is good. Finally HK has some spare parts but i want new LONGER arms that arent crap!!!!

Light weight, goes together easily, I had two screws that had a messed up allen, but it came with enough extra's I didnt need them, flies great, cant wait to put more time on it! Wish there was an option for longer arms, but I did fit 9" props on mine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Light weight, goes together easily, I had two screws that had a messed up allen, but it came with enough extra's I didnt need them, flies great, cant wait to put more time on it! Wish there was an option for longer arms, but I did fit 9" props on mine.

Very good for the price. A bit on the heavy side, however the integrated PCB is very good for making a neat looking quad. Definitely won't take anything larger than 8" props, so use 7" or 8" props with 1100-1200kv motors, and a 2800mah 3S for best use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good for the price. A bit on the heavy side, however the integrated PCB is very good for making a neat looking quad. Definitely won't take anything larger than 8" props, so use 7" or 8" props with 1100-1200kv motors, and a 2800mah 3S for best use.

I've now built this frame up with ESCs, motors and FC. I'm currently outfitting it with my FPV gear. There's a lot of good things to say about this frame. All parts fit great and are accurate and snug. There are no extra screws or hardware so dont lose any. Frame feels very solid and strong when put together but I wouldnt advise worm burning or wraping it around trees because it's not made for that and will definitly break. But it looks like it will be an excellent FPV/AP machine if cared for. For the money, this will do everything a QAV400 will do and save you a bundle. In case you dont know, this is a clone of the QAV. It even has the top cutout on fwd end for the Luminear gimbal. Haha. I love the rear battery connector and there's lots of room for FPV gear. The few things I dont care for are as follows:

1) The short arms. Limited to 8" props. This forced me to go 4S using my existing motors.

2) Fwd LED burns out in three minutes with a 4S battery (trust me I Know).

3) The CG is going to be tail heavy without a fwd gimble so this forces you to put main battery on the roof and move it forward (like a mini quad). Ive put all possible flight, FPV, and AP gear in the nose and she's still tail heavy with battery down below on rear deck. Oh well. It will simply look like my mini QAV250 which I love.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've now built this frame up with ESCs, motors and FC. I'm currently outfitting it with my FPV gear. There's a lot of good things to say about this frame. All parts fit great and are accurate and snug. There are no extra screws or hardware so dont lose any. Frame feels very solid and strong when put together but I wouldnt advise worm burning or wraping it around trees because it's not made for that and will definitly break. But it looks like it will be an excellent FPV/AP machine if cared for. For the money, this will do everything a QAV400 will do and save you a bundle. In case you dont know, this is a clone of the QAV. It even has the top cutout on fwd end for the Luminear gimbal. Haha. I love the rear battery connector and there's lots of room for FPV gear. The few things I dont care for are as follows:

1) The short arms. Limited to 8" props. This forced me to go 4S using my existing motors.

2) Fwd LED burns out in three minutes with a 4S battery (trust me I Know).

3) The CG is going to be tail heavy without a fwd gimble so this forces you to put main battery on the roof and move it forward (like a mini quad). Ive put all possible flight, FPV, and AP gear in the nose and she's still tail heavy with battery down below on rear deck. Oh well. It will simply look like my mini QAV250 which I love.

Finally HK is giving the competition a run for it's money! What a nice kit for such a budget conscious price. As soon as I saw it released I purchased one along with the Dart 250 and DHL delivered in 3 days. The frame is larger than I expected. All frame plates are 1.5mm minimum thickness, the arms are 5.0mm thick as advertised but one of the arms I got is only 4.90mm. I guess that's the trade off with these clones but i'm not complaining. I like the built in LED light in front and the Battery connector plug in at the rear. Built in PDB is also excellent. Motor mounts will accept 16x19mm bolt pattern so I ordered NTM2826 1200kv motors and a Turnigy Heavy Duty 3000mah 4S 60C lipo. I am going reuse my F20A esc's with simonK for this build. I can't wait to get this all together and fly it. Here's my unboxing review in youtube (copy and paste link) . . http://bit.ly/1tNzlDE

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finally HK is giving the competition a run for it's money! What a nice kit for such a budget conscious price. As soon as I saw it released I purchased one along with the Dart 250 and DHL delivered in 3 days. The frame is larger than I expected. All frame plates are 1.5mm minimum thickness, the arms are 5.0mm thick as advertised but one of the arms I got is only 4.90mm. I guess that's the trade off with these clones but i'm not complaining. I like the built in LED light in front and the Battery connector plug in at the rear. Built in PDB is also excellent. Motor mounts will accept 16x19mm bolt pattern so I ordered NTM2826 1200kv motors and a Turnigy Heavy Duty 3000mah 4S 60C lipo. I am going reuse my F20A esc's with simonK for this build. I can't wait to get this all together and fly it. Here's my unboxing review in youtube (copy and paste link) . . http://bit.ly/1tNzlDE

Battery size Download [137]
No File Name Download [1343]
No File Name Download [1343]
No File Name Download [58]
Dart400 Build Pic Download [3469]
My build Download [746]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save