注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

Goteck BL1511S数字无刷MG高扭矩低轮廓车载伺服45克/12公斤/ 0.07sec

Goteck BL1511S数字无刷MG高扭矩低轮廓车载伺服45克/12公斤/ 0.07sec

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 34.14
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
123
SKU:
573000032-0

Price War

产品介绍

数字高扭矩低姿态车舵机的Goteck范围均达到当中有一些最好的质量和可靠性,对物超所值的代价。由高强度纤维制成的顶部和底部的情况下增强尼龙和中心壳体是数控从固体6061铝合金加工,这作为一个很好的散热片为电机和放大器。

该BL1511S提供面向金属,低调数字伺服与具有出色的扭矩和令人难以置信的速度无刷电机。主要设计作为汽车伺服由于其低轮廓,但它会在家里同样在所有其它类型的模型。

特征:
•CNC加工6061铝合金中心案例
•纤维增强尼龙顶部和底部的情况下,
•金属齿轮系
•无刷电机
•双滚珠轴承
•重型塑料伺服喇叭和安装螺丝
•薄型

眼镜:
类型:BL1511S
功放: 数字
工作电压:4.8V〜6V
扭矩为10kg @ 4.8V〜12千克@ 6V
速度:0.08sec @ 4.8V〜0.07sec @ 6V
空闲电流:300毫安@ 4.8V〜350毫安@ 6V
工作电流:2800毫安@ 4.8V〜3000毫安@ 6V
外形尺寸:41x20x26mm
:45g
死区:1微秒
电机: 无刷
齿轮: 金属
案例:6061铝/尼龙纤维
伺服插拔:JR型
伺服引线长度为300mm

包括:
1个Goteck BL1511S薄型数字伺服
1 x双人床重型塑料机角
1 x单人床重型塑料机角
4个安装螺丝和垫圈

Product
Specifications

额外信息

  • 商品编号:
    573000032-0
  • Brand:
  • 重量(g)
    123.00
  • 长度
    80.00
  • 宽:
    35.00
  • 高度:
    60.00
  • 速度(秒/ 60deg )
    0.07
  • 扭矩(公斤)(最少0.01公斤)
    12.00
  • Unit Weight (g):
    45
  • A(毫米):
    31.00
  • B(毫米)
    41.00
  • C(毫米)
    26.00
  • D(毫米):
    20.00
  • E(毫米):
    54.00
  • F(毫米)
    17.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality servo. Use it as a retract servo for my Hyperion Hayate 40e size plane. Setup burnt a lower end servo previously. This servo handles the load well. But it got pretty hot. Hope it holds for maiden.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered only one servo and tested in terms of speed. It is very good! My only problem is that the servo horn simply did not fit! It was impossible to assemble! Any other servo horn was ok except the included one... Have you met this problem? Strange that the product picture also shows unfinished inner part of the horn...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ottimo servocomando molto veloce 0,07 secondi e potente 12 Kg considerando che si tratta di un servocomando a basso profilo. inoltre estremamente leggero 45 gr ingranaggi in metallo e cassa mista plastica metallo. ottimo rapporto qualit prezzo pu essere tranquillamente paragonato a servocomandi di prezzo decisamente superiore. consigliatissimo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this servo on my trooper and it works great, fast. I opened the bottom plate to make sure it has seal or not and yes it has rubber seal on the bottom plate and also on the screws. So I think this servo is also waterproofed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Centering problem. Good price for a brushless
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got three of these to try out. 1 for my Xray X1 and 2 for my NT1. I installed the F1 servo and it was TERRIBLE. It was non responsive to sub trim adjustments and would jump to position after 30 or so sub trim steps. Then once on track it would never return to the same center position. This caused the car to wonder aimlessly. I didn't even bother opening the other 2 servos up. I'm returning all. Of course I could have just got a bad one to start off with but it's just not worth the trouble. Much better / proven servo for just a bit more money on the market.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very responsive servo. I have 2, using one for steering in my electric 1/10th tourer and throttle/brakes servo on 1/10th nitro tourer.

Current draw is quite high. It causes 3 times the voltage droop compared to the full size KO Propo steering servo in the same model.

Still great value for the money.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。