注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

FPV倾斜摄像机安装起落架

FPV倾斜摄像机安装起落架

QTY:

Now save 保存 AU$ 18.24 AU$ 18.24

Special Price AU$ 6.19 AU$ 6.19

You save 保存 AU$ 18.24 AU$ 18.24

Was  AU$ 24.43

Rating:
Stock:
重量:
197
SKU:
HELI-MOUNT

Price War

产品介绍
该HobbyKing FPV倾斜摄像机安装系统是一个简单易用的方式安装摄像机。适用于450〜500级直升机和重量轻的玻璃纤维材料制成。安装板设有用于安装您的直升机和搬迁摄像机安装,以获得正确的COG调节螺丝的位置。套件包括螺钉,球形座,连接杆,联系和预切玻纤板。
 
 
产品规格:
身高:185毫米(到安装板)
橇宽度:190毫米
滑移长度:290毫米
摄像机安装区域宽度:110毫米
摄像头安装面积高度:100毫米
干重:188克(不包括伺服)
 材料: 玻璃纤维

需要:
1个9克伺服
Product
Specifications

额外信息

  • 商品编号:
    HELI-MOUNT
  • Brand:
  • 重量(g)
    197.00
  • 长度
    250.00
  • 宽:
    22.00
  • 高度:
    180.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
nice gimball and easy to customise. and the price !!!! I Will buy 3 more
Quality
Value
Overall
Quality
Value
Overall
Very good for the price 0.64!!
I really cannot complain at that price. but if i really had to moan it would be 2 things.
NO instructions, i had to build it by copying from the website photo
The graphite needs to be filled to fit into the slots. then i glued it to make sure it wouldnt come apart
Quality
Value
Overall
Quality
Value
Overall
Prodotto di buona fattura, nessun problema nell'assemblaggio ma chiaramente essendo in fibra risulta fragile agli urti.
Quality
Value
Overall
Quality
Value
Overall
the skids connection and post's is very weak going in force at that point
Quality
Value
Overall
Quality
Value
Overall
Very tight fitting parts, and solid hardware. As others have mentioned, worth it for the camera mount alone. USA West selling at only $4.99 (at time of review) http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=35019
Quality
Value
Overall
Quality
Value
Overall
Great product, very flexible and easy to assemble.
Quality
Value
Overall
Quality
Value
Overall
Pretty decent little mount. The gimbal is fine, though I would recommend a high quality servo to compensate for the cheap bearing assembly. I used a bunch of zip ties to attach it to my DJI Naza Flamewheel 450. I sandwiched some pieces of surgical tubing in between the quad frame and the landing gear, to help isolate the camera from vibrations. Works pretty well.
Quality
Value
Overall
Quality
Value
Overall
This fit perfectly my Turnigy Talon V1 Hexacopter. No modification needed although it does change the battery mounting point. It could use a cross strut (or cable) to support extra load, but otherwise a nice fit and weight.
Quality
Value
Overall
Quality
Value
Overall
Looks flimsy but works well and is pretty sturdy once it is together. Fitment is very tight just when you think you have it together as tight as it will go it moves a little more. 4 stars because it takes the camera far enough away from all the electronics and when mounted on the skids like I did there is little to no vibrations, so no noise little to no vibrations what we all want when filming in the air. It comes with no instructions or epoxy but with these pictures I got it together then used 5 minute epoxy to make sure it stays together. Only real downfall of this is when you flush mount your heli to it the canopy will not fit so either you cut the canopy to fit or just mount it to the skids like I did. All in all its good and works better than it looks there are definitely better products but for 20$ I can not complain it does what I need it to. Last note on this is when mounted to the skids there is a perfect plate to mount a smaller camera I am going to use that for FPV.
Quality
Value
Overall
Quality
Value
Overall
Simple and easy but good.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。