建议马达和螺旋桨5×5提供基于你的飞行作风性能和飞行时间。您将需要一个2100kv无刷外转子，4×9克伺服系统，一个1600mAh的2200毫安〜3S1P Lipoly电池（根据负载的要求）一个20安培ESC和你自己的发射器和接收器（TX / RX）来完成这个模型。
你自己的RX / TX
Great plane for the novice and the more professional Pilotwhat a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.
I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.Had this plane 2 months now being a beginner i have already crashed alot but this plane is extremely durable and easily glues back together, i used the 11.1v 2200mAh x-thin zippy batteries(PRODUCT ID: Z22003S-25-X) which fit perfectly without having to remove any foam from the battery compartment, this battery gives extremely long run times in excess of 30mins and the motor has plenty of power with the 5x5 supplied prop, overall i would highly recommend this to any beginner and experienced RC pilotBrilliant model to fly. Great fun and has really good performance at both fast and slow speeds. Was half expecting the wings to snap at one point but it stood up really well.There's a version with the stock motor that's not this one. Great plank for FPV, and it glides oh so well! Very quick to put together... the spar for the wings actually works very well... if you want a slow FPV flyer with a decent amount of room, this is it!
The motor is a little weak, but it will get you well in the air, just don't expect blazing speeds :) I cut into the fuselage to mount a naze32 running baseflight since they added RTH code. Haven't tested it yet but did maiden it last weekend and for FPV this is a LOT of fun!easy build
just under 500G with no aileron, 2S 2200 and a 2805, 6X5 slowfly, 400G thrust more than enough as i did not want speed
flies good in the wind
yes, very little room in the fuselage for FPV stuff for example, but with no canopy or an homemade one it will be ok.
and for 42 you can't go wrong as it is a very good and nice to see fly oneMy introduction to electric planes, and Im so happy about it.
Very very easy to fly and incredibly strand in a crash. I have crashed tis into the sean and even had a battery fire and its still going! Its easy to build, but you need something like a 2200mah battery otherwise its tail heavy. I fly a Gopro on top of mine all day
Im running a 30a ESC, a 2200 motor it is incredible...buy it buy it buy it!This plane is similar to the multiplex easystar, its a little bit smaller, but the behavior its almost the same.
Im using a turnigy 2826 with the original propeller and 3s 2200mah batteries, its not very fast but is good to learn. Its not easy to fit the motor, had to cut the plastic piece where the engine is fixed to. Also does not have many space inside with all the wires passing near the servos and the rods.
For a beginning is problably a good choice. (I didnt crash mine, so i dont know if its good on that aspect)Ok floater, space for electrics is tiny though, I had to cut the centre to get the wires in but flies well
Manual download now [493kb] my axn floater-jet download now [233kb] my axn floater-jet download now [233kb] Manual 01 download now [121kb] Manual 02 download now [121kb] Manual 03 download now [135kb] motor_2 download now [139kb] motor_1 download now [129kb] cabin download now [224kb]