New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

德尔塔火箭高速永 - 黑色640毫米(ARF)

德尔塔火箭高速永 - 黑色640毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
341000065-0
WANT FREE SHIPPING? Click here to find out more!

是一个伟大的飞机快速,有趣,和小你的想法?没有比三角洲火箭。这种三角翼飞机是所有建立轻和层级的机身几乎到达准备简单的飞行需要最后的组装和安装准备去电子产品。在印刷塑料薄膜覆盖,在醒目的方案很容易东方在空气中,在这样一个快速的飞机一些重要的东西。

组装德尔塔火箭只需要几个小时的事。的升降副翼来预铰接,只是削减在覆盖对于垂直鳍插槽中,代替胶它们和机身组装完成。下分片作为起落橇和帮助防止跑道皮疹机身的腹部。对于功率,三角洲火箭行之有效一个3S动力系统与至少150瓦。通过磁性安全树冠快速访问电池。德尔塔火箭的小型和紧凑的特性使得它理想作为它留在车上飞机,准备​​好,可以在片刻的通知飞行。

特征:
•几乎箭在弦上 - 完成最后的组装和安装电子
•重量轻,简单的轻木和胶合板机身
•覆盖在预印薄膜多色
•磁性安全的电池舱
•接受电力系统150〜200瓦特
•两个可用的颜色版本
•更低的分片保护着陆螺旋桨

眼镜:
跨度:640毫米
长度:440毫米

要求:
3+通道发射机和接收机
150〜200瓦电源系统
2x17g舵机
3S 11.1V 1500〜1800mAh的电池LiPoly

  • SKU 341000065-0
  • Brand -
  • 容量(mAh) -
  • 重量 1586.0000
  • 长度 680.00
  • 115.00
  • 高度 390.00
  • Delta Rocket Speed Wing

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This little flying wing is great here is some building tips i found useful. I haven't flown it yet so i will give a flying review after i fly it however i am confident things will go well! Go with the instructions all the way real simple, one thing you might want to do is strengthen up the motor mount although its pushing so the force is forward. it depends on the size of the motor you choose. Next, there is no air flow to keep things coll so at back end of cowl you see a half circle at that location on the fuselage cut a hole as large as you can to match thee half circle that's on the canopy this hole will be bigger then the small holes back at motor mounting...dont worry how small they are because the large hole in front with small hols in back will cause a suction...now make sure that the plastic canopy that is already installed check the front and there should be a gap right in the bottom front, just a bad line up However it makes for a great air entree from there to the hole you made right across the battery and ESC and RX and out the back! Use a wooden dowel jig to place the fins at the right degree, 200 between the two fins and i found that 24 mm from fin to edge of wing keeps everything in proportion. the bottom skids needs to be timed because look inside and you will see part of the frame in the way. I used a 350 watt hobby king 2600kv motor so it needed a 55 amp ESC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little flying wing is great here is some building tips i found useful. I haven't flown it yet so i will give a flying review after i fly it however i am confident things will go well! Go with the instructions all the way real simple, one thing you might want to do is strengthen up the motor mount although its pushing so the force is forward. it depends on the size of the motor you choose. Next, there is no air flow to keep things coll so at back end of cowl you see a half circle at that location on the fuselage cut a hole as large as you can to match thee half circle that's on the canopy this hole will be bigger then the small holes back at motor mounting...dont worry how small they are because the large hole in front with small hols in back will cause a suction...now make sure that the plastic canopy that is already installed check the front and there should be a gap right in the bottom front, just a bad line up However it makes for a great air entree from there to the hole you made right across the battery and ESC and RX and out the back! Use a wooden dowel jig to place the fins at the right degree, 200 between the two fins and i found that 24 mm from fin to edge of wing keeps everything in proportion. the bottom skids needs to be timed because look inside and you will see part of the frame in the way. I used a 350 watt hobby king 2600kv motor so it needed a 55 amp ESC

Delta Rocket Inst Manual - EN Download [2906]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save