New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HobbyKing红砖50A ESC(光电)

HobbyKing红砖50A ESC(光电)

Discontinued Product

Please continue searching for a similar product.
SKU:
RB50A
WANT FREE SHIPPING? Click here to find out more!

该HobbyKing红砖胚胎干细胞不会赢得第一名的风格,但他们将采取最高点,简单性和可靠性。有了一套基本的编程功能,这些胚胎干细胞是任何人寻找一个基本而强大的速度控制器的完美解决方案。

眼镜。
最大安培:50A
UBEC:
电池:2〜7S Lipoly
尺寸为60mm毫米x 14毫米35毫米
重量:40g(含线)

用户手册中。

  • SKU RB50A
  • Brand HobbyKing
  • 容量(mAh) -
  • 重量 63.0000
  • 长度 80.00
  • Packaging Width 20.00
  • 高度 40.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Got two of these for a twin warbird. Tested on 6S, amp not exceeding 35A. Everything is fine. Installed in warbird. As I was taxing for the maiden, one of the them failed. Heatsink very warm to the touch, even though engine not running.
Will file a warranty claim. Caveat emptor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got two of these for a twin warbird. Tested on 6S, amp not exceeding 35A. Everything is fine. Installed in warbird. As I was taxing for the maiden, one of the them failed. Heatsink very warm to the touch, even though engine not running.
Will file a warranty claim. Caveat emptor

It doesn't feed my receiver, i've tested my plane with another ESC and everything works great but with this ESC the receiver lights stay off and the servos doesn't work.
I tried to feed my receiver throw the telemetry connection to be sure that the connector was working and it's all fine!
I'll never by nothing from red brick again, i'm glad that the problem happened before my flight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It doesn't feed my receiver, i've tested my plane with another ESC and everything works great but with this ESC the receiver lights stay off and the servos doesn't work.
I tried to feed my receiver throw the telemetry connection to be sure that the connector was working and it's all fine!
I'll never by nothing from red brick again, i'm glad that the problem happened before my flight.

First up>>> THIS IS NOT OPTICALLY CONNECTED...
The heatshrink on mine was badly fitted so I removed to fit a new piece. I was stunned to see that the wire of the receiver lead was just cut back 5mm from the end. I did a test with a short lead and connected the wire to it's solder pad on the esc. This unit HAS A BEC. The receiver lit up with power fed from the esc.
As a std esc with bec I could not fault the item. Good soldering. Massive heat sinks on both sides of the board. Put 50amps thru it for 5 mins and it was warm to touch but not hot. Mine has 10gauge wiring fitted so good conducting from the battery.
Disappointed that it doesn't suit my needs but will make a handy spare for some other project.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First up>>> THIS IS NOT OPTICALLY CONNECTED...
The heatshrink on mine was badly fitted so I removed to fit a new piece. I was stunned to see that the wire of the receiver lead was just cut back 5mm from the end. I did a test with a short lead and connected the wire to it's solder pad on the esc. This unit HAS A BEC. The receiver lit up with power fed from the esc.
As a std esc with bec I could not fault the item. Good soldering. Massive heat sinks on both sides of the board. Put 50amps thru it for 5 mins and it was warm to touch but not hot. Mine has 10gauge wiring fitted so good conducting from the battery.
Disappointed that it doesn't suit my needs but will make a handy spare for some other project.

This ESC has really nothing special i even doubt it has Opto inside. The heat sink are massive, which is good on one hand but it's really heavy... Also they say there is no Ubec inside, which is not truth, they have just cut the red wire but after opening i confirm there is a 5V ubec inside. They pretend it's an Opto because most of the time interferences from brushless come back through ESC 5V red wire, so they just cut this wire and sell is as an opto... It's efficient for interference, but for this i could have done on one of my ESC... The best we can say, it's is not a state of the art ESC... Just a cheap chinese ESC well protected with oversized heatsink

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC has really nothing special i even doubt it has Opto inside. The heat sink are massive, which is good on one hand but it's really heavy... Also they say there is no Ubec inside, which is not truth, they have just cut the red wire but after opening i confirm there is a 5V ubec inside. They pretend it's an Opto because most of the time interferences from brushless come back through ESC 5V red wire, so they just cut this wire and sell is as an opto... It's efficient for interference, but for this i could have done on one of my ESC... The best we can say, it's is not a state of the art ESC... Just a cheap chinese ESC well protected with oversized heatsink

This ESC has really nothing special i even doubt it has Opto inside.
The heat sink are massive, which is good on one hand but it's really heavy...

Also they say there is no Ubec inside, which is not truth, they have just cut the red wire but after opening i confirm there is a 5V ubec inside.

They pretend it's an Opto because most of the time interferences from brushless come back through ESC 5V red wire, so they just cut this wire and sell is as an opto...
It's efficient for interference, but for this i could have done on one of my ESC... The best we can say, it's is not a state of the art ESC...

Just a cheap chinese ESC well protected with oversized heatsink

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC has really nothing special i even doubt it has Opto inside.
The heat sink are massive, which is good on one hand but it's really heavy...

Also they say there is no Ubec inside, which is not truth, they have just cut the red wire but after opening i confirm there is a 5V ubec inside.

They pretend it's an Opto because most of the time interferences from brushless come back through ESC 5V red wire, so they just cut this wire and sell is as an opto...
It's efficient for interference, but for this i could have done on one of my ESC... The best we can say, it's is not a state of the art ESC...

Just a cheap chinese ESC well protected with oversized heatsink

No trae manual y no puedo hacer que funcione, no puedo usarlo.
Parece que tiene buena pinta pero no consigo hacer que funcione.
Atentamente.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No trae manual y no puedo hacer que funcione, no puedo usarlo.
Parece que tiene buena pinta pero no consigo hacer que funcione.
Atentamente.

Great esc for upgrading floater jet

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great esc for upgrading floater jet

So far I'm pretty impressed with it. used it in a greatplanes sequence with a ntm3542-1000. Worked right out of the bag.Throttle response is just as fast as I want it(not superfast).The current is on the edge in my setup and it does'nt overshoot on me although I use nanotech 35-70c batteries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far I'm pretty impressed with it. used it in a greatplanes sequence with a ntm3542-1000. Worked right out of the bag.Throttle response is just as fast as I want it(not superfast).The current is on the edge in my setup and it does'nt overshoot on me although I use nanotech 35-70c batteries.

No tem BEC (regulador interno 5v)! Precisa de um BEC adicional.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No tem BEC (regulador interno 5v)! Precisa de um BEC adicional.

tres bon esc bien refroidit grace au grand radiateur

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

tres bon esc bien refroidit grace au grand radiateur

  1. 1
  2. 2
  3. 3
  4. 4
Manual Download [80]
USE THIS ONE Download [1008]
Element base of Red Brick Download [660]
Element base of Red Brick Download [660]
Element base of Red Brick Download [660]
No File Name Download [122]
manual from supermodels.com Download [26]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!