注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

FPV 433MHz的无线电遥测套件为100mW

FPV 433MHz的无线电遥测套件为100mW

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
47
SKU:
9387000017
产品介绍

这种无线电遥测系统被设计成一个开放源码的XBee更换收音机,提供了较低的价格,射程更远(大约1英里)和卓越的性能的XBee收音机。它在915MHz的433MHz的和可用的;并在下列配置:串行板(用于空气)和USB(用于接地)。

该系统提供了使用自定义的运行开源固件HopeRF的HM-TRP模块全双工链路。接口模块通过标准的5V兼容TTL串口/ USB FT232系列。

啬固件包括一个引导程序是通过串行接口允许无线固件升级,并与配置参数无线电固件。固件升级和配置在APM任务规划的充分支持。配置也是可能的通过3DR无线电配置器和AT命令。

特征:
•超小尺寸
•重量轻(低于4克不含天线)
•接收器灵敏度为-121 dBm的
•发射功率高达20dBm的(100mW的)
•透明串行链路
•空中数据传输速率高达250kbps
•约长1英里范围
•MAVLink协议帧和状态报告
•跳频扩频(FHSS)
•自适应时分多路复用(TDM)
•对于LBT和AFA支持
•可配置的占空比
•内置纠错码(可以纠正多达25%的数据的位错误)
•用小全向天线的几公里范围内展示
•可与一个双向放大器被用于更多的范围
•开源固件
•无线电配置AT命令
•RT远程无线电配置命令
•自适应流量控制与APM使用时
•在HopeRF HM-TRP无线电模块基于,设有一个SILABS SI1000射频微控制器

眼镜:
“空中”和“地面”的变体,分别FT232式引脚和USB连接器,
RP-SMA连接器
为100mW(20dBm的)的最大输出功率,1-20dBm之间调节
-117dBm灵敏度
标准TTL UART接口
数据传输和连接状态LED指示灯
外形尺寸(地面USB板):55x17mm
外形尺寸(空气串行板):46x20mm
重量(USB板接地):7.5克
重量(空气串行板):5.6克

该产品是基于3DRadio三维机器人项目。

Product
Specifications

额外信息

  • 商品编号:
    9387000017
  • Brand:
    N/A
  • 重量(g)
    47.00
  • 长度
    90.00
  • 宽:
    20.00
  • 高度:
    50.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I did order this 433 telemetry as a spare part. Now my existing telemetry with APM2.5 is broken, so I did decided to use this HK 433 telemetry between APM2.5 and MissionPlanner, as with previous one. It worked only one time, with power = 11 as from stock. The range was really very short, like 25m. Then I decided to increase power to 20 and I did update firmware using firmware update from Mission Planer. Update was "Success", but now it try to connect (green led is continue), but not able to connect with APM, it stops ar 30pcnt.
Do you guy have a good experience with this telemetry? Any tips how to make it working?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Struggled to get these to work with Mission planner at first, then realized they must connect at 57600, the APM's USB connection must also be unplugged. Updated and everything seems to work fine, I have not done a range check yet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plug and play setup with apm2.5. The range is only a few hundred feet, not nearly as far as 900mhz version out of the box. I think it needs a different antenna. Overall good buy works well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Been using this on my H-quad, Works very well, Having one part on the quad and the other connected to my Nexus 7 Tablet. easy to connect to APM 2.5 , Have the OSD and Telemetry Kit working together.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Oh my good! that's incredible



I use It on my Crius AIO with Arduplane/Megapirate software



very good item for you telemetry stuff at an incredible price



Thankyou Hobbyking



Really a very good item
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。