New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HobbyKing X22喷气EPO查滑翔机

HobbyKing X22喷气EPO查滑翔机

Discontinued Product

Please continue searching for a similar product.
SKU:
041000177-0
WANT FREE SHIPPING? Click here to find out more!

该HobbyKing EPO喷气滑翔机查克小车型,但都是大乐趣。一个完美的礼物为孩子们。经过全面的战斗机模型模拟松散的,我们提供了三种不同的设计选择。简单的组装,为乐趣小时。作为一个挑战,这是一个有趣的DIY转换为无线电控制。每个模型都有一个模压橡胶鼻锥,以帮助保护模型时,它的土地。代替折皱泡沫,橡胶鼻吸收冲击。

在后院的乐趣慵懒的夏日天,带他们到海滩或在任何你想要的!

特征:
•超韧EPO建设
•组装简单
•模压橡胶鼻锥吸收冲击登陆
•3个半规模的设计选择 - X16,X18,X22

眼镜:
翼展:295毫米
长度:400mm
重量:33克

  • SKU 041000177-0
  • Brand HobbyKing
  • 容量(mAh) -
  • 重量 435.0000
  • 长度 450.00
  • Packaging Width 50.00
  • 高度 315.00
  • Chuck Gliders

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I got one of these and the X16 (see my review). Great little glider for kids and adults alike. Compared to the X16, this one is a little more durable and it has nice little finger holds molded into the bottom of the fuselage to aid in throwing it (nice!). This one flies good, but the X16 flies a little better IMO. Highly recommend both of them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got one of these and the X16 (see my review). Great little glider for kids and adults alike. Compared to the X16, this one is a little more durable and it has nice little finger holds molded into the bottom of the fuselage to aid in throwing it (nice!). This one flies good, but the X16 flies a little better IMO. Highly recommend both of them.

Ne ho gia acquistati 4 o 5. Mio figlio di 4 anni ne va matto. Anche abbastanza resistente. Se opportunamente regolato, vola da Dio

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ne ho gia acquistati 4 o 5. Mio figlio di 4 anni ne va matto. Anche abbastanza resistente. Se opportunamente regolato, vola da Dio

Very strong epo construction and glides forever a must have for free flight models fans

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very strong epo construction and glides forever a must have for free flight models fans

Extremely good glider I'm going to make this a remote control

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Extremely good glider I'm going to make this a remote control

Nice and sturdy chuck glider, but mine weighs 45g instead of the 33g in the specs. That's 36pcnt more weight than expected!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice and sturdy chuck glider, but mine weighs 45g instead of the 33g in the specs. That's 36pcnt more weight than expected!

Full review didn't show up... great as free flight birds. remove rubber nose and insert a 3-4 inch long carbon rod. eliminates the weak spot in the nose. To be clear these are really tough, its just if you break it the nose is the spot! Reglue rubber nose cap and you are off!
RC works for 16 and 18. cut off stabs cut snug pockets for turnigy 1440 servos and glue stabs directly to out put shaft and screw... skip the servo horn. x-18 balance at 25mm behind LERX/ wing junction. x-16 start at about 10mm in front of the stock CG. using 180 2 cell lipo and elevon programming on both. x-18 is about 1/41st scale and x-16 is almost exactly 1/32 scale. ordered 1/32 and 1/48 scale decal sheets for both! model master enamel paint works great even when using laquer thinner to thin for spraying. quick and easy. 16 is 69g with paint ready to fly and the 18 is 59g all up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Full review didn't show up... great as free flight birds. remove rubber nose and insert a 3-4 inch long carbon rod. eliminates the weak spot in the nose. To be clear these are really tough, its just if you break it the nose is the spot! Reglue rubber nose cap and you are off!
RC works for 16 and 18. cut off stabs cut snug pockets for turnigy 1440 servos and glue stabs directly to out put shaft and screw... skip the servo horn. x-18 balance at 25mm behind LERX/ wing junction. x-16 start at about 10mm in front of the stock CG. using 180 2 cell lipo and elevon programming on both. x-18 is about 1/41st scale and x-16 is almost exactly 1/32 scale. ordered 1/32 and 1/48 scale decal sheets for both! model master enamel paint works great even when using laquer thinner to thin for spraying. quick and easy. 16 is 69g with paint ready to fly and the 18 is 59g all up.

No doubt that this little F22 will be a very nice micro R/C PSS soarer ... :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No doubt that this little F22 will be a very nice micro R/C PSS soarer ... :)

looks like the F22 isn't it ?

Very good chuck glider

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

looks like the F22 isn't it ?

Very good chuck glider

First impressions are that it is very nice, it test glided well although I plan to add a tiny bit nose weight, rc conversion mmmm, plenty of room in the fuz to house rc and appears to have enough wing area to make it work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First impressions are that it is very nice, it test glided well although I plan to add a tiny bit nose weight, rc conversion mmmm, plenty of room in the fuz to house rc and appears to have enough wing area to make it work.

all three of these are good fliers if you add just a little weight to the nose. I recommend tape, this will help in the long run as the nose is going to snap off anyways,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

all three of these are good fliers if you add just a little weight to the nose. I recommend tape, this will help in the long run as the nose is going to snap off anyways,

  1. 1
  2. 2
No File Name Download [2504]
No File Name Download [2638]
No File Name Download [576]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!