HobbyKing中型重型型号支架 - 这容易组装，坚固和良好品质的立场是适合大型模型飞机和船只，它具有非研磨而坚定的泡沫支撑垫和可调武器。支架已经减轻，是平板包装，以减少运输成本，并且可以在双快的时间进行组装！长度：560毫米（立止）身高：210毫米（立止，公司没有武器）
NICEPRODUCT FOR THE PRICE WELL CONSTRUCTED ONLY THING IS THAT YOU HAVE TO GLUE IN THE 2 BLACK RODS NOT REALY PRACTICAL AS WILL HAVE TO STAY ASSEMBLED AND THEN YOU CANNOT PULL APART IF YOU WANT TO STORE IT.The design is straightforward. The two tubes connect via inserting in the laminated end pieces. I bought this medium and the large size, both have no provision for retaining the tubes in position in the ends. Most designs would provide an insert in the tube with through bolt to clamp it in position. This had nothing other than a too lose press fit so I simply glued them in place with Gorilla Glue. Spray some water to accelerate the bond and drying so they become one assembly. The CNC routing of the wood was nicely done but the edges were sharp which required some rounding over with sandpaper. ]
Both sizes (medium and large) are fully adjustable. Well done other than lacking a key design element (fastening the tubes) and holes for the tubes too large for a press fit.
excellent stand, use for most of my planes. Took to club, many people liked and have now purchased, will be buying large stand for sure.This is a great stand super well made very strong and worth the money. However I recommend gluing the rods in because the smelliest movement and they come out.Gutes stabieles Teil. Muss nur richtig zusammengeklebt werden.Excellent quality stand, very easy to put together and strong construction. I have both the medium and large versions. In my opinion, the medium size is suitable for almost all aircraft. I have a Skywalker and Gliderman and both fit balanced on the medium stand. I would make a recommendation to fill each hole the carbon rods slot into, with lots of hot glue. This will make it very strong as without any glue they will have a tendancy to come loose. Happy flying!Brilliant. I got this for use on the workbench when fitting out my models. Simple to put together. Light and strong. I may get its bigger brother for use at the field.Fantastic quality! I built a small wooden frame with nylon ties so that I can securely fasten this stand to a small work bench at the field. I can then set up my model while standing up instead of kneeling on the ground. The stand is made from very high quality plywood and the foam padding is securely glued (doesn't come off like some others). The swinging arms can handle even large size models and have ample foam padding to protect the the most delicate of scale models. Great value and highly recommended.I am very pleased with this stand, I epoxied the two tubes on like others suggested and I am able to lift a 8lbs warbird from one end of the stand without issues. Great buy.Cracking stand at a great price. Connecting poles are a little loose, but a wrap of insulating tape will sort.