注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

浮士德1600 EPO /塑料1600毫米(PNF)

浮士德1600 EPO /塑料1600毫米(PNF)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 155.61
Rating:
Stock:
重量:
3184
SKU:
043000018-0

Price War

battery
acc
产品介绍

浮士德1600EX是一个有吸引力的和高档的设计FPV平台,简洁的功能,使这个模型在它的班上最好的一节AA主机。

对于韧性和可靠性,该机型配有吹塑成型机身,它利用尼龙,几乎是indestructable,飞行面都是从艰难的EPO泡沫制成。从实用性的角度来看,翅膀插件和模型不要求胶进行组装。一切都只是螺丝在一起。外篷纯粹是为了外观和当浮士德1600EX是作为飞行滑翔机时,尽管秒unclips,露出了相机准备好平台,完成平移/倾斜伺服安装孔已预先成型。这个大相机平台/翼盖由一个快速释放闩锁与安全拆除后,揭示了安装电池和FPV设备上预先安装夹板板巨大的树冠面积。所有的伺服系统,电机及ESC当然是预装。

两片机翼有如果需要加成型G的指标C对快速飞行前检查底部添加襟翼造型。毫无疑问,这是一个很好的价格高档的设计,高品质的FPV模型。这将是公平地说,这是更具吸引力的看比大多数FPV平台,更不用说更加强硬,在浮士德1600EX会给RC试点时间享受了很多年来!

特征:
•即插即用飞 - 只需添加你的电池,发射器和接收器的选择
•模压EPO机翼和吹塑成型的塑料机身
•宽敞的机身正面车厢
•冠/孵化具有平底安装摄像头FPV
•稳定的飞行性能
•可选襟翼
•翼安装FPV天线的平板安装船尾平台

眼镜:
翼展:1600毫米
长度:1044毫米
飞行重量:950克
电机:2812 1400KV 无刷
ESC:30A ESC
伺服:4×9克

需要:
4〜5 CH发射机和接收机
3S 11.1V 1800〜2200mAh的电池lipoly

Product
Specifications

额外信息

  • 商品编号:
    043000018-0
  • Brand:
  • 重量(g)
    3184.00
  • 长度
    1050.00
  • 宽:
    170.00
  • 高度:
    240.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
love this place. solid construction and decent glide capabilities, haven't had it long but so far it's outstanding i did swap out the motor and speedy as well as aileron servo's and elevator servo. and used them for flaps while using mg servo's all round, only because of the distance i want to do with this i dont want any failures.

all in all on the build i'd tell everyone to go buy one.!!!

love it!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The electronics are crap so I replaced the lot.
The plane itself isnt too bad but and its a big but...
The motor mount and pod are awful.
They are both soft and brittle.
I have ordered the V2 mount from Hobbyking in the hope that I will at last have a good fpv platform.
In the end this has cost me nearly double the buying price to get it working well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The FPV raptor 1.6 is the best fpv plane i have had. Its rugged and has loads of carrying capacity. Just replace the electronics. They really need to supply a kit version.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is great aircraft. The only thing that lets this aircraft down are the wing bolts, it would be more convenient if it had some type to thumb screws or quick release system.

Has good pay load capacity, and EPO foam is good quality.

Packaging could be better to protect the aircraft, mine had damaged on vertical stabiliser, but nothing a quick soaking in boiling water couldnt straighten out.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The decals I received where like 100 years old, all curled up and they dont stick. Hinges also need some reinforcement but those minor complaints aside, quality wise it seems fine, and a fairly easy build. There is LOTS of room in the fuselage, I shouldnt have problems mounting a flight controller, GPS, OSD, and amp sensor.

I flew the maiden with a 2200mAH battery and no fpv gear besides a mobius in the cockpit. Its borderline tail heavy even in that configuration, pitch stability was bad, didnt fly nicely. Forget about even smaller batteries, with a 2700 and 3300 it balances out and becomes a much nicer plane to fly, however, it also becomes even more underpowered than it was. Its OK for FPV and learning how to fly, but the power just isnt there to get you out of trouble, and even doing a looping from level flight is nearly impossible without diving for speed first.

Lack of power makes take off also a bit of a challenge, it needs a healty throw. Although I did manage to take off from the snow with no problems. Maybe it will work on (wet) grass too.

Power aside, flight characteristics are very good. Glide angle is excellent and I suspect flight times will be impressive (didnt time my flights, and it was freezing cold, but I suspect 20 minutes will be a given). She is pretty forgiving when stalled (if cg is correct), rolls nicely, doesnt 'auto level' like a bixler, but i
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
<a href='http://www.hobbyking.com/hobbycity/store/uploads/684449117X991778X39.JPG' target=_blank>Igor</a>

'''
http://youtu.be/Jksawf6IYuc
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased for my first FPV flying experience and flew well but felt a little under powered. Replaced all my servos for metal geared and fitted 40A ESC and a NTM 28mm 1400kv motor......perfect.
I went a step further and swapped out the wings for 2m Phoenix 2000 wings with minor alterations. Maidened it today and what a great plane for FPV gliding about was perfect. Needs a fair bit of weight in the nose and 2 x 2200mAh 3S batteries are perfect. As it doesn't use much power flight times are great too. HIGHLY RECOMMENDED.....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
May be a little under powered but this plane can take a beating. Went into a nose dive close to the ground and hit with a load bang. Picked it up and brushed off the dirt to find a little gouge in the nose. I replaced the battery and check the flight controls and I was flying in 5 mins.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I can't really recommend this one because it requires so much upgrading to make it good. Mine arrived with 2 dead servos so I replaced most of them. The body is hard plastic, which is nice, but it's also heavy meaning that if you're going to put in a big battery and FPV gear then you also need to upgrade the motor. With stock motor it's ok but slightly underpowered and definitely will NOT take off from the ground as advertised, even with a 2200 in there. I ended up upgrading the motor to a Rimfire .10, which now allows it to take off from the ground and gain altitude reasonably quickly. Of course this also required a new ESC. You can see where this is going... It's now a much more expensive model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received it the other day double boxed which was good as outer box damaged,Hole in the side inner box was all good, on open the box wings wrapped in bubble wrap no damage, fuselage is bigger than expected blow moulded plastic as is the Phoenix. All bits and pieces are as they should be seems as though there are lots of spare screws 2 spare clevises and there was safety clevises rubber bands. Motor pod fits well and 4 screws to secure and is as described and esc, rudder and elevator fit in plastic clamp which clamps through tail section 2 screws for elevator and 2 screws for rudder all fit good, now for the bonus if you have a Phoenix the wing are exactly the same so the 2 meter wings fit and if you have the 2000 Phoenix you know have the 1600 Phoenix as these wings fit. All in all happy with purchase and HK service. Maiden flight to follow.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Firstar EX Glider

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

battery
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。