New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HexTronik20克无刷先驱者2300kv

HexTronik20克无刷先驱者2300kv

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 13.50
状态:
有货
SKU:
HXM2211-2300
WANT FREE SHIPPING? Click here to find out more!
尺寸:23毫米点¯x24毫米,34毫米(带轴)
重量:20g(kv2300)(不包括连接器)
轴直径:2毫米
前轴长度:9.8毫米

最大性能
电压:2S
最大电流:5.3〜8.5A / 20S
道具:6X3〜7x3.5
推力:300克
功率:72W
对于200〜300克模型飞机(室内)。
  • SKU HXM2211-2300
  • Brand hexTronik
  • 重量 45.0000
  • 长度 65.00
  • Packaging Width 40.00
  • 高度 40.00
  • 千伏(转/ v)的 2300.00
  • 最大电流( A) 8.50
  • 电阻( MH) 0.00
  • 最大电压(V) 7.00
  • 功率(W) 72.00
  • 轴(MM) 2.00
  • 长度B (毫米) 22.00
  • 直径C(毫米) 22.00
  • 可以长深(mm ) 8.00
  • 总长度E(毫米) 33.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Includes no mounting screws. The holes are four smooth bore (i.e. not threaded) 2mm holes on a 16mm diameter circle (i.e. 16mm between pairs of opposite holes).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Includes no mounting screws. The holes are four smooth bore (i.e. not threaded) 2mm holes on a 16mm diameter circle (i.e. 16mm between pairs of opposite holes).

I own 5 of them. On 2S they let my 8-10 oz planes fly well. On 3S they will accelerate straight up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I own 5 of them. On 2S they let my 8-10 oz planes fly well. On 3S they will accelerate straight up.

Very good motor for small planes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good motor for small planes

This motor uses teensy tiny (about 1mm) grub screws to hold the motor in its mount. Some other motors I purchased from HK had the correct Allen key supplied with the motor so that you can tighten and loosen as required. I thought I had it covered with my own set of tools, but my key was a little loose and I managed to lose both grub screws after not really tightening them up enough, rendering the motor useless to me unless I can get some new grub screws, but they're gonna be rarer than hens teeth. Easier to just buy another motor (different one). Bit disappointed but the motor is still great value. Another weakness as on all these small motors is how easy it is to stress damage a motor lead from moving the motor around a bit. Be careful with them and good luck :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor uses teensy tiny (about 1mm) grub screws to hold the motor in its mount. Some other motors I purchased from HK had the correct Allen key supplied with the motor so that you can tighten and loosen as required. I thought I had it covered with my own set of tools, but my key was a little loose and I managed to lose both grub screws after not really tightening them up enough, rendering the motor useless to me unless I can get some new grub screws, but they're gonna be rarer than hens teeth. Easier to just buy another motor (different one). Bit disappointed but the motor is still great value. Another weakness as on all these small motors is how easy it is to stress damage a motor lead from moving the motor around a bit. Be careful with them and good luck :)

This motor rocks! Weighs 17g and will run on 2-4s batteries Use Plush 10a. esc. My data.. 5.25x3.5 Eflight prop, 3s 460mah, 6.5 amps 9-10oz thrust.
4s 500mah, 16 oz thust at 9.5a
4x4 GWS.. 23,000 rpm * 9a on 360mah 4s.
7x3.5 GWS 8oz thrust * 7a on 2s, 460mah

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor rocks! Weighs 17g and will run on 2-4s batteries Use Plush 10a. esc. My data.. 5.25x3.5 Eflight prop, 3s 460mah, 6.5 amps 9-10oz thrust.
4s 500mah, 16 oz thust at 9.5a
4x4 GWS.. 23,000 rpm * 9a on 360mah 4s.
7x3.5 GWS 8oz thrust * 7a on 2s, 460mah

This is my go-to motor for my mini-popwing, or bonsai. I use a 10amp birdie esc with a 500Mah 3 cell, and a 6030 prop. Talk about fast and agile.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my go-to motor for my mini-popwing, or bonsai. I use a 10amp birdie esc with a 500Mah 3 cell, and a 6030 prop. Talk about fast and agile.

good quality. works as described above.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good quality. works as described above.

a small motor. i bought to put in the micro stuka that HK sell.it be a bit fidily to get the screws through the back.it`ll be my first and last buy of this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

a small motor. i bought to put in the micro stuka that HK sell.it be a bit fidily to get the screws through the back.it`ll be my first and last buy of this motor.

I use this motor in a Bonsai wing with a 5x3 prop. works great. 10A esc and 500mah 2 cell batteries... enough to do loops and rolls without much effort. Great little motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in a Bonsai wing with a 5x3 prop. works great. 10A esc and 500mah 2 cell batteries... enough to do loops and rolls without much effort. Great little motor

Great motor for the price but mine comes with a lose bolt... so I fixed it using Loctite 242 Threadlocker....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor for the price but mine comes with a lose bolt... so I fixed it using Loctite 242 Threadlocker....

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!