New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

EDF涵道风扇单元7叶片3.5英寸/89毫米

EDF涵道风扇单元7叶片3.5英寸/89毫米

Shipped From:
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 29.73
状态:
有货
SKU:
OR003-00110-7B
WANT FREE SHIPPING? Click here to find out more!

EDF涵道风扇单元7叶片3.5英寸
锯片直径:3.5英寸/89毫米
外壳直径:96毫米
壁厚为2mm
EDF长度:86毫米
刀片类型:7
轴尺寸为5mm
此EDF将采取电机39毫米的最大直径


由高强度增强塑料。
可用的备用螺旋桨。

Recomended电机:36-70 5圈(14.8〜22.2V)
ESC:50A
:2,000kv
功率:1000〜2500克推力


  • SKU OR003-00110-7B
  • Brand -
  • 容量(mAh) -
  • 重量 183.0000
  • 长度 120.00
  • Packaging Width 100.00
  • 高度 120.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well like most folks say you have to balance this bad boy. I ran it up with my 1400kv Inrunner before balancing on 6 cells and it vibrated so much I couldn't put it past half throttle plus it moved the test bench across the floor paving stone and all.

Before I put this in the model I was getting 1278 watts and 54amps on 6s
I then got it installed and tested it in the model and got an additional 100 watts the amps went up to 58 too.

Jepe Fast foam Mirage 2000 weighs 5.5 pounds with glass so it should perform rightly. Haven't flown it just yet though so we shall see.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well like most folks say you have to balance this bad boy. I ran it up with my 1400kv Inrunner before balancing on 6 cells and it vibrated so much I couldn't put it past half throttle plus it moved the test bench across the floor paving stone and all.

Before I put this in the model I was getting 1278 watts and 54amps on 6s
I then got it installed and tested it in the model and got an additional 100 watts the amps went up to 58 too.

Jepe Fast foam Mirage 2000 weighs 5.5 pounds with glass so it should perform rightly. Haven't flown it just yet though so we shall see.

I ran it up today after checking fan for balance. Mine was OK out of the box. It certainly has some serious thrust on 5 cells and the HK 2850KV motor, it's not a toy like the 70mm units. Easy to fit motor too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ran it up today after checking fan for balance. Mine was OK out of the box. It certainly has some serious thrust on 5 cells and the HK 2850KV motor, it's not a toy like the 70mm units. Easy to fit motor too.

I use this fun with motor warhead 1850kv on 5s nanotech 4000mah esc k-force 100A on my homemade jet. the thrust is 2400 gr with intake ring! and consumes 86 Ampere. and also the sound is very good. exellent fun!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this fun with motor warhead 1850kv on 5s nanotech 4000mah esc k-force 100A on my homemade jet. the thrust is 2400 gr with intake ring! and consumes 86 Ampere. and also the sound is very good. exellent fun!!

Very powerful ,unit @ low price .And with rite motor you can get almost 4kg of thrust ,WOW Thanks Hauye .The blade is balance , if vip check the shift and hole in blade for a perfect setting ,thats all you need.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerful ,unit @ low price .And with rite motor you can get almost 4kg of thrust ,WOW Thanks Hauye .The blade is balance , if vip check the shift and hole in blade for a perfect setting ,thats all you need.

if you well balanced the fan reinforce the motor mount and add a intake lip like I did from a extra one that I had from a midi fan with a arc motor 36/75/1680 kv you will get around 2400 watts and below 110 amps on 6s 5000 mah 35/50 c

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

if you well balanced the fan reinforce the motor mount and add a intake lip like I did from a extra one that I had from a midi fan with a arc motor 36/75/1680 kv you will get around 2400 watts and below 110 amps on 6s 5000 mah 35/50 c

great edf but fist find the motor it well take

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great edf but fist find the motor it well take

It runs very well after balancing. Great thrust! It has also a very nice sound (almost like a real turbine at high rpm).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It runs very well after balancing. Great thrust! It has also a very nice sound (almost like a real turbine at high rpm).

Keep an eye on the balance when you mount it !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Keep an eye on the balance when you mount it !!!

Upon balancing, I found that the hole that is bored through the center of the fan was drilled at a slight angle. The hole is centered correctly in the rear of the hub but slightly off-center in the front. Needless to say this made balancing a bit more interesting.



Materials and moldings seem to be of good quality.



The price makes the extra effort worthwhile if you are on a budget.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Upon balancing, I found that the hole that is bored through the center of the fan was drilled at a slight angle. The hole is centered correctly in the rear of the hub but slightly off-center in the front. Needless to say this made balancing a bit more interesting.



Materials and moldings seem to be of good quality.



The price makes the extra effort worthwhile if you are on a budget.

Using this EDF with a Novak HV-Pro 5.5 system. Didn't mount it yet but was able to pull 44A peak (measured with the Turnigy wattmeter) with 4s lipo...and that wasn't at full throttle since it's scary when you're just holding it. This is the only 5mm shaft EDF that I could find on HobbyKing, but I'm glad I bought it. It's a shame that the max diameter is 39mm when the Mamba Monster series is 40mm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this EDF with a Novak HV-Pro 5.5 system. Didn't mount it yet but was able to pull 44A peak (measured with the Turnigy wattmeter) with 4s lipo...and that wasn't at full throttle since it's scary when you're just holding it. This is the only 5mm shaft EDF that I could find on HobbyKing, but I'm glad I bought it. It's a shame that the max diameter is 39mm when the Mamba Monster series is 40mm.

  1. 1
  2. 2
  3. 3
  4. 4

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!