这个微小的军刀是惊人的，EPO泡沫与它相结合的轻量级统计意味着这将是非常宽容的奇低于100％登陆。 35mm的风扇单元与ESC预装的是副翼和升降舵的，该机型标配1块让你有当它到达做的是连接控制杆，挂钩钢筋混凝土设备到使用微一Reciever Molex公司conectors，你准备好了......是啊，在当地的公园，篮球场与新的微F-86军刀格斗，其实相当不错的任何地方，与朋友们飞过这些模型是绝对叱！
ESC：6A W / BEC
7.4V 350MAH 2S Lipoly电池
Really cool small EDF but the build quality isn't what I was hoping for. First of all it's delivered with standard JR connectors, NOT molex as promised. The hinges for ailerons and elevators are very weak in their construction. 1 was completely loose upon delivery so I had to use glue and tape to re-attach 1 aileron before the first flight. The EDF is pretty fast for it's size but climb performance sucks, hard to get it out of the ground effect with full power (yes, I have configured ESC to make sure it's delivers full power). The product absolutely has potential and the price is really good but in the end it was just waste of money.This a fun small jet, for an awesome value! It doesn't have the micro connectors as said in the description, but a Lemon Rx will fit nicely! It only took 5 minutes to get the components together, and it was balanced without any extra weight! Great buy I recomend it!no room for recommended batteries or rx. even if you butcher it and fly without the canopy it's a squeeze to fit a 250mah battery. fan not centered. hatch very weak. servos weak. ad says it comes with micro molex connectors but it comes with jr servo connectors meaning you won't be flying anyway till you sort out that problem. bad experience thanks to misinformation, false advertising and incompetence from ShoddyKing.Good and Bad
Nice model Foam is good quality beware of edf hatch fragile.
Down side is servos Rudder servo DOA
EDF way off balance a bit cheap
Fair Priceplane shipped quick in about a week is the side for the bad the foam did not seem to be epo if so its very cheap epo foam also the listing states micro molex plugs plane came with full size servo plugs and even if you trim
the plane you can't fit a receiver even without the case on a 370mah battery in witch i had to trim to fit and get the correct cg got the plane in the air
it had no power elevator servo was not stong at all will swap motors and see what happensbekommt leider nur 4 Sterne den die Angaben zu dem Empfnger stimmen nicht.
Es wird ein normaler Empfnger und kein micro mit 1,25mm Stecker bentigt.
Und dann wird es sehr sehr eng im cockpit.Just cant fault this little plane, stock with a nano tec 2S 370,(have to do a little bit of trimming to get the 370 in, nothing seriouse). Good throw, keep it level for a second then just rip the sky up, axial rolls, level flight loops, and nice slow landings. I am using a ER9X with 70pcnt expo on the ailerons only, got it today and was flying inverted circuits on the first battery, whaddya want?Arrived yesterday, description said it needed micro receiver which I bought but it arrived with standard sized plugs on servos and ESC??? Had to cut out foam to fit a RX in. Also bought zippy 380ma but must have ordered the wrong sized ones as they are thin but large and don't fit. Flew it this morning without putting the canopy on just with rubber bands holding battery in. Fly's good, fast enough, good roll rates at speed, elevators don't have allot of authority but it looks great in the sky and can fly in small spaces. Great plane at less than half the cost of others I have bought of same size, this is my 4th HK plane and I'm finding it hard to get all the right parts first go. HK how about a list of standard parts for each plane on the buy page?Bought one & it will not bind to Spectrum Radio. Tried usual bind & no luck. Anyone else hae this problem?This little plane is great. A whole lot of fun for the price, Needs some extra weight added to the nose but otherwise flies great out of the box. Its not all that fast and at the end of the flight can just glide in to landing but has enough go to loop role and fly inverted.