New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HKPilot微型GPS和罗盘模块了u-blox 7(8G)

HKPilot微型GPS和罗盘模块了u-blox 7(8G)

Discontinued Product

Please continue searching for a similar product.
SKU:
387000058-0
WANT FREE SHIPPING? Click here to find out more!

新HKPilot微型GPS和罗盘模块是完美的小班多转子,飞机甚至是独立的OSD应用。采用全新的了u-blox 7 MAX芯片组和匹配15×15双放大陶瓷天线,这条微GPS是包装完整大小的电源。微型GPS还具备霍尼韦尔HMC5883罗盘位置偏远,从干扰源得到您的指南针了。这一切权力和功能,都在刚刚8G,该HKPilot微型GPS都让自带电缆两个5针HKPilot兆(APM),以及6针HKPilot 32(Pixhalk)。这种微型GPS也是完美的MWC和Naze32应用也是如此。

特征:
•有源陶瓷天线,15×15mm的,带有两个LNA低噪声放大器
•与EMI防护设计UART接口的RXD端口可与5V电平信号输入兼容
•内建HMC5883罗盘I2C接口
•HG-U06与标准UART(TTL)串行接口GPS,常见于大部分的飞行控制
•默认设置波特率:38400,更新率:10Hz的
•56ch了u-blox 7多GNSS(GPS,GLONASS,伽利略,QZSS和SBAS)引擎

眼镜:
尺寸(mm):20(宽)×22(长)×8.5(高)
重量(g):8.2(不含线)
GPS模块:U-blox的MAX-7Q
板载接口:Molex公司1.25毫米-4Pin的(I2C),个6Pin(UART)

包括:
GPS模块* 1
I2C 4PIN线* 1
UART 6PIN到5pin的电缆* 1(适用于APM)
UART 6PIN到6PIN电缆* 1(对于PX4)

* PX4 / Pixhawk是一个独立的,开放源码,开放硬件项目,旨在提供一个高端的自动驾驶仪的学术,爱好和工业界(BSD许可)

**到APM的参考是指ArduPilot项目,基于Arduino的开源计算平台,通过3DR和开源社区开发对一个家庭的开源自动驾驶仪。它由ArduPilot兆(APM)电子的选择和各种免费软件版本不同的车辆,并通过一个开放源码的创作共用许可的管理。

*注:这是不是一个原始的Arduino品牌的产品。

  • SKU 387000058-0
  • Brand -
  • 容量(mAh) -
  • 重量 22.0000
  • 长度 80.00
  • 15.00
  • 高度 60.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Takes impossibly long times go get a fix. Was hoping to use it on a 250 FPV Quad, but now I fear the antenna is so lousy that it won't even work for return to home function.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Takes impossibly long times go get a fix. Was hoping to use it on a 250 FPV Quad, but now I fear the antenna is so lousy that it won't even work for return to home function.

It was needed to replace the diode which is in serie with the battery (the original one was a 0,5V one and I put a 0.2V one instead to get a better charge level of the battery, It is not mandatory to do it but it allows faster hotstart ). As the other people said, the configuration was initially 9600baud/1Hz. It was easy to change it to 38400Baud/ 5Hz with Ucenter. Once the new configuration is saved, it looks like the GPS doesn't work with Ucenter anymore (no more satellite capture), but once plugged to an APM, it works fine (I tested that with others ublox6 and it is the same strange behavior...). I tried to download the 3DR configuration file but it didn't work : The changes need to be done manually in the Ucenter. The configuration is kept well in the gps (some other reviewers said it was not retained). The size and weight is very appreciable for my QAV250. I just hope HK will update/replace this bad diode and put the right configuration before sending it to the others customers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It was needed to replace the diode which is in serie with the battery (the original one was a 0,5V one and I put a 0.2V one instead to get a better charge level of the battery, It is not mandatory to do it but it allows faster hotstart ). As the other people said, the configuration was initially 9600baud/1Hz. It was easy to change it to 38400Baud/ 5Hz with Ucenter. Once the new configuration is saved, it looks like the GPS doesn't work with Ucenter anymore (no more satellite capture), but once plugged to an APM, it works fine (I tested that with others ublox6 and it is the same strange behavior...). I tried to download the 3DR configuration file but it didn't work : The changes need to be done manually in the Ucenter. The configuration is kept well in the gps (some other reviewers said it was not retained). The size and weight is very appreciable for my QAV250. I just hope HK will update/replace this bad diode and put the right configuration before sending it to the others customers.

Completely useless thing. 2.3V battery, no memory, antenna without amplifier. Factory setup 1Hz, 9600 bit / s. Changed settings are kept for 5 minutes, then return to the factory. In 30 minutes can't defined position. Do not throw away money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Completely useless thing. 2.3V battery, no memory, antenna without amplifier. Factory setup 1Hz, 9600 bit / s. Changed settings are kept for 5 minutes, then return to the factory. In 30 minutes can't defined position. Do not throw away money.

Takes forever to get a fix. Does not like to save compass settings. And works great for a smaller quad where weight and space are limited. I do not recommend this product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Takes forever to get a fix. Does not like to save compass settings. And works great for a smaller quad where weight and space are limited. I do not recommend this product.

Mine arrived missconfigured (9600 Baud) without a chance to update the Settings...Button Cell only loads to 2.8 volts (after 48h) and even after re-solder the antenna it took hours to get a Fix..
absolute worst GPS i ever had...no way to get this thing to work...

:-(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine arrived missconfigured (9600 Baud) without a chance to update the Settings...Button Cell only loads to 2.8 volts (after 48h) and even after re-solder the antenna it took hours to get a Fix..
absolute worst GPS i ever had...no way to get this thing to work...

:-(

HKPilot Micro GPS and Compass Module U- Download [626]
HKPilot Micro GPS and Compass Module U- Download [584]
No File Name Download [0]
Naze32 pinout Download [39]
CC3D Connection Download [87]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save