New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

羽化轴扳手的遥控直升机

羽化轴扳手的遥控直升机

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 15.01
状态:
有货
SKU:
297000006
WANT FREE SHIPPING? Click here to find out more!

这是一个高品质的羽化轴扳手与遥控直升机使用。它具有采用4mm的6mm,8毫米到10mm单向轴承将举行您的羽化轴位置,以便可以从轴的末端拧螺栓。

这是为了在你的直升机飞行箱,大家都知道是多么困难可以得到,去年螺栓出羽化轴的一个非常有用的工具。有了这个工具,就没有必要使用钳子,这将损害您的羽化轴的表面。简单地轴滑入适当大小的一种方式承载锁定轴到位螺栓拆卸。

*注:适合羽化轴尺寸4毫米的6mm,8毫米到10mm。

  • SKU 297000006
  • Brand -
  • 容量(mAh) -
  • 重量 89.0000
  • 长度 112.00
  • 15.00
  • 高度 55.00
  • Turnigy Feathering Shaft Wrench

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great wrench. Its very nice to have 4 sizes in one unit. It fits all my helies except for the smallest 3mm feathering shaft on the older trex 450 flybarred units. The one way bearings work great with no slipping. Now we just need one that does 5 sizes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great wrench. Its very nice to have 4 sizes in one unit. It fits all my helies except for the smallest 3mm feathering shaft on the older trex 450 flybarred units. The one way bearings work great with no slipping. Now we just need one that does 5 sizes.

Should have bought two. My friends have borrowed it and used it more that I have. Love it and for the money, it can't be beat.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Should have bought two. My friends have borrowed it and used it more that I have. Love it and for the money, it can't be beat.

I have 7 heli... So u can catch

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 7 heli... So u can catch

Nice hand tool, works well! Quality is medium but ok!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice hand tool, works well! Quality is medium but ok!

Sehr nuetzlich, um gut gesicherte Schrauben aus einer noch intakten Blattlagerwelle zu drehen. So ein kleines Werkzeug habe ich gesucht und jetzt gefunden. Danke Hobbyking!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr nuetzlich, um gut gesicherte Schrauben aus einer noch intakten Blattlagerwelle zu drehen. So ein kleines Werkzeug habe ich gesucht und jetzt gefunden. Danke Hobbyking!

I dropped it a few points because it doesn't work for my feathering shaft despite appearing to be suitable for 450 Helicopters.
Maybe (TBF) I should have realised that my particular feathering shaft is smaller in diameter than 4mm (TREX SE style helicopters use a 3.5mm shaft.
I'm hoping I can find a material to make a sleeve now that will make my 3.5mm shaft fit one of the one way bearings.
If this stops someone making the same mistake that I did, then it was worth the writing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I dropped it a few points because it doesn't work for my feathering shaft despite appearing to be suitable for 450 Helicopters.
Maybe (TBF) I should have realised that my particular feathering shaft is smaller in diameter than 4mm (TREX SE style helicopters use a 3.5mm shaft.
I'm hoping I can find a material to make a sleeve now that will make my 3.5mm shaft fit one of the one way bearings.
If this stops someone making the same mistake that I did, then it was worth the writing.

Looks like this unit is made by Tarot. It's great quality, arrived a bit greasy and dirty but that's fine. I'm not sure what type of feathering shafts it's meant for by my Trex500 shaft fits in the second smallest bearing, the rest are huge! I can't see a main shaft ever needing to be clamped down, but it does fit larger main shafts as well. Unfortunately, does not fit 250/450 feathering shafts. They are too small. Would be nice if there were smaller sized bearings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks like this unit is made by Tarot. It's great quality, arrived a bit greasy and dirty but that's fine. I'm not sure what type of feathering shafts it's meant for by my Trex500 shaft fits in the second smallest bearing, the rest are huge! I can't see a main shaft ever needing to be clamped down, but it does fit larger main shafts as well. Unfortunately, does not fit 250/450 feathering shafts. They are too small. Would be nice if there were smaller sized bearings.

Fantastic tool! No more scratches on brand new feathering shafts! Also very good to remove feathering shafts for maintenance or after a crash. I recommend this product!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic tool! No more scratches on brand new feathering shafts! Also very good to remove feathering shafts for maintenance or after a crash. I recommend this product!

alles bestens wie gewohnt

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

alles bestens wie gewohnt

uselo para revisar las balineras del main rotor de su helicoptero

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

uselo para revisar las balineras del main rotor de su helicoptero

  1. 1
  2. 2
  3. 3
  4. 4

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!