注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Hobbyking X650F玻璃纤维四轴飞行器框架550毫米

Hobbyking X650F玻璃纤维四轴飞行器框架550毫米

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
1159
SKU:
9323000048

esc
battery
motor
acc
产品介绍

该Hobbyking X650F是一种高品质的折叠臂四轴飞行器框架,在不能被打败的价格提供了巨大的外观和性能!在X650F从轻质而坚固的玻璃纤维和铝合金建造,提供节省重量和力量的完美结合。

这四配折叠臂,这使得它便于运输和存放。武器也是两种不同的颜色进行定向,金色和黑色,所以很容易让你的四朝正确的方向飞行。作为通风ESC安装提供卓越的冷却玻璃纤维通用电机坐骑将适应广泛的电机和双。

这四架运动扩展起落橇,给你所需要的承载大多数相机的离地间隙。它采用了双轨道摄像机安装附件。 (请参见下面的相关项目可选摄像头安装)

我们提供全系列的多旋翼电子设备,如多旋翼控制板,ESC,电机和更多的,所以它从未如此简单或更实惠,在空中获得四!

所有必需的硬件包括,只需添加你自己的电子产品。

眼镜:
重量:598克(仅帧)
宽度:550毫米
身高:265毫米
离地间隙:155毫米(帧的底部),185毫米(摄像机安装导轨)
汽车螺栓孔:16〜30毫米

需要:
你自己的4通道发射机和接收机
多旋翼控制板
20〜40A无刷电调×4
3S 2200〜3000mAh的电池lipoly
28/35 900-1100kv无刷电机×4
9〜11英寸的螺旋桨×4(2标准/ 2反转)

Product
Specifications

额外信息

  • 商品编号:
    9323000048
  • Brand:
    HobbyKing
  • 重量(g)
    1159.00
  • 长度
    370.00
  • 宽:
    140.00
  • 高度:
    330.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great multirotor! It went together with only a few difficulties. Don't try to build it without any instruction, google a build video to help you.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very nice and quality frame, only one hole was 1mm away. Seems quite strong frame
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I really love this frame. Easy to put together. Don't put together until you can add your electronics or you will be taking it back apart. I wish it was a little taller between the levels. Not enough room for most transmitters, receivers or electronics that are packaged in a plastic case. Buying longer spacers would fix that. Legs are a bit bouncy and if you land hard, you will bounce up in the air. Arms do fold in which help with transporting. Over all, Im very happy with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
war mein erster Multikopter nach einem Blade NanoQX.
Habe die Entscheidung nie bereut und wrde den Frame jedem Anfnger empfehlen. Allerdings sollte man als Neuling das Landegestell ab lassen und z. b. Moosgummi Kltze unter die Arme kleben.
Ist recht schwer aber dafr haltbar und liegt ruhiger in der Luft als ein voll carbon Rahmen.

Benutze den Rahmen jetzt fr Tests z. b. mit neuen Flight Controllern oder Firmware Versionen die noch im alpha Stadium sind .

Das wichtigste fast vergessen: mehr als genug Platz um schnell und unkompliziert ein Quad aufzubauen selbst mit allem mglichen an Zubehr
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Quad.
Im yousing the tunrigy D2830 1000Kv Motors with 30a HK ESC.
10x4,5 Props and the Multistar 4000mAh Packs.
As flight controller I got the DJI Naza.
Geting about 7 Minutes of flight time with a Gitup GIT2 on it.
But you can mount two 4000mAh Packs for a few minutes more flight time.

Im flying it without landing gear for saving some weight.

I really recommend this quad for any type of use.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I love this frame! It is well built and has handled several moderate crashes. The only complaints I have are that my ESCs do not fit in the space beneath the motors and I've had a some of the screws rattle loose while flying. The legs are quite springy and give some added cushion on rough landings, but the spring makes it difficult to land without bouncing. There is ample space on the rails to mount additional hardware. I've mounted a raspberry pi, video tx, 5A battery and a fatshark pan/tilt/roll camera rig on the rails. Excellent frame!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the frame is well made and strong. works well with 1000kv motor, 30a esc, naza lite, fpv, osd, 5000mah 3s, 10x4.5 prop. crashed landing few times and still holding up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is really nice frame for the money. Using AFRO 30 ESC and AX 2810Q 750KV motors. Build was simple even though no instructions were included, I found them on the INT warehouse site.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
excellent frame, light but sturdy.
motor mounts are chunky and strong with no flex, much as is the rest of the frame.
As many have noted the legs are perhaps the only real flaw as their a little on the "light duty" side compared to the rest of the frame and tend to flex a little to much, that said they are still adequate enough to support the quad fully built a kitted out (minus any additional underslung gimbal).
That all said, my frame is currently fully kitted out and flying well with a full FPV setup on cheapo 1000kv outrunners and a dual battery rig without feeling the need to change out the landing gear for something more sturdy just yet (If the need arises there are plenty of low price options widely available to those that do feel the need)

ALL IN ALL, I heartily recommend this frame for LIGHT - MEDIUM lift builders (newcomers also as it can certainly take a few good mishandled bangs and survive... plus spare parts a readily available)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good quality. easy to build. but landing gears are not that good, they start stretching even when there is only a battery on the quad. expect the landing gear it has a nice frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • 500mm Quadcopter

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Manual - Hobbyking X650F Quadcopter Fram download now [274kb]
No File Name download now [274kb]
No File Name download now [274kb]
No File Name download now [274kb]
No File Name download now [299kb]
Modified boom and engine mount so esc ca download now [1696kb]
FPV_X650F.jpg download now [1788kb]
FPV equipped X650F download now [1588kb]
Assembled with NAZA download now [3076kb]
DIY canopy download now [1308kb]
X650F Canopy download now [1308kb]
No File Name download now [1726kb]
No File Name download now [2173kb]
No File Name download now [3497kb]
moutning FC download now [1823kb]
No File Name download now [274kb]
X650F Pic download now [728kb]
No File Name download now [530kb]
X650 Helipuerto en el Potrero 04 download now [158kb]
X650 Volando en el Potrero 00 download now [152kb]
X650 Volando en el Potrero 01 download now [168kb]
X650 Volando el el Potrero 02 download now [130kb]
Hobbyking X650F with Naza download now [151kb]
With NAZA download now [3076kb]
jpnc-finished download now [461kb]
jpnc -arm-finished download now [533kb]
jpnc-my-bird download now [275kb]
551617134X1082189X15.jpg download now [2792kb]
No File Name download now [2173kb]
No File Name download now [1597kb]
No File Name download now [2368kb]
third3son X650F download now [1707kb]
third3son X650F download now [1707kb]
Ready assembled. download now [574kb]
Full FPV PX4Flow Lidar Pixhawk download now [3913kb]
No File Name download now [3480kb]
paologenoa! download now [4272kb]
frame complete download now [146kb]

esc
battery
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。