车架重量：415克 （W /出电子）
2200〜3000mAh的3S 11.1V Lipoly
8,8〜10x4.3螺旋桨 - 2标准/ 2反转
注：所有HobbyKing X系列帧购买厂家直销。我们与工厂的工程师密切合作，以确保质量。所有X系列帧数控切割和不像许多由手低技术含量的工厂钻可以从eBay或中国厂商便宜帧精确研磨。该Hobbyking X系列还配备了为增加心肌力异同较厚的GF主要板块。
Haven't flown yet but the frame seems sturdy. Only hard assembly point is the attatchment of the springs on the legs.This was my first ever Quad frame. It wasn't the easiest to assemble without instructions (at the time).
If you purchase this I would recommend buying the X525 v3 Glass Fiber Motor Mount (which are out of stock at this moment) double them up when you build it to make it stronger.
I am having to buy a new frame because One snapped (very bendy) and from previous comments they havent been instock for atleast 2month...
Overall the frame is good but I think stronger Motor mounts are definately requiredLove this frame! Every thing assembled really well the one and only thing that will be changed is the landing gear springs are a little week if built on the heavy side. I will be just adding a heavier spring from a carb spring kit bought from my local auto parts storedurable quadcopter frame with all the features you would expect to find in a higher priced modelthats a great quadcopter frame. I use it with turnigy 900kv motors and afro esc with a 4s 5000mah lipo. as a FC I have the DJI Naza M Lite which works just fine. the radio is a frsky taranis x9d plus. I can recommend this frame to everyone who wants to build a really big quadcopter for aerial video filming or things like this.Gute Qualitt
Es sind 5 Arme dabei im Set um auch plusCopter bauen zu knnen mit farblichen Akzenten >> 3x Silber und 2x SchwarzIch bin mit dem Quadcopter Frame sehr zufrieden. Was ich jedoch nicht so gut finde ist, das man nicht alle Einzelteile im Nachkauf bekommt.Overall, a great frame. The arms are a little cheap, but then again you are not paying for titanium. When tightening down the screws on the arms make sure not to overnighten, as you will warp the metal. Oh and it comes with an extra arm!
This was the first frame I ever used and it had no problems handling crashes and erratic flying. The size is great too, it is a few mm shorter than 666mm though.I've had this frame for about 6 months now, and I do like it! But there are some weak spots on the frame.
My setup: hk380 flight controller, 3x multistar 30A OPTO, 1x multistar 30A SBEC, NMT 28-30 800kv 300w, 3s 4000mah, FrSky Taranis, FrSky X8R, power distribution board.
All power connectors where bought with 3,5mm bullet-connector for easy setup.
This frame have long arms, so remember to buy extention leads for ecs's.
Pros: Cheap, easy to assemble,
Cons: Landing struts are a bit fragile and there is no spares for them in the shop.This frame is perfect. This is the first quad I built. I used the KK2.1.5 controller, 4 Park480 motors, 30 amp esc's, and upgraded to the aluminum motor mounts - since my motors were larger than recommended. I then set my transmitter on an expo of 50 across the board, max throttle of 50pcnt, and took off for my initial flight. Trimmed it and it flew perfect. I used a painted bottom tray from a potted plant as a canopy.
Manual download now [3103kb] X666 Build Manual download now [3103kb] X666 Electrics download now [252kb] Electrics layout download now [302kb] No File Name download now [280kb] X666 by Salvio download now [3100kb] MY X666_pic download now [184kb] x666_pic1 download now [194kb] x666_pic2 download now [389kb] My X666 Virgilio Montpellier France download now [1731kb] My X666 By Julio de Montpellier download now [1731kb] x525-3 download now [89kb] Alt spring attachment download now [330kb] foam landing pads download now [3009kb] X525 Manual download now [1436kb] Jaffrin Build V1.0 download now [644kb] Quad 666 geared download now [427kb] Quad 666 geared prop download now [219kb] Quad 666 geared motor download now [335kb] Quad 666 FC and esc download now [387kb] x666_close.jpg download now [3.13Mb] X666 with KK FC download now [2.72Mb] X666 complete FPV download now [1.79Mb]