注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

浮子喷气EPO与电机1290毫米(ARF)

浮子喷气EPO与电机1290毫米(ARF)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 74.90
Rating:
Stock:
重量:
2598
SKU:
AXN-C-MOT

Price War

产品介绍

该AXN浮子飞机是初学者一个完美的模型。其稳定的飞行特性和宽容的处理,使其成为学习飞行的理想平台。不像在同级车某些型号的AXN浮动框喷射带有副翼开箱的。这是所有飞行员萌芽应该掌握关键控制面。

由强EPO泡沫具有高光泽度的AXN浮动框-Jet是能够在一个小的空间量实现高速或优雅地滑翔周围微风只需要油门来获得高度的构造。

在可预见的飞行特性,低翼载和推道具也让AXN浮动框喷气用于FPV的理想平台。使用较小的电池,如1600mAh的至1800mAh的3S1P将允许在飞机的前部附加的有效载荷,并找到正确的CG而无需添加额外的尾部的重量容易。

所包含的电机和5x5的螺旋桨提供基于你的飞行作风性能和飞行时间。你将需要4×9克伺服系统,一个1600mAh的2200毫安〜3S1P Lipoly电池(根据负载的要求)一个20安培ESC和你自己的发射器和接收器(TX / RX)来完成这个模型。

经验证一次又一次的AXN浮动框喷气蜱所有正确的箱子任何人都希望获得到的爱好作为一个初学者或中级飞行员希望获得在FPV飞行的令人兴奋的世界。

产品规格:
翼展:1290毫米
保险丝长度:860毫米
电机:2100Kv先驱者(包括)
螺旋桨:5x5inch(2PC包括)
ESC:20A(不含税)
舵机:4×9克伺服(不含税)的方向舵,升降舵,副翼2倍

需要:
你自己的RX / TX
20A无刷电调
4×9克舵机
1600〜2200mAh的3S Lipoly

Product
Specifications

额外信息

  • 商品编号:
    AXN-C-MOT
  • Brand:
  • 重量(g)
    2598.00
  • 长度
    830.00
  • 宽:
    240.00
  • 高度:
    250.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Great beginners plane, lots of space, and more fun to fly than the Bixler. it's faster, and takes serious abuse.
Quality
Value
Overall
Quality
Value
Overall
Great fun plane, using stock motor and prop with 2650 3 cell lipo I am able to take off
from ground, added teflon on wings and fuse. Its 2.5 to 3 times faster than bixler3.
approx; 65-70 mph and 15 flight time.
Quality
Value
Overall
Quality
Value
Overall
BEGINNER BUYERS BEWARE: Don't make the mistake I made thinking that this, or any similar plane is a "beginner" rc plane, after reading many overly positive, mostly misleading descriptions on this site. If you have not flown an rc plane before, you CANNOT fly an rc plane, and you WILL crash. Don't dive straight into the hobby, start off with a much cheaper plane of some kind that you aren't worried about crashing, or if your lucky to have a nearby hobby shop with a flight simulator, use it. You will be worried about crashing this plane, it is capable of a lot more than crashing. A bit more to the product... What reduced my value and quality rating, is that rather annoyingly this does not come with any glue to put it together with. Very few to no glues an average person would know about and could find in the local supermarket, can stick this material together. Otherwise, this is a good product, respectably strong, easy to assemble and good looking.
Quality
Value
Overall
Quality
Value
Overall
I have just received my AXN from Hobby King and to my surprise I didn't get the tube of glue in the parts bag. After chatting with CS, they inform me that IT IS NOT part of the kit. They tell me that a compatible glue to use is the clear foam glue BUT GUESS WHAT?????, it's on back order here in Australia AND upon checking the chat for this glue, it appears IT CANNOT be ordered here in Australia even from the International warehouse, so now I have to find an alternate glue to assemble this plane..................... NOT HAPPY :-(
Quality
Value
Overall
Quality
Value
Overall
Its a great plane...however they didn't include glue with the package which is kinda annoying. But the worst part is they sent one with a USED or refurbished motor, you can tell one of the magnets was reglued with epoxy because it was messy and not done well while the rest of them were perfect. Not worth the hassle of trying to get hobbyking to replace it so overall a bad situation. Otherwise yeah get one its a nice plane.

Quality
Value
Overall
Quality
Value
Overall
Overall not a bad plane, you just have to know that it will tip stall at low speeds on turns, other than that flaw its a nice plane to fly and has a great straight glide, I even found a thermo which kept it flying and increased it's altitude without any motor power(first time I have done this). I am mainly using this plane as an FPV plane and therefor I have scratch built a balsa canopy with a camera mount, the balsa canopy is covered in blue mono-coat. A few other mods I have completed are the reinforced motor mount(balsa and mono-coat again), a belly access hatch and I modified a Bixler2 landing gear using large wheels so I can take off using FPV from the grass. The last upgrade I will be doing is changing the motor and placing a better Turnigy 2200KV motor on it, something a little more reliable than the one that came with it. Still waiting for that one. I have pictures of all the current mods in the files section if anyone is interested in checking them out.
Quality
Value
Overall
Quality
Value
Overall
An amazing plane. Easy to fly for beginners but push up the power and you can do basic aero with it. Pull back the power and fly it like a sailplane. 2 solid crashes (including one from inverted) and essentially no damage that a bit of steam and boiling water won't fix. Only negatives are that the ESC ventilation is not great in really hot weather (airflow is mostly blocked by battery), aileron pushrods are slightly too short and the 5x5 prop is not very good. Get a good APC 6x4 prop, cut a small vent for the ESC (if you wish), add some bright graphics/stickers on the bottom of the wings and longer pushrods for the ailerons and you have as near perfect as possible beginner-intermediate plane. Still a go to favorite even in moderate winds.
Quality
Value
Overall
Quality
Value
Overall
I like this plane so much that i've bought a new and now i'm go to make the wings removeable so i can take it with me on vacation.
My favorit beginner plane than comes walrus and then the bixler 2.
I don't have a bixler 1 so i can't give my opinion of that one.
Flys great whit 6x5 prop just little bit noisy.
Quality
Value
Overall
Quality
Value
Overall
Really enjoyed flying this plane for the first 10mins it was air, until a bird attacked it and it fell out of the sky. Will purchase another
Quality
Value
Overall
Quality
Value
Overall
This is my first plane since about 30 yrs ago and I am very happy. IT is an awesome fun aircraft to fly. I've crashed it once and had a couple of hard landings and with minor glue and tape I was back in the air in minimal time. It has been very forgiving and as said is fun to fly. I may buy another just to ensure I always have one of these.
Quality
Value
Overall
View all reviews
Upload
Videos
  • HK Floater Jet with Turnigy Graphene 1500mAh 3S 65C and 6x5 Prop.

Upload
Files

产品标签

使用空格分隔标签。使用单引号(')标注词组。