注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

HobbyKing 1.5M DLG复合1500毫米(ARF)

HobbyKing 1.5M DLG复合1500毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
3450
SKU:
9339000005-0

acc
产品介绍

铁饼推出滑翔机,遥控飞行的最纯粹和最简单的形式。该HobbyKing 1.5M复合DLG铁饼启动滑翔机也不例外。滑翔机和发射器在手,任何打开的空间成为放飞场。单个电池可以持续的热狩猎乐趣小时。没有绞盘或高开工需要。通过铁饼式的发射行为产生以最小的代价最高的发射。

该HobbyKing 1.5M复合DLG是一个欧洲水平的质量和精度,具有HobbyKing水平的价格标签。手工成型最好的碳纤维,芳纶及玻璃纤维布,这种模式渗出真棒。打开你招呼到1个真空箱袋装蓝色泡沫芯翼。碳/芳纶布铺在45度偏置这给torisionally刚性机翼,而碳纤维梁帽给longitudal力量。翼尖发射PEG来单独让您在根据喜好推出右翼尖任左侧安装。活铰链,大尺寸副翼两舵机允许你运行它们作为皮瓣充实弯度,如果使用6+通道无线电系统设置。

机身吊舱玻璃钢模压用一个漂亮的胶衣完成,而螺旋缠绕锥形碳热潮持有尾羽和微型推杆。尾巴是在聚氨酯泡沫芯材真空袋碳磨砂皮。

预制的程度是惊人的。可作为一个几乎箭在弦上(ARF)和即插即用飞(PNF)选项。任一选项可以与最小的工作在空气中。这种模式是伟大下降到最微小的细节。永螺栓孔有铝嵌件,以防止泡沫破碎,如果你太远拧紧。硬件过于足以在同一时间做工作,但重量轻。

出在外地,以最小的努力,巨大的发射高度可以实现的。在1.5M复合容易减慢即使没有襟翼,使手渔获量,最大限度地减少损失的时间,竞争很重要。利用该模型的质量和飞行性能,席卷当地的竞争是很容易。除了是一个伟大的铁饼推出热滑翔机,在1.5M复合还擅长在风上斜坡模式约15英里每小时。在非常干净的设计使得它能够穿透风,即使它很轻。

一定要给这个模型一个尝试,你会很高兴你没有。

特征:
•几乎箭在弦上 - 完成最后组装,安装伺服系统,接收器和电池的选择
•真空袋装芳纶/泡沫芯翅膀CF增强
•碳林冠和螺旋缠绕碳锥形尾桁
•玻璃纤维机身荚CF增强
•碳增强泡沫尾翼
•可移动1个座,便于运输
•实时皮肤铰链副翼
•重量轻控制硬件

眼镜:
翼展:1500毫米
长度:775毫米
机翼面积:23.0平方分米
翼载荷:12.4克DM2
翼型:AG45,AG46,AG47
飞行重量:285克

要求:
2+通道发射机和接收机
4×8克舵机
300毫安时〜500mAh的2S Lipoly(RX电源)
UBEC

Product
Specifications

额外信息

  • 商品编号:
    9339000005-0
  • Brand:
    N/A
  • 重量(g)
    3450.00
  • 长度
    1650.00
  • 宽:
    210.00
  • 高度:
    300.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Sorry but I also forgot to mention that the plane trimmed out nearly perfect first flight. I have had about 50 now and it tracks straight and true. Only issue was with the peg, which I have reenforced with fiberglass along the outside of the peg. Solid as a rock now.
You can guess by now I have had a couple of hard landings and I am pleased to say that I have detected no damage what so ever!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Seems my first review didn't make it. So I will try again.
This plane is well designed and manufactured. ArtSky and HK did an excellent job. The build was simple except for the critical nature of getting the control rod z bends spot on, which I did not the first time.
I reenforced with fiberglass the fuselage where the fin slides into it, and the fuselage to stabilizer jointer.
Balance was at 77.5 with 5 grams added in the area where the electronic are housed. I used Velcro to mount the electronics: I used a 320 2s with a BEC, and orange receiver without the case and 4 dymond D47 servos. Tight, but everything fit well.
Wings are very stiff and no twisting, fuselage is reenforced with CB and the nose has a little extra in it as well.
If you are on the fence with this one you will not be disappointed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wrote a review earlier and made a mistake about the manufacturer, it is ArtSky - this model seems to be a cross between their 2 and 3 model.
If for some reason I don't see my initial review, I will try again. Great plane and flies like a dream.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • 1.5M DLG

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。