的X GYRO 1000是一个两轴头跟踪系统，基于G传感器技术，旨在用于跟踪复杂的三维运动像头移动等，它也可以在控制无人驾驶飞机和机器人，转印三的区域中使用从手三维运动信号，人的头在遥控模型，无人驾驶飞机或机器人相应的运动系统。
的X GYRO 1000的基本版本是专门为遥控模型用FPV（初个人版）设计的，它可以完全与主流发射器或将与无线高频模块化独立地共同操作使用。它可以在运动信号传送到发射机，和发射机可以发送出头部运动或头部的位置的信号（在两个轴），从而使真实的同步，可以实现当屏幕上显示的视频图像的护目镜， 用户可以环视就好像他是在遥控模型内 。因为它是用在当今市场发射机兼容，很容易和直截了当使用。其最大的优点是，有没有必要有任何固定参照物以检查和测量的RC模型的拐点的位置，并在所有的时，它是在一个静止状态与需要利用非常复杂的其他产品相比没有漂移参考设施或手动控制发射器。
渠道：X轴 - 通道7 Y轴通道8
not impressed with the tracking capability of this unit. add a 3 axis Accelerometer and Magnetometer. and you might have something worth buying.When trying to use with the 9XR and Futaba plug, you have 2 choices solder some wires and hope, or the following. The Futaba plug has 2 ppm wires JR only uses one (HT only uses one) so simply open the radio, unplug harness for Futaba plug (right side) and unplug the JR plug (left side) and plug the Futaba port into that socket. This allows the HT to work with no soldering and no change in settings minus adding the PPM signals to the right channels. Other then that seems to work great and no issues on my Bix3.Good little unit. Naturally I had to hack it... I pulled it out of the case and found that it would fin inside the tiny air space of a FatShark Predator V2 goggle. Added a 3.5mm jack and wired up the switch and glued it in place and Voila... a Predator goggle with built in head tracker. Works perfectly., , . .This head tracker drifts very badly, it is fairly useless as you will be resetting the center every 10 seconds literally!
it is not worth a purchaseGot this up and running with the FrSky Taranis. The Taranis is a great match for the gyro, as it's got plenty of programming possibilities. It did require some soldering of a JR-style trainer connector, however not on a too difficult level.
For all those asking "does this work with radio X", check if your radio can assign custom channels to the trainer connector. If that's the case, it will work for your radio, but may require some soldering work. The two connectors shipped with the unit fit the 6-pin square connector and 6-pin large DIN which both are for Futaba radios.
I got one a while back, works with Hitec Eclipse 7 (72mhz) But now I use it with my Turnigy 9x (2,4ghz) You will need to re-locate the reset button to the transmitter because the drift is really annoying and you will be constantly resetting it. I wasn't impressed. I have the round connector spare if anyones interested. RC Groups - HeadspinGood headtracker but nothing is perfect.
Works perfect with my T9xMy gyro is drifting so much on one of the channels that it make it useless, I can only use it as a one axis gyro.
The soldering inside the gyro was very badly made with damage on the connectors.
The same thing in the Futaba trainer plug.
The reset switch is glued inside the plastic case. The same thing with the circuit board, it is only fixated in glue inside the plastic case.
I would not recommend this product., , , . .
Very poor quality gyros, the center is constantly going.
XGY-1000 headtracker download now [216kb] radio Multiplex & X-Gyro download now [57kb] RC Transmitter PIN Settings download now [3222kb] Head Tracker to Graupner MC24 download now [684.57Kb]