New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

玻纤复合YAK54 0.46 3D套件

玻纤复合YAK54 0.46 3D套件

Discontinued Product

Please continue searching for a similar product.
SKU:
YAK-542C46
WANT FREE SHIPPING? Click here to find out more!

这种3D YAK54复合飞机是很好的,真的很好!
一个完全成型的机身给人的飞机体形巨大,而且形式以及作为光源,这不能用轻单独实现。该YAK54是精美的彩绘,包括铝合金起落架,尾轮和车轮争吵。

最初设计用于0.46焕发发动机,YAK54可以采取类似的电气系统没有修改,并使用天篷作为电池舱盖。

这真棒3D平面合适的电机是我们的G46-670或类似尺寸的外转子。

规格。
翼展:1330毫米(52.3in)
机翼面积:32SsqDm
长度:1160毫米(45.6in)
飞行重量:2700〜2800克
材料:保险丝:玻璃钢,永:铺层/巴尔沙/电影
起落架:合金

发光设置
电台:您自己的TX与RX
伺服:5 x标准舵机
发动机:0.40至0.46 2中风或0.52四冲程发动机发光
电池:电池RX

EP设置
电台:您自己的TX与RX
伺服:4 x标准舵机
电机:Turnigy G46-670
ESC:60A
电池:4秒〜5秒4500〜5000mAh的电池20C

  • SKU YAK-542C46
  • Brand -
  • 容量(mAh) -
  • 重量 4377.0000
  • 长度 885.00
  • 235.00
  • 高度 390.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Es necesario reforzar la cola, ya que he visto como se partia en dos modelos, es necesario colocar una tira de fibra de carbono y unos tirantes hasta el timon, tambien viene bien reforzar con un poco de fibra la base donde atornilla el tren de aterrizaje, es muy debil y al minimo aterrizaje un poco brusco, se parte el fuselaje.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Es necesario reforzar la cola, ya que he visto como se partia en dos modelos, es necesario colocar una tira de fibra de carbono y unos tirantes hasta el timon, tambien viene bien reforzar con un poco de fibra la base donde atornilla el tren de aterrizaje, es muy debil y al minimo aterrizaje un poco brusco, se parte el fuselaje.

precisa de mais de 200gramas na frente uma merda o projeto voa mal igual ao decathlon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

precisa de mais de 200gramas na frente uma merda o projeto voa mal igual ao decathlon

Not the best paint job in the world, Mine if you look close it has lots of paint cracks and it's never been flown. It's almost like the paint isn't flexable enough for the fiberglass, I'm wondering what it's going to look like in a couple months.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not the best paint job in the world, Mine if you look close it has lots of paint cracks and it's never been flown. It's almost like the paint isn't flexable enough for the fiberglass, I'm wondering what it's going to look like in a couple months.

today made its maiden flight.i put the 15cc gas engine from hobby king.standar metal gear servo hobby king.1 pack 4.8v nimh for reciver and a 7,4 v 2200 mah with bec 5v for the ignition. the plane needs another 350 grams weight forward. In air was very stable at slow speed.in 3d just perfect. The landing was very easy.
very good plane. I strongly recommend you

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

today made its maiden flight.i put the 15cc gas engine from hobby king.standar metal gear servo hobby king.1 pack 4.8v nimh for reciver and a 7,4 v 2200 mah with bec 5v for the ignition. the plane needs another 350 grams weight forward. In air was very stable at slow speed.in 3d just perfect. The landing was very easy.
very good plane. I strongly recommend you

I got mine today everything were well packed, cant wait till i start buliding this babe, i have a 9cc gasser i will put in this coming weekend. I hope it flys well

Good job hobbyking. Keep up the good work

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got mine today everything were well packed, cant wait till i start buliding this babe, i have a 9cc gasser i will put in this coming weekend. I hope it flys well

Good job hobbyking. Keep up the good work

Running ASP52 2stroke and 12X6 prop, underpowered will change to a 11X6 prop to try and get the revs up.



I had the rear stabilizer break on both sides of the fuselage, the balsa frame where the elevator hinges glue to tore apart on one side and the 2 main balsa stick frames on the other side of the plane snapped 5 minutes into the maiden flight.



I added approx 100g of lead to front of the plane to get CG 85mm back from LE, this balanced perfect. The plane has a good roll rate and flys great can easily pull the power off and glide in for landing.



Quality of the overall plane is very good (apart from the rear stabiliser being too weak).



Will post some build pics soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Running ASP52 2stroke and 12X6 prop, underpowered will change to a 11X6 prop to try and get the revs up.



I had the rear stabilizer break on both sides of the fuselage, the balsa frame where the elevator hinges glue to tore apart on one side and the 2 main balsa stick frames on the other side of the plane snapped 5 minutes into the maiden flight.



I added approx 100g of lead to front of the plane to get CG 85mm back from LE, this balanced perfect. The plane has a good roll rate and flys great can easily pull the power off and glide in for landing.



Quality of the overall plane is very good (apart from the rear stabiliser being too weak).



Will post some build pics soon.

Hi Mr.Mach1 ..



its approximately about $115.91 by EMS Express..



AND, $36.13 by Air Parcel ..



actually you can know any shipping cost by try to buy it , but dont confirm it ..



i hope i help you ..



Best Regards



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi Mr.Mach1 ..



its approximately about $115.91 by EMS Express..



AND, $36.13 by Air Parcel ..



actually you can know any shipping cost by try to buy it , but dont confirm it ..



i hope i help you ..



Best Regards



Got mine today nicely made and good quality. Waiting for a good day to fly it, just nearly finished building it, using a O.S .46 with a Turngy 11/7 wooden prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got mine today nicely made and good quality. Waiting for a good day to fly it, just nearly finished building it, using a O.S .46 with a Turngy 11/7 wooden prop

Hi , I bought this one and found the bulid quality excelent , although I changed the wheels (the original were too small) I found the CG to be spot on but I had to load over 200 grams of lead in the cowling (nose)and Im using 5c 5,000 mah turnigy akku to get the balance right , The First flight was super although the hohen ruder was a bit severe
you need a long long airfield for this one and DONT try to land it slowly because of the weight it falls like a wet sack of cement .I used the G 46 motor and it performed suoer . Fazit. Super build, a bit on the heavy side and stricty not for beginners way too fast , in the air flys very direckt ...have fun ..
PB

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi , I bought this one and found the bulid quality excelent , although I changed the wheels (the original were too small) I found the CG to be spot on but I had to load over 200 grams of lead in the cowling (nose)and Im using 5c 5,000 mah turnigy akku to get the balance right , The First flight was super although the hohen ruder was a bit severe
you need a long long airfield for this one and DONT try to land it slowly because of the weight it falls like a wet sack of cement .I used the G 46 motor and it performed suoer . Fazit. Super build, a bit on the heavy side and stricty not for beginners way too fast , in the air flys very direckt ...have fun ..
PB

This is a very nic RC control model. Very quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very nic RC control model. Very quality.

  1. 1
  2. 2
HK manual YAK-542C46 Download [2700]
HK manual YAK-542C46 Download [2700]
With Thunber Tiger pro .46 Download [472]
Thunder Tiger pro .46 Download [1499]
Thunder Tiger pro .46 2 Download [1569]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!