New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

F9F-8美洲狮BOS W /缩回4S EPO(PNF)

F9F-8美洲狮BOS W /缩回4S EPO(PNF)

Discontinued Product

Please continue searching for a similar product.
重量:
3562
SKU:
F9F-8-PNP-BO
WANT FREE SHIPPING? Click here to find out more!

格鲁曼F9F美洲狮基本上是一个掠翼豹,其实早期生产的版本,比修改后的豹机身而已。新的后掠翼提出了黑豹的马赫数为0.79至0.86为熟女但飞机来得太晚了韩国和美洲狮被迅速转移了不太显眼的角色,有的甚至被转换成靶机。然而,所示的F9F-8版本是美洲狮的终极版,是一个纯粹的战斗机和大炮都和高达全副武装六飞弹对这一高超的比例模型,如图所示。

这个极具规模看EPO模型非常不熟女正义。该功能非常强大合金EDF单位为预装配和供应推力地段,性能是用大量的垂直4S精湛,这听起来很神奇。尼斯质量弹簧腿全金属收回预先安装你并连接到强大的伺服的。所有其他高扭矩伺服预安装,因为是完全可编程的ESC和UBEC这给4.8V或6V输出到RX的选项。

这是一种高质量比例模型就是有点比一般的插销N飞构建方面更为复杂,但对于RC飞行员奖励是70毫米班上最好的飞行泡沫的车型之一。

眼镜:
翼展:880毫米
长度:1000mm
飞行重量:1350克
EDF: 合金68毫米与2850880瓦特无刷内转3575kv(4S上的静推力- 1450克)
ESC:60A OPTO
UBEC:3A〜5A
伺服:8×9克高扭矩

包括:
所有硬件
说明
综合贴花表

要求:
你自己的5〜6通道TX / RX
3300mAh的4S〜4000mAh的4S Lipoly电池

  • SKU F9F-8-PNP-BO
  • Brand -
  • 容量(mAh) -
  • 重量(g) 3562.00
  • 长度 935.00
  • 255.00
  • 高度 420.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This jet flys very scale , fast , heavy, and has a little tail waggle in crosswinds. I am using zippy 4000 40C , stuffed all the way into the nose , using the factory C of G . I launch on a bungee cart with the gear retracted , to land I dive towards the field and drop the gear , then bleed out all the airspeed as I lower the EDF power , touch down on the rear gear and hold my flare until the nose drops. So far everything has worked perfectly. Note the elevator is really small (scale ) , so watch out it in turns where your airspeed is slow. never fly this bird below 60pcnt throttle , it needs speed!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This jet flys very scale , fast , heavy, and has a little tail waggle in crosswinds. I am using zippy 4000 40C , stuffed all the way into the nose , using the factory C of G . I launch on a bungee cart with the gear retracted , to land I dive towards the field and drop the gear , then bleed out all the airspeed as I lower the EDF power , touch down on the rear gear and hold my flare until the nose drops. So far everything has worked perfectly. Note the elevator is really small (scale ) , so watch out it in turns where your airspeed is slow. never fly this bird below 60pcnt throttle , it needs speed!

Beautiful Jet , fan is balanced , retracts needed some adjustment and some extra glue and support on the servos. It appears to have already had a coat of clear . I added two more coats or water borne urethane today after final assembly( speed and durability) . Note,no pilot or glue included . This is the best quality plane I have bought from HobbyKing

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Beautiful Jet , fan is balanced , retracts needed some adjustment and some extra glue and support on the servos. It appears to have already had a coat of clear . I added two more coats or water borne urethane today after final assembly( speed and durability) . Note,no pilot or glue included . This is the best quality plane I have bought from HobbyKing

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save