注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

DYS 1306-3100KV BX系列设置两个顺时针/逆时针电机

DYS 1306-3100KV BX系列设置两个顺时针/逆时针电机

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 26.13
Rating:
Stock:
重量:
56
SKU:
206000018-0

Price War

产品介绍

该DYS BX系列电机是质量,性能和价格的平衡。所有的BX电机配备集成一块数控电机外壳和轴道具为轻,坚固和紧凑的设计决策。在BX电机来包装成一组2个电机,一是顺时针旋转与相匹配的道具坚果1逆时针旋转的。还包括与设定为2mm子弹连接器和配套的安装硬件。该1306-3100kv多转子电机是理想的小型180〜220毫米多轴飞行器和4〜5英寸的道具。

眼镜:
RPM / V:3100kv
外形尺寸:18×15mm的
:2毫米主轴和5mm支撑杆
电压:2S〜3S(7.4V至11.1V)
重量:13克
最大电流:8A
ESC:6安培到10安培
电机安装孔:M2×12毫米

包括:
2电机1 CW / CCW 1
2道具坚果
子弹conectors 2毫米
安装硬件

Product
Specifications

额外信息

  • 商品编号:
    206000018-0
  • Brand:
    N/A
  • 重量(g)
    56.00
  • 长度
    80.00
  • 宽:
    40.00
  • 高度:
    50.00
  • 千伏(转/ v)的
    3100.00
  • 最大电流( A)
    8.00
  • 功率(W):
  • 长度B (毫米):
    15.00
  • 可以长深(mm )
    6.00
  • 最大电压(V)
    12.00
  • 轴(MM):
    5.00
  • Unit Weight (g):
    13
  • 直径C(毫米)
    18.00
  • 总长度E(毫米)
    26.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
compact and hight power for 180 size
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Decent fairly cheap motors for use with smaller quadcopters. Using on 130mm frame currently.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
worked fine for me. the the threads on the shaft designate direction of rotation so mount them accordingly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used these on a 180mm quad at 3S with AfroESC 12A ultra light /w BEC. Used 4x4.5 Bullnose and GemFan 4045 ABS. I suppose I lucked out, no issues so far after 10-15 batteries. After a longer session, one motor becomes slightly warm but thats it. The CW/CCW threading is slightly confusing at first, but fine thereafter, and Ive used a Sharpie permanent marker to indicate the direction on the CW (grey) nuts to help. I use a 10mm socket to assist in removing the prop nuts / spinners when theyve tightened themselves too much after a prop break. The leads were easy to tin and solder. The included M2x6mm screws worked with my Diatone ET 180, although I filled them down slightly shorter for peace of mind as they we too close to the motor stator windows (you can see them just under the bell looking at the side profile). Remember to use a thread-locker, as the screws can loosen themselves quickly. Ive purchases backup motors, but have not as yet need them. They do seem slightly unbalanced, and certainly dont sound smooth, but for the novel size and nominal price are fine for my needs.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
actually this motors is a trash.very bad bearings.very unbalanced.don't waste your money on this trash
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
They have a really nice power but from the 4 motors I bought one gets extreamly hot on my quadrocopter while the others stay cool. Looks like it is defect.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very bad mor , got 4 sets of this and 4 comes out defective. motos are not balanced and making some grinding noise.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was really hoping these would be good, sadly my experience has been poor with them.
The first set of 4 I purchased for a 155 frame. One of the motors did not spin true out of the box, it caused some vibration but I didn't want to spend the time to RMA so I used it anyway. This same motor would often not want to start but would spin up after a few tries. Less than one month later I had a fairly tame crash in grass and ended up bending the inner shaft and and prop shaft, very surprised that a impact with grass would do so much damage.
I ordered 2 replacement motors and had another crash the same day as I installed them, resulting in another bent shaft. Even after straightening the shaft the motor no longer runs as I believe the magnets have shifted.
Overall you get what you pay for, and the durability of these has left me looking for something else.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought six of these motors. One went up in smoke during takeoff on the first flight. The motor actually did spin up normally, then it stopped suddenly and sparks came out of the case. Now the windings are totally fried and another $10 are wasted!
I'm absolutely certain there was nothing wrong with my setup. I used the suggested multistar 10a esc v2, a 3s lipo and 4 inch props.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have these on a HK Thorax Mini Hex. It is rippingly fast and gives 10-12 min on a 2200 Zippy Compact. They are small and fragile...
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • DYS BX Series Motor Set

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。