New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

DYS BE1806-2300kv无刷电机多转子3S〜4S

DYS BE1806-2300kv无刷电机多转子3S〜4S

Discontinued Product

Please continue searching for a similar product.
重量:
40
SKU:
206000012-0
WANT FREE SHIPPING? Click here to find out more!

该DYS BE1806-13多转子电机,非常适合中小型多轴飞行器,并配有安装螺栓,一个道具适配器,采用2mm子弹连接器150毫米电源线。

眼镜:
转/ V:2300kv
外形尺寸:23×21毫米
:2毫米
电压:3 S〜4S(11.1V至14.8V)
重量:24克
功率:89W
最大电流:8A
ESC:10安培到12安培
建议道具:5X3(3S 11.1V)〜6X2(2S 7.4V)
电机安装孔:M2×12毫米/16毫米

  • SKU 206000012-0
  • Brand DYS
  • 重量(g) 40.00
  • 长度 45.00
  • 30.00
  • 高度 40.00
  • 千伏(转/ v)的 2300.00
  • 最大电流( A) 8.00
  • 电阻( MH) 0.00
  • 最大电压(V) 11.00
  • 功率(W) 89.00
  • 轴(MM) 2.00
  • 长度B (毫米) 18.00
  • 直径C(毫米) 21.00
  • 可以长深(mm ) 8.00
  • 总长度E(毫米) 21.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

bought a x6 package of these coupled with 20a ESCs and 6" props.
all came fairly balanced out of the box, after some testing 2 of them died from over-heat.
please note that from my experience they can handle 4s & 4x3 (2/3 blades) props great,
4s & 5x4 or 3s & 6x4 props (2 blades) produce a lot of heat, apparently to the point they stop all together..
3s & 5x4 (3/4 blades) is acceptable but will produce a fair amount of heat.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought a x6 package of these coupled with 20a ESCs and 6" props.
all came fairly balanced out of the box, after some testing 2 of them died from over-heat.
please note that from my experience they can handle 4s & 4x3 (2/3 blades) props great,
4s & 5x4 or 3s & 6x4 props (2 blades) produce a lot of heat, apparently to the point they stop all together..
3s & 5x4 (3/4 blades) is acceptable but will produce a fair amount of heat.

Bought several of these DYS motors and now that I'm making time to do this review noticed they've droped another dollar or two. Great smooth running 1806 motors, motor-mounts. These motors are pretty resiliant too still spin freely after several rough crashes. (To clarify rough I means at minimum prop(s) broke)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought several of these DYS motors and now that I'm making time to do this review noticed they've droped another dollar or two. Great smooth running 1806 motors, motor-mounts. These motors are pretty resiliant too still spin freely after several rough crashes. (To clarify rough I means at minimum prop(s) broke)

Very nice little motor, lightweight but has the power needed.

Quality also seems very good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice little motor, lightweight but has the power needed.

Quality also seems very good.

Quality motors for 250 and lower if you are beginner and low on budget. It can give good thrust with 5' props. Have 8 of this motors and only one had issue with windings. Still i give it five stars for quality/price ratio.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality motors for 250 and lower if you are beginner and low on budget. It can give good thrust with 5' props. Have 8 of this motors and only one had issue with windings. Still i give it five stars for quality/price ratio.

very good price, no problems with this product

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good price, no problems with this product

Great little motor for the few flights I've had using them on a ZMR250 clone. Motor is, however, listed here as being 2S-4S capable, but max voltage is shown as 11.1V in the "product config" table. Which is correct ? Are replacement shafts going to be made available ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor for the few flights I've had using them on a ZMR250 clone. Motor is, however, listed here as being 2S-4S capable, but max voltage is shown as 11.1V in the "product config" table. Which is correct ? Are replacement shafts going to be made available ?

Very durable motors. Are extremely smooth and are pretty well built.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very durable motors. Are extremely smooth and are pretty well built.

Great little motor. Picked up a set for my 250 quad along with Afro 12 amp optos and 5030 props. Lots of power for the 250 with 3S 1400MAh battery. For this price I will buy more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor. Picked up a set for my 250 quad along with Afro 12 amp optos and 5030 props. Lots of power for the 250 with 3S 1400MAh battery. For this price I will buy more.

Bought these Motors for my First quadcopter build. I don't have much RC experience but I love these motors. I run 3s with 12a Afro ESC and with 5030 plastic props it can easily lift my 550g quadcopter with plenty of thrust for those emergency manoeuvres.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought these Motors for my First quadcopter build. I don't have much RC experience but I love these motors. I run 3s with 12a Afro ESC and with 5030 plastic props it can easily lift my 550g quadcopter with plenty of thrust for those emergency manoeuvres.

Used them for my ZMR 250 great Power for the price. And they dont break fast. Crashed very hard sometimes and everything is fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used them for my ZMR 250 great Power for the price. And they dont break fast. Crashed very hard sometimes and everything is fine.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Specifications DYS BE1806 Download [78]
Specifications DYS BE1806 Download [78]
Specifications DYS BE1806 Download [78]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save