电池：2×2200mAh的3S 20℃或更高。* FRN纤维增强尼龙
I purchased two of these recently and I'm glad I did it looks like I might be able to make one good one out of the two. The first kit had a scratched up chassis and the canopy was slightly cracked, but the moving parts all seem to be in good shape. The second kit had a better chassis, but the canopy was cracked severely and the main rotor has all sorts of weird motion; I suspect the links aren't set up correctly. This puts a real damper on the purchase; I kind of wish I hadn't bought these.
Had to replace all screws with higher quality screws. Main shaft was bent, but repairable. Oblong main gear also replaced. Fly's well.don't like this kit at all utter rubbish don't bother with it you will be gutted just not worth all the hassle getting it right to fly.just bin it utter waste of money they need tarots 500 in stock the quality of them is unbelievable much better all round. got one and flies like a dream.This is quite good for the price, however there's a few things you must pay attention to.
The screws are very soft and strip easily if you tighten them down too hard. The tail hub that comes with these is downright dangerous, don't use it, even the upraded metal one from hk also came without thrust bearings and almost came apart. Get tarot or align blade grips and hub. Also get CF servo mount, and metal mixing and washout arms,
You'll also want an align main gear as the one that comes with it is out of round.
For the prices it's definately worth your while if you're willing to work with all the smaller problems. The frame, shafts, and parts over all are pretty good. You'll be happy with the end result after putting in some time.this hk500 helicopters or utter crap.don't bother with them they cost you more in the long run rather buy align and be done with.i've learnt my a lesson.hobbyking need to redesign this completely.need to upgrade all the parts like the tarot kitsgreat heli, more than happy. the size is a major increase from the 450 which surprised me.
as previously stated, don`t forget to ground your tail boom for static lockout reasons caused by the friction in the belt.wow aselole heli mak nyuss pokoe siapa cepat dia dapatStill waiting for my hk500=(.. a jit item so maybe the horse broke a leg..
Anyways, my plan is
hs with 10pcnt off= 2400..ish
with 4s a123=2200...ishBuilt my HK-500. When taking the bits out of the box I was pleasantly surprised at the amount of metal parts in this kit. So initial impressions were good, all parts looked to be pretty well made, especially for this budget model. Canopy is horrid, but I knew that before purchase.
I had 'proper' align rear gearbox and head in my spares box, so decided to use these over the HK ones; the HK ones actually looked pretty good, but using my spare Align bits was all part of my plan when buying this kit.
Whilst I had the Align rear gearbox, I did use the HK rear blade grips, blades and tail slider as I didn't have align versions of those.
The kit went together well - time for a test-flight.
WARNING WARNING WARNING - my plastic rear blade grip exploded on the first flight (throttle set at ~70pcnt -> 1600kv motor, 6S, kit supplied pinion).
Thankfully the model was close enough to the ground that the catastrophic tail failure didn't end in total loss of the aircraft (obviously some damage that I need to fix). But more worryingly the exploding tail fragments hit my friend - luckily it didn't result in serious injury, but a few inches higher and they would have hit him in the face! He was ~5M away from the model by the way, so not irresponsibly close.
So, I might just have got the one and only unlucky one, but please consider the above when you use your HK-500 - especially for the fit's flying well at the moment. adjust the tracking off the blades it got a little vibration through.apart from that it flaying rock steady.love it
left side view download now [4960kb] 3/4 front view download now [5140kb] right side view download now [4939kb] 3/4 top view download now [5040kb] No File Name download now [1486kb] HK 500 GT download now [1486kb] No File Name download now [8951kb]