注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

EDF64与ADH300电机组装252W(4300kv)

EDF64与ADH300电机组装252W(4300kv)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 24.99
Rating:
Stock:
重量:
197
SKU:
EDF64-ADH300

Price War

产品介绍

EDF64与ADH300电机装配252W
本机具有ADH300电机,生产更多的权力,但吸引更多的电流。
如果你的飞机可以采取更大的电池(2200mAh的+),那么ADH300电机将是一个合适的选择。

规格。
测试电压:11.1〜14.5V(3-4S)
测试电流:16A
推力:540克
功率:252W
电机:ADH300L

Product
Specifications

额外信息

  • 商品编号:
    EDF64-ADH300
  • Brand:
  • 重量(g)
    197.00
  • 长度
    115.00
  • 宽:
    75.00
  • 高度:
    80.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Quite a powerful fan with the new motor that is now in this unit, but it does draw nearly 30 Amps so use an esc that will handle that amount of current. the stated 16 Amp is obviously from the previous model. I will be using two of these for an F22 Depron sheet model so it should have a pretty good turn of speed, Maybe two motors is overkill. I can always throttle back a bit!
Quality
Value
Overall
Quality
Value
Overall
in just one word ... wow ! it is light , it is powerfull , and it fits very well under an old F/ 15 airplane as spare components , The old boy is back in the air , thanks to this engine :))
Quality
Value
Overall
Quality
Value
Overall
tento vyrobok je obzvlast vybornej kvality a som s nim nadmieru spokojeny,a urcite by som ho doporucil aj ostatnym zaujemcom o kupu tohto vyrobku.
Quality
Value
Overall
Quality
Value
Overall
Purchased 2 of these edf systems.

test resolts from HK are 16A

Thrust: 540g

Power: 252W at 11.1v-14.5v

Thats wrong



I tested with 7.4v 1000mah got 14a 141w.

Also tested with 11.1v 1300mah got 30.68a 318.4 watt

Tested with 14.8v 1000mah got 30.62a 407 watt.

Tested with 11.1v 2200mah got 31.69a 365 watts can anny one conferm.

Quality
Value
Overall
Quality
Value
Overall
I am flying with this EDF in a X-83 flyjet. 2200mah Turnigy 40c battery, Turnigy 9X Tx and Rx, 40amp Sentry ESC and x2 HXT900 servos. Like all other EDF's their is no air flowing over the control surfaces until you have a proper take off speed. There is no lack of power and will keep on climbing at 70deg angle not vertical but hey by the time it slows down when you do go vertical you have to come down any way and when it does, its coming down screaming lol. You may watch my video in the video tab Flyjet X-83 video tab, its the only video on it Theunsie
Quality
Value
Overall
Quality
Value
Overall
. 10,6V 30,57Ap (. ) 328,3Wp (. ), 25A 260W. . 40A, . 2200mAh 20C. 3.
Quality
Value
Overall
Quality
Value
Overall
Surprisingly powerful!! did a quick scratch build of a Star Wars Pod Racer and was zooming all over the house with it!!! Can't wait to put it into something that can fly...
Quality
Value
Overall
Quality
Value
Overall
Just installed the motor/edf combo. The wires out of the motor are really small compared to all other jet motors that I have had. I was worried that it wouldn't get enough power. I installed it and ran it with a 3S-30C-2150 Rhino battery and a 40 amp switching 3 amp bec. It ran VERY powerfully to my surprise. I think it would have flown straight up out of my hands in the middle of my living room if I hadn't been holding it tightly. I haven't flown it yet but I think it will have plenty of power to fly.

Russ
Quality
Value
Overall
Quality
Value
Overall
Got my EDF two weeks ago and fitted on a DIY foamie. A good EDF for the price. However, the motor heats up with a 3S battery just after 30-40 seconds of flight. Thrust is around 450 grams with a 3S battery. The unit is well balanced and for the price given, its a good bargain.
Quality
Value
Overall
Quality
Value
Overall
this EDF unit delivers a nice and powerful thrust, it will fly very nicely any 64mm size foamy, just use a good quality ESC and a good Battery(turnigy nano tech) and you'll be amazed.







test bench it and here are the results: 3S: 12.20V, 13.1A, 160W aprox. 370g thrust aprox. 3.00 g/W aprox.

Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。