注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

HobbyKing 1.5M DLG V2复合1500毫米(PNF)

HobbyKing 1.5M DLG V2复合1500毫米(PNF)

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 533.92
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
3186
SKU:
9339000006-0

Price War

产品介绍

铁饼推出滑翔机,遥控飞行的最纯粹和最简单的形式。该HobbyKing 1.5M复合DLG铁饼启动滑翔机也不例外。滑翔机和发射器在手,任何打开的空间成为放飞场。单个电池可以持续的热狩猎乐趣小时。没有绞盘或高开工需要。通过铁饼式的发射行为产生以最小的代价最高的发射。

该HobbyKing 1.5M复合DLG V2是一个欧洲水平的质量和精度,具有HobbyKing水平的价格标签。手工成型最好的碳纤维,芳纶及玻璃纤维布,这种模式渗出真棒。打开你招呼到1个真空箱袋装蓝色泡沫芯翼。碳/芳纶布铺在45度偏置这给torisionally刚性机翼,而碳纤维梁帽给longitudal力量。翼尖发射PEG来单独让您在根据喜好推出右翼尖任左侧安装。活铰链,大尺寸副翼两舵机允许你运行它们作为皮瓣充实弯度,如果使用6+通道无线电系统设置。

DLG的V2机身吊舱成型为更好的刚性碳纤维增强材料芳纶,而螺旋缠绕锥形碳热潮持有尾羽和微型推杆。尾巴是在聚氨酯泡沫芯材真空袋碳磨砂皮。

预制的程度是惊人的。可作为一个几乎箭在弦上(ARF)和即插即用飞(PNF)选项。任一选项可以与最小的工作在空气中。这种模式是伟大下降到最微小的细节。永螺栓孔有铝嵌件,以防止泡沫破碎,如果你太远拧紧。硬件过于足以在同一时间做工作,但重量轻。

出在外地,以最小的努力,巨大的发射高度可以实现的。在1.5M复合容易减慢即使没有襟翼,使手渔获量,最大限度地减少损失的时间,竞争很重要。利用该模型的质量和飞行性能,席卷当地的竞争是很容易。除了是一个伟大的铁饼推出热滑翔机,在1.5M复合还擅长在风上斜坡模式约15英里每小时。在非常干净的设计使得它能够穿透风,即使它很轻。

一定要给这个模型一个尝试,你会很高兴你没有。

特征:
•几乎箭在弦上 - 完成最后组装,安装电子选择
•第2版配芳纶/碳机身荚更大的耐用性
•真空袋装芳纶/泡沫芯翅膀CF增强
•碳林冠和螺旋缠绕碳锥形尾桁
•玻璃纤维机身荚CF增强
•碳增强泡沫尾翼
•可移动1个座,便于运输
•实时皮肤铰链副翼
•重量轻控制硬件

眼镜:
翼展:1500毫米
长度:1135毫米
机翼面积:23.0平方分米
翼载荷:12.4克DM2
翼型:AG45,AG46,AG47
飞行重量:285克

要求:
3+频道发射器和接收器
300毫安时〜500mAh的2S Lipoly(RX电源)
UBEC

Product
Specifications

额外信息

  • 商品编号:
    9339000006-0
  • Brand:
    HobbyKing
  • 重量(g)
    3186.00
  • 长度
    1630.00
  • 宽:
    200.00
  • 高度:
    300.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
before i begin my review i sorry for my bad english.

this model flies very good but thare are some points to notice and possible upgrades for this beautifull model(more upgrades on rc groups).
the electronics i used besides the standard servos is
-a fireworm lc 16340 1000mah 3.7v becouse it was a round cell(20gr 15gr ballast).
i also bought a 500mah smartlipo but i do not recommand it becouse it is not round and too light.
-and a hobbyking tr6a v2 reciever.
(-without a bec)
(-a voltage alarm is a must (but cant find a 1cell)(crashed but luckaly no damage!)

i recommand using the included fibreglass tisseu to epoxy the horizontal stabilazor(especialy the rounded part on the boom)(broke 2 times luckaly no extra damage).
also the pushrods inside the keflar pod broke loose recommand extra flexible gleu(its hard to get in thare!).

i wish the aileron pushrods ware extendable for easy adjustment.
and i wish the aileron servos would be easely removable becouse thea are too large and could be better quality.

my total weight is 301 grams but could be reduced if using spring pull system
i hope my review will help people
regards
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought a V2 during the sale as a replacement for my beaten up Versus. It's a great entry level DLG with better wing and pod materials. Strengthened the boom to pod join and added extra epoxy to the wing mount nuts because they are a bit suspect. Changed the pod servos for Dymond D47 and moved the tray forward. WARNING the provided CA glue is not foam safe. It dissolves the wing core foam. Hobby King, you need to address this mistake.
It's OK at the sale price but way overpriced otherwise.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The model is really good. Flies smoothly, without any jokes :) The fuselage pod is molded kevlar with carbon reinforcement ...very nice
Wing servos are OK but too thick. You'll need 8mm sercos like D47
DLG for beginners and intermediate skilled pilots. Lokks very similar to TopSky DLG's :)
Weight @ all = 280g incl. 300mAh 2S Lipo, Reciver, BEC and all servos.
Not bad!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane and great value. Easy build. I found the reccomended cg range 78-84 to be a little to far back. I would reccomend starting somewhere between 75-78 mm behind leading edge. I did have to add some weight to the nose to get it to balance correctly. I also had to shorten the carbon on the aileron push rods to prevent binding.
Overall im pleased with this DLG, only a few smalll modifications were needed to get her into the air. European style build and quality, hobby king pricing!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • HK 1.5M DLG

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。