你生病航拍摄像头船看上去像一个飞碟的飞行和缓慢的，光滑如你正在做奶奶周边的街区散步？ HobbyKing谈到与新超级-H 600救援。
I used this frame for a short time, because the holes are done badly. With well balanced 15" props there are too much vibrations even for a gimbal!!! It's not stable at all. When you will use it, use it with small motors and 12" props max. The max flight time I got with it was 30min, but it wasn't a nice flying via fav, because of the vibrations I hardly could see anything!!!What a waste. You get what you pay for. I ended up with genuine CW props and knock-off CCW props, and the slight difference in thrust at the same motor RPM caused the frame and super flexible arms to twist and yaw the quad in circles. Though correctly matching props are clearly called for, the HUGE amount offlex in the arms and lower / dirty frame of this quad made it a complete waste of my time to build. My AUW was around 2.5kg - I tried to build this around a 6s 4000mah system and a mid-size gimbal and camera. I suspect this would only work with a GoPro and a lightweight setup.Awful kit. Don't buy it. Very flimsy, not well machined. The frame is not symmetrical when assembled.simple fantastic. i have not used this for long but it is my first Quad copter frame and i think that it has been a good one to chose. I have been using it on grass and it has suffered lots of accidents but all in all it was great and there is NO damage to the board. i would recomend you use the NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version) motors and the Afro ESC 30Amp Multi-rotor Motor Speed Controller (SimonK Firmware) ESC's with Slow Fly Electric Prop 12x4.5R SF (4 pc - Green Right Hand Rotation) propellers as well as left hand turning ones and a 4 cell battery for me this set up has worked great. thanks for reading this, cyaYou pretty much get what you pay for. I've ordered this frame before and it was beside one drill hole fine. The second was missing all the drill holes for the rubber balls. Not a big deal for me. And the rest of the frame is descent and if you crash it (like I did), the replacement is not that big of a deal. I recommend this frame.This is nice big frame with a lot of space on it and it is cheap.
However it has few drawbacks:
- it is heavy, 500g
- arms could be longer, they can fit maximum 13" props
- little too elastic for my taste
- plates are made of tick plexiglass (12.5mm) instead of carbon fiber
- there are no hols for rubber dumpers, and once you drill it your self those holes violate structural integrity of plates
- holes made for gears on plates are made in a way that makes you difficult to attach some of your gears so you have to improvise
All 4 arms are black but I like it that way, it looks cool, and if you want better orientation you can put some colorized LEDs.
I have put some pictures in file section of my build. I'm using Multistar Elite 4007.740 motors, 12" 5.5peach propellers, 4.5Ah 3s battery, Crius v2 FCB and 20A Afro Slim ESC. total weight is 1750g, but I plan to add one more 4500mAh battery and d13" 5.5peach props. That should give me 15 minutes of flight time with good maneuverability.
This is a great frame. I have 14 inch blades on this build. If you do Use 14 inch props you will be cutting in close but still it makes for a nice long flight time! I suggest the use of m3x11MM vibration isolation grommits! They fit well! Enjoy!2210 turnigyA lot of gear for little money!
Nice easy build, some spares in mine (I hope they're spares!) And plenty of room. SJ400, APM GPS, 4x ESCS, FrSky Rx, FPV cam, Vtx and batt. And enough room to fit it all on again.As of January 2015 do NOT order this kit. The first time I ordered it, all that came in the box was a set of 4 black arms. Not sure if they were even for this kit or not. Filed an RMA, jumped through the hoops, got the 'replacement' shipped out and what greeted me when I opened the box? Another set of 4 black arms and nothing else. Clearly they are having an issue with the system, so this is a friendly heads up to everyone!
No File Name download now [3519kb] folding version download now [476kb] folding version download now [476kb] folding version download now [476kb] perfectly tuned and tested build i have download now [391kb] front view of gimbal mount with out cont download now [3130kb] top view of just mounted gimbal download now [2969kb] side view of my gimbal mounting system download now [3438kb] Quad Just built and flown download now [558kb] No File Name download now [3035kb] H600_01.jpg download now [403kb] H600_02.jpg download now [460kb] H600_03.jpg download now [392kb] H600_04.jpg download now [454kb] H600_05.jpg download now [436kb] New Build-Untested download now [0kb]